This is a follow up question to a problem I submitted about 2 months ago. Long story short, I reinstalled sipxecs 4.2 and made the sipxecs server the DHCP and DNS servers as well. This solved some of my issues, but not all. I still am unable to transfer incoming calls to any extension. I can dial out from any ext, I can dial ext to ext, I can dial into the system and the Auto Attendant answers, but when I dial an ext I get "Please hold while I transfer your call" but the ext never rings. The CDR says the call was transfered and there is no error reported.
All calls in and out of sipxecs are through a SIP Trunk via Flowroute. I'm using Polycom SoundPoint IP 335 phones. My firewall is a Sonicwall NSA, with SIP Transformations turned off and H.323 turned off, and consistent NAT enabled. RTP ports 30000-31000 UDP, SIP port 5060 UDP & TCP, SIP port 5080 UDP all open and NAT rules set up to send traffic on these ports to the sipxecs server. I have to support remote phones. My external DNS records are through godaddy and the only record for sipxecs is an A record. I've followed the instructions at http://wiki.sipfoundry.org/display/sipXecs/DNS+Concepts+for+sipXecs for setting up A records and have changed the domain name to the fully qualified domain under System-->Domain. I clicked Apply, restarted the services and then rebooted. I also sent new profiles to the phones. This also required me to change the internal DNS zone file to use the fully qualified domain. After doing this I restarted the named service. DNS advisor runs successfully, but the DNS test under Diagnostics-->Configuration Tests returns a warning that SRV records for the unqualified domain can not be found: Starting DNS servers test. DNS testing of name server: voip.datatek-net.com NAPTR Lookup for datatek-net.com domain: No NAPTR records found. SRV Lookup for Target: _sip._udp.datatek-net.com No SRV records found. SRV Lookup for Target: _sip._tcp.datatek-net.com No SRV records found. SRV Lookup for Target: _sips._tcp.datatek-net.com No SRV records found. Why is the test looking for SRV records for datatek-net.com and not voip.datatek-net.com (which exist and which I had to add to make the DNS advisor happy)? There is one record in the internal DNS config that I do not understand: ; SRV record for service SIP TCP rr.voip.datatek-net.com ; priority: 1 weight: 0 port: 5070 server: voip.datatek-net.com ; _sip._tcp.rr.voip.datatek-net.com. IN SRV 1 0 5070 voip.datatek-net.com. Why is port 5070 being used and for what? Thanks for your help... Stiles _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
