You would pass me a contact to report this error to Audio Codes?
Thanks. 2012/3/26 Tony Graziano <[email protected]> > I don't believe that function is actually used in sipxecs (open source) or > ezuce (ezuce) versions of the product. If this is an issue, it probably > needs to be reported to AudioCodes. > > > On Mon, Mar 26, 2012 at 4:18 PM, Yuri Kurkarewicz > <[email protected]>wrote: > >> Tank you Josh.... >> >> The. Ini file does not change in the firmware version 6.4 or 6.2 to make >> the provision in OpenUc? >> >> >> I have another doubt, how i communicate directly with the Audio Codes >> reporting a bug in the firmware with the equipment M1K-D1 firmware version >> 6.00A.054.002, after i enter in web interface, menu (Advanced >> Applications) and select the menu (LDAP Settings) equipment simply performs >> a reset. >> >> Thanks. >> >> >> >> 2012/3/26 Josh Patten <[email protected]> >> >>> I have customers running all of those Audiocodes versions, no major >>> issues that I'm aware of. >>> >>> For Polycom, there is a scenario which does not work on 3.2.6 which used >>> to work on 3.2.4b: If you perform an attended transfer and then complete >>> the transfer while the party you are transferring the call to is in a >>> ringing state, the call will be held at the transferring phone until the >>> other party picks up. It still works properly, its just an annoyance to the >>> end user. Choose your firmware (3.2.4b or 3.2.6) based on that requirement. >>> >>> >>> On Mon, Mar 26, 2012 at 12:34 PM, Yuri Kurkarewicz < >>> [email protected]> wrote: >>> >>>> For Mediant 1000 which the best firmware to use? >>>> >>>> 6.0.x >>>> 6.2.x >>>> 6.4.x >>>> >>>> >>>> Thanks. >>>> >>>> >>>> >>>> >>>> >>>> >>>> 2012/3/26 Tony Graziano <[email protected]> >>>> >>>>> >>>>> >>>>> On Mon, Mar 26, 2012 at 1:14 PM, Yuri Kurkarewicz < >>>>> [email protected]> wrote: >>>>> >>>>>> Polycom and AudioCodes firmware. >>>>>> >>>>>> I checked the wiki that there is no information regarding the >>>>>> firmware versions of phones compatible with Polycom and OpenUc 4.4. >>>>>> >>>>>> (( >>>>>> http://wiki.sipfoundry.org/display/sipXecs/Polycom+Hardware+Compatibility+List >>>>>> )))) >>>>>> Doesn´t show the firmware versions. >>>>>> >>>>> >>>>> >>>>> http://wiki.sipfoundry.org/display/sipXecs/Polycom+Hardware+Compatibility+List >>>>> >>>>> It does. It shows 3.1.3RevC. Most recently I think if the phone is >>>>> compatible, 3.2.6 is the best choice. >>>>> >>>>>> >>>>>> I'd like to know which firmware and Bootrom compatible with the >>>>>> following phones for the correct provisioning : >>>>>> >>>>>> Polycom VVX1500D >>>>>> Polycom 450, 335, 550/560 >>>>>> Polycom 321/331, 320/330 >>>>>> Polycom 501/500 >>>>>> Soundstation IP 5000, 6000, 7000, vvx1500 >>>>>> >>>>>> In the near future, what the firmware compatible com OpenUc 4.6? >>>>>> >>>>>> ----------------------- >>>>>> >>>>>> I have a Mediant 1000 (four FXO, and E1 Trunk MFC/R2), and I'll try >>>>>> to start doing tests, which would be the best firmware for use with >>>>>> OpenUc? >>>>>> >>>>>> 6.0.x >>>>>> 6.2.x >>>>>> 6.4.x >>>>>> >>>>>> What would be the best to use? >>>>>> >>>>>> For Mediant 1000, what the firmware compatible com OpenUc 4.6? >>>>>> >>>>>> Thank you. >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> sipx-users mailing list >>>>>> [email protected] >>>>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >>>>>> >>>>> >>>>> >>>>> >>>>> -- >>>>> ~~~~~~~~~~~~~~~~~~ >>>>> Tony Graziano, Manager >>>>> Telephone: 434.984.8430 >>>>> sip: [email protected] >>>>> Fax: 434.465.6833 >>>>> ~~~~~~~~~~~~~~~~~~ >>>>> Linked-In Profile: >>>>> http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 >>>>> Ask about our Internet Fax services! >>>>> ~~~~~~~~~~~~~~~~~~ >>>>> >>>>> LAN/Telephony/Security and Control Systems Helpdesk: >>>>> Telephone: 434.984.8426 >>>>> sip: >>>>> [email protected].**net<[email protected]> >>>>> >>>>> Helpdesk Customers: >>>>> http://myhelp.myitdepartment.**net<http://myhelp.myitdepartment.net> >>>>> Blog: http://blog.myitdepartment.net >>>>> >>>>> _______________________________________________ >>>>> sipx-users mailing list >>>>> [email protected] >>>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >>>>> >>>> >>>> >>>> _______________________________________________ >>>> sipx-users mailing list >>>> [email protected] >>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >>>> >>> >>> >>> >>> -- >>> Josh Patten >>> eZuce >>> Solutions Architect >>> O.978-296-1005 X2050 >>> M.979-574-5699 >>> http://www.ezuce.com >>> >>> >>> _______________________________________________ >>> sipx-users mailing list >>> [email protected] >>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >>> >> >> >> _______________________________________________ >> sipx-users mailing list >> [email protected] >> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >> > > > > -- > ~~~~~~~~~~~~~~~~~~ > Tony Graziano, Manager > Telephone: 434.984.8430 > sip: [email protected] > Fax: 434.465.6833 > ~~~~~~~~~~~~~~~~~~ > Linked-In Profile: > http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 > Ask about our Internet Fax services! > ~~~~~~~~~~~~~~~~~~ > > LAN/Telephony/Security and Control Systems Helpdesk: > Telephone: 434.984.8426 > sip: [email protected].**net<[email protected]> > > Helpdesk Customers: > http://myhelp.myitdepartment.**net<http://myhelp.myitdepartment.net> > Blog: http://blog.myitdepartment.net > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ >
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
