UCS 4.x would be preferred for me for a few of the new features: support for the Polycom VVX500; support for configuration by username, instead of device MAC (Polycom's Hot Desking Feature); flexible key placement (no longer must keys be in a specific order defined by Polycom – lines, BLFs, Speed Dial, Blanks). Of course, some of those features would require a bit of extra support from sipXecs as well.
R/ Robert From: Todd Hodgen <[email protected]<mailto:[email protected]>> Reply-To: Discussion list for users of sipXecs software <[email protected]<mailto:[email protected]>> Date: Wednesday, April 25, 2012 9:52 AM To: 'Discussion list for users of sipXecs software' <[email protected]<mailto:[email protected]>> Subject: Re: [sipx-users] SipXecs support for Polycom UCS firmware Just curious – “the newer firmware would be preferred” if that is for a specific reason, or just prefer to use the newest firmware? There are some nice features with 3.3.x and above, however, I believe the firmware prior to that is stable, and useable today. Updating the plugins for 3.3.x and above isn’t a trivial matter and will take some planning and time. From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Michael Picher Sent: Wednesday, April 25, 2012 5:25 AM To: Discussion list for users of sipXecs software Subject: Re: [sipx-users] SipXecs support for Polycom UCS firmware Yes it will. We will probably just skip 3.3.x altogether at this point and go right to 4.0.x. This is of course my $0.02 and will most likely be the case unless somebody in the community builds something for 3.3.x. At this point I don't know why you'd bother worrying about it. So, 3.2.6 today though... This is all probably a couple months away at the soonest. Mike On Wed, Apr 25, 2012 at 4:38 AM, Sebastian Johansson <[email protected]<mailto:[email protected]>> wrote: Hello! I'm facing a decision of whether to use 3.2.x or 4.0.x-firmware on Polycom phones. For us, the newer firmware would be preferred, but as of today, SipXecs can't manage the configuration files used by 3.3.x and 4.0.x-firmware. I wonder if SipXecs will support the newer Polycom Firmwares, 3.3.x and 4.0.x? If so, in which version will the support be implemented? Otherwise I suppose that manual configuration of each phone will be a solution. I found some old discussions on the subject, but without any clear answer, so I simply ask again. Thanks Sebastian _______________________________________________ sipx-users mailing list [email protected]<mailto:[email protected]> List Archive: http://list.sipfoundry.org/archive/sipx-users/ -- Michael Picher, Director of Technical Services eZuce, Inc. 300 Brickstone Square Suite 201 Andover, MA. 01810 O.978-296-1005 X2015 M.207-956-0262 @mpicher <http://twitter.com/mpicher> www.ezuce.com<http://www.ezuce.com> ------------------------------------------------------------------------------------------------------------ There are 10 kinds of people in the world, those who understand binary and those who don't.
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
