I don't think you follow me. HOW you have the Bria configured means a lot. I use 3cs on my iphones. I use eith csipsimple or on ICS I use the native sip account function (fine for wifi). I also use Patton gateways. I never have a problem with this.
There are settings in different UA's on how they handle STUN and NAT and whether they send an internal ip address. You need to make sure STUN/NAT/TURN is off and if there is an option to use the local (internal) IP address, you should select it. Beyond that I'll leave this for an iphone afficionadio to address. Why are you registering to 5061 (deselect TLS in the UA if you have it selected). Good luck. On Thu, Dec 29, 2011 at 11:36 AM, Pete Burgess <[email protected]> wrote: > Hi Tony**** > > ** ** > > Actually the UA seems to be acting fine. As I mentioned, I can make > internal calls so I’m not too worried about that. The problem is when an > outside call is made. Hooked up Briapath and pulled a log and here’s what I > get…**** > > ** ** > > [11-12-18]19:25:39.248 | Debug | RESIP:DUM | "mRemoteTarget: > <sip:[email protected]:5060;user=phone;transport=tcp>" | **** > > ** ** > > Now I don’t know SIP well enough to know if the above line is just a “hey, > here’s what’s going on at the backend” message or if the softphone is > trying to connect to 172.20.23.3, which is my Mediant. If that’s the case > then it’s not going to work as the call is being proxied to a private IP > address which is, obviously, not available externally.**** > > ** ** > > ** ** > > ** ** > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Tony Graziano > *Sent:* Thursday, December 29, 2011 11:08 AM > *To:* Discussion list for users of sipXecs software > *Subject:* Re: [sipx-users] Remote Users**** > > ** ** > > You ought to describe what iphone UA (app) you are using.**** > > ** ** > > #1: you should be registering over port 5060 (not 5061). 5061 assumes > tls/encryption, which will be quite a burden on any portable IMO. It's also > not fully functional in sipx with every UA yet either.**** > > #2: You should inspect your registration and make sure it states the > proper syntax for your registration.**** > > ex: sip:[email protected] < > sip:[email protected]:44252;x-sipX-privcontact=192.168.101.1>**** > > or**** > > sip:[email protected] <sip:[email protected]:5060;x-sipX-nonat> **** > > ** ** > > The UA is probably not able to send your local IP as its internal address > so the contact address is wrong.**** > > ** ** > > Try 3cx!**** > > On Thu, Dec 29, 2011 at 10:21 AM, Pete Burgess <[email protected]> wrote: > **** > > Hi folks**** > > **** > > I’ve been doing some testing with a Sip client on an iPhone and I’m having > problems. Essentially, I have port 5061 open to the internet and I can make > internal calls just fine, i.e. I hook my iPhone up to my wireless internet > at home, connect to the public IP of the SipX server, dial an extension > number and it’s all good.**** > > **** > > Dialling out to an external number, i.e. 1xxx xxx xxxx results in a failed > call. Looking at the logs, this is because of the way the call is routed… > SipX sends the call to an Audiocodes Mediant 800 on a private IP address. > The SIP header shows the call being connected from the IP of my iPhone > (public) via SipX (public) to the private IP of the Mediant. Thinking about > it I guess this is expected behavior. Any way around this ?**** > > **** > > Thanks**** > > > Pete**** > > **** > > **** > > ___________________________________________________**** > > Pete Burgess > Integrated Technical Services > 919.674.0044**** > > www.itsco.com**** > > **** > > Advanced Engineering Services**** > > *Aruba Networks, Barracuda, EMC/VMware, Microsoft, Cisco, Linux, Symantec* > **** > > *Data Center, Business Continuity, Software and Systems Design > IT Management Consulting, Enterprise LAN/WAN and***** > > *Carrier Network Services***** > > **** > > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/**** > > > > **** > > ** ** > > -- > ====================== > Tony Graziano, Manager > Telephone: 434.984.8430 > sip: [email protected] > Fax: 434.465.6833 > > Email: [email protected] > > LAN/Telephony/Security and Control Systems Helpdesk: > Telephone: 434.984.8426 > sip: [email protected] > > Helpdesk Customers: http://myhelp.myitdepartment.net > Blog: http://blog.myitdepartment.net > > Linked-In Profile: > http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 > Ask about our Internet Fax services!**** > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > -- ====================== Tony Graziano, Manager Telephone: 434.984.8430 sip: [email protected] Fax: 434.465.6833 Email: [email protected] LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 sip: [email protected] Helpdesk Customers: http://myhelp.myitdepartment.net Blog: http://blog.myitdepartment.net Linked-In Profile: http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 Ask about our Internet Fax services!
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
