If you are going to change to manual, i'd change on all of your servers. Then you just need to keep up with any zone file changes...
Mike On Mon, Dec 12, 2011 at 10:30 AM, Cyril Constantin < [email protected]> wrote: > Hi, > > I have followed Sipx wiki and it looks to say that I need to put Manual on > all servers like it has been indicated in one of the comment of Josh patten > at the bottom of this link, he said *"That being said, the mode does need > to be changed to manual on all of the secondary servers, so I'll update the > page."* > > > http://wiki.sipfoundry.org/display/sipXecs/Location+based+DNS+views+for+sipXecs+using+BIND > > > > So regarding what you are saying Tony if I understood I need to change to > Manual on Master keep "Slave" on redundant make all my changes on Master > and do "send profiles" , is that correct? > > Regarding wiki link above they say: > > If the installer changes the DNS_MODE in named.conf from "Master" to > "Manual" then the *.zone file will no longer be automatically generated on > the primary server. The installer can then add additional DNS names to the > *.zone file and they won't get overwritten by the system. The installer > will then be responsible for changing the serial number in the zone file so > that it gets automatically copied to the slave DNS servers. > > In my case I expect that my changes are not overwritten by the system. > > Is not very explicit for my point of view on the wiki, if somebody can > clarify it for the way to proceed with manual change on master server? > > Thanks to all > > > 2011/12/12 Tony Graziano <[email protected]> > >> DNS MODE MANUAL is not suggested on an HA secondary system. It tends to >> break HA when you change it because the setting cannot be pushed down to >> the other servers. >> >> I think you might want to look instead at the timing of the records, etc. >> and whether you sent profiles after making the change to the master. >> >> On Mon, Dec 12, 2011 at 9:20 AM, cyril constantin < >> [email protected]> wrote: >> >>> Hi Guys, >>> >>> I have HA cluster with three servers. >>> >>> Like I have posted three months ago Bria 3.2.1 (the latest) doesn't >>> support DNS SRV with Weight of 0 for the three servers and will always use >>> the same server to register all phone which is annoying to load balance all >>> my users on the three servers so to prevent this problem I have changed my >>> zone and put a weight of 33 for all three servers which is working fine and >>> all users are load balanced on three servers, if I don't want to have these >>> settings erased by sipxecs I need to change the named.conf DNS_MODE to >>> manually, but I'm facing some issues when I'm changing it to manually on >>> all servers, I can't figure out it yet (incoming calls only works when >>> coming into primary when they are coming on the redundant servers the calls >>> goes straight to voicemail 's users) >>> >>> My current configuration: >>> 10.147.113.221 : primary server >>> 10.147.113.222 : redundant server >>> 10.147.113.223 : redundant server >>> >>> *I have tried on primary server to configure named.conf like below:* >>> >>> // DNS_MODE="Manual" >>> >>> options { >>> directory "/var/named"; >>> dump-file "/var/named/data/cache_dump.db"; >>> statistics-file "/var/named/data/named_stats.txt"; >>> forwarders { >>> 10.147.113.10; >>> 10.147.113.11; >>> }; >>> >>> >>> }; >>> >>> >>> zone "webcti.local" IN { >>> type master; >>> file "webcti.local.zone"; >>> allow-update { none; }; >>> allow-transfer { >>> >>> 10.147.113.10; >>> 10.147.113.11; >>> 10.145.108.10; >>> 10.147.113.222; >>> 10.147.113.223; >>> }; >>> allow-query { >>> 10.147.113.0/24; >>> 10.145.108.10; >>> }; >>> notify yes; >>> }; >>> >>> *On both redundant servers:* >>> >>> // DNS_MODE="Manual" >>> >>> options { >>> directory "/var/named"; >>> dump-file "/var/named/data/cache_dump.db"; >>> statistics-file "/var/named/data/named_stats.txt"; >>> }; >>> >>> zone "webcti.local" IN { >>> type slave; >>> file "data/webcti.local.zone"; >>> masters {10.147.113.221;}; >>> allow-notify {10.147.113.221;}; >>> notify no; >>> }; >>> >>> >>> on redundant servers into /etc/resolv.conf >>> nameserver 127.0.0.1 >>> >>> rndc reload and serial number increased and named service restarted on >>> primary server >>> >>> My incoming calls are coming from Asterisk to Sipxecs with sip trunk and >>> asterisk use srvlookup to resolve the zone webcti.local. It's working fine >>> until I change the named.conf to "Manual" and make my changes above. >>> >>> So if I use configuration above I have only one incoming calls on three >>> which is working. >>> >>> Any idea on this problem ? Do I miss something ? >>> >>> Can it be possible to have in Admin GUI a webpage where you can set the >>> weight per server (even priority) without modifying the DNS mode and keep >>> SIPXecs manage DNS ? >>> >>> >>> >>> Thanks a lot in advance for your help and any ideas will be appreciated. >>> >>> Best Regards. >>> >>> Cyril >>> >>> _______________________________________________ >>> sipx-users mailing list >>> [email protected] >>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >>> >> >> >> >> -- >> ====================== >> Tony Graziano, Manager >> Telephone: 434.984.8430 >> sip: [email protected] >> Fax: 434.465.6833 >> >> Email: [email protected] >> >> LAN/Telephony/Security and Control Systems Helpdesk: >> Telephone: 434.984.8426 >> sip: [email protected] >> >> Helpdesk Customers: http://myhelp.myitdepartment.net >> Blog: http://blog.myitdepartment.net >> >> Linked-In Profile: >> http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 >> Ask about our Internet Fax services! >> >> _______________________________________________ >> sipx-users mailing list >> [email protected] >> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >> > > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > -- Michael Picher, Director of Technical Services eZuce, Inc. 300 Brickstone Square**** Suite 201**** Andover, MA. 01810 O.978-296-1005 X2015 M.207-956-0262 @mpicher <http://twitter.com/mpicher> www.ezuce.com
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
