Again. You should go a step further and see if the acme can handle forwarding the phone registrations for you and be in a more standard configuration. On Jan 7, 2012 1:13 PM, "S.K.- G" <[email protected]> wrote:
> Unmanaged….. Really, OMG!**** > > I’ve just changed that and it worked everything.. It was configured as a > “SIP trunk” I’ve just placed some successful “forwarded” test calls and > can’t believe the difference as they all worked just fine .. I still need > to go through more tests the first thing when I am in the office on > Monday.. Will let you know.**** > > I do appreciate your input and hints … Thank you so much and many thanks > to Tony, you guys saved my life you are just awesome! **** > > ** ** > > Unmanaged, Unmanaged, Unmanaged, Unmanaged.. The secret word J**** > > ** ** > > Cheers**** > > Saad**** > > ** ** > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Michael Picher > *Sent:* Saturday, January 07, 2012 11:49 AM > *To:* Discussion list for users of sipXecs software > *Subject:* Re: [sipx-users] Call Forwarding ..**** > > ** ** > > And both trunks are terminated on the acme? With each setup as unmanaged > gateways in sipx?**** > > On Jan 7, 2012 11:24 AM, "S.K.- G" <[email protected]> wrote:**** > > Thank you Tony and Michael.. > > We have eliminated the softphone from our testing and we are currently > using > Navigata for incoming DID and ISP telecom for outgoing calls .. Still same > problem.. Please advise?? > The attached Wireshark was captured when 6477247514 called the Sipx DID > 647 > 689 7627 ( ext. 7627 / Polycom IP 550) and gets forwarded after 10 sec to > 416 9515329 .. My cell rang but no audio .. > SIPX 74.112.46.78 > SBC 74.112.46.12 > Incoming DID Navigata > Outgoing trunk: ISP Telecom > > Please advise, Your help is greatly appreciated > > Regards > Saad > > > > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Tony Graziano > Sent: Saturday, January 07, 2012 10:10 AM > To: Discussion list for users of sipXecs software > Subject: Re: [sipx-users] Call Forwarding .. > > This is a very non-traditional deployment. SIPX is hosted and there is > an acme sbc sitting in the same network as sipx. all users are remote > (behind a firewall) though sipx is setup to use the remote sbc via > sipxbridge. The issue they are having is with hairpinned calls via the > acme and the itsp. I've suggested to them that they look at using a > second itsp for the forwarded calls to test whether the itsp supports > it, as some simply do not work. Additionally, I've specified their > softphone is incorrectly configured and should be removed from the > test environment until it is properly configured/registered. > > 4.4(latest) > > On Sat, Jan 7, 2012 at 9:42 AM, Michael Picher <[email protected]> wrote: > > What version of 4.4 are you on (check bottom of GUI and post here)? > > > > On Sat, Jan 7, 2012 at 9:11 AM, S.K.- G <[email protected]> wrote: > >> > >> Dear All, > >> > >> We are experiencing a weird problem with the Trunk to trunk call > >> forwarding feature. > >> > >> The call forwarding is not working when an outside caller gets forwarded > >> to another external number.. the call ends up with a dead air, seems > like > >> the RTP stream is not getting connected properly as the SIP signaling > >> negotiation process is being completed properly and the receiver phone > rings > >> but no audio path when answered. > >> > >> We have tried the resolution xx-9521 but didn't make any differences as > >> the INVITE From ITSP Account was checked .. > >> > >> NAT Traversal, and Server behind NAT are checked in the internet calling > >> form.. SIPX 4.4 on VMWARE server, Polycom IP 650 station, X-lite 4.0 > >> The network diagram: SIPX > SBC> remote Polycom phones(In DMZ) > >> > >> Any helps will be highly appreciated > >> > >> Regards > >> > >> Saad Khankan > >> Toronto- Canada > >> > >> > >> > >> > >> _______________________________________________ > >> sipx-users mailing list > >> [email protected] > >> List Archive: http://list.sipfoundry.org/archive/sipx-users/ > > > > > > > > > > -- > > Michael Picher, Director of Technical Services > > eZuce, Inc. > > > > 300 Brickstone Square > > > > Suite 201 > > > > Andover, MA. 01810 > > > > O.978-296-1005 X2015 > > M.207-956-0262 > > @mpicher <http://twitter.com/mpicher> > > www.ezuce.com > > > > > > ---------------------------------------------------------------------------- > -------------------------------- > > Hope to see you at the sipX CoLab! http://www.sipfoundry.org/sipx-colab > > A gathering for - open source users, eZuce customers & eZuce partners > > Get the inside track on 4.6 and a glimpse at the future of sipXecs! > > > > > > _______________________________________________ > > sipx-users mailing list > > [email protected] > > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > > > > -- > ====================== > Tony Graziano, Manager > Telephone: 434.984.8430 > sip: [email protected] > Fax: 434.465.6833 > > Email: [email protected] > > LAN/Telephony/Security and Control Systems Helpdesk: > Telephone: 434.984.8426 > sip: [email protected] > > Helpdesk Customers: http://myhelp.myitdepartment.net > Blog: http://blog.myitdepartment.net > > Linked-In Profile: > http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 > Ask about our Internet Fax services! > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/**** > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ >
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
