You have no statements (or conflicting statements) regarding callerid. Why is it remmed out and also set to ring number two? Connect a analog phone and determine if callerid is sent.
On May 5, 2012 8:31 PM, "Bryan Anderson" <[email protected]> wrote: > ---------- Forwarded message ---------- > From: "Bryan Anderson" <[email protected]> > Date: May 5, 2012 3:37 PM > Subject: Re: [sipx-users] Patton Config from wiki > To: "Discussion list for users of sipXecs software" < > [email protected]> > > Ok, so I have the latest 6.1 on. I have attached my configuration. Out > going is working but not incoming. The gateway is not answering the calls. > > > -Bryan Anderson > > > > > On Sat, May 5, 2012 at 4:23 AM, Tony Graziano < > [email protected]> wrote: > >> You should put the latest version 6.1 on it. >> On May 5, 2012 1:31 AM, "Bryan Anderson" <[email protected]> wrote: >> >>> R5.2 >>> >>> I had gotten it to where some times it would call out. Now I dial the >>> number, get a dial tone, then silence, then dial tone, then busy tone. >>> >>> -Bryan Anderson >>> >>> >>> >>> >>> On Fri, May 4, 2012 at 7:05 PM, Tony Graziano < >>> [email protected]> wrote: >>> >>>> What firmware version? >>>> On May 4, 2012 5:50 PM, "Bryan Anderson" <[email protected]> wrote: >>>> >>>>> I have just received our two new Patton SN5420 4 FXO gateways. I >>>>> pulled down the tested config from here: >>>>> http://wiki.sipfoundry.org/display/sipXecs/Patton+4524+-+TESTED >>>>> >>>>> set the variables mentioned at the top of the page and removed the two >>>>> FXS port listing at the bottom of the config. Now I am getting boot >>>>> errors >>>>> on reading the following four lines of the config. Please advise. >>>>> >>>>> context cs switch >>>>> >>>>> profile ringing-cadence default >>>>> play 1 1000 >>>>> pause 2 4000 >>>>> >>>>> >>>>> >>>>> -Bryan Anderson >>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> sipx-users mailing list >>>>> [email protected] >>>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >>>>> >>>> >>>> LAN/Telephony/Security and Control Systems Helpdesk: >>>> Telephone: 434.984.8426 >>>> sip: [email protected].**net<[email protected]> >>>> >>>> Helpdesk Customers: >>>> http://myhelp.myitdepartment.**net<http://myhelp.myitdepartment.net> >>>> Blog: http://blog.myitdepartment.net >>>> >>>> _______________________________________________ >>>> sipx-users mailing list >>>> [email protected] >>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >>>> >>> >>> >>> _______________________________________________ >>> sipx-users mailing list >>> [email protected] >>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >>> >> >> LAN/Telephony/Security and Control Systems Helpdesk: >> Telephone: 434.984.8426 >> sip: [email protected].**net<[email protected]> >> >> Helpdesk Customers: >> http://myhelp.myitdepartment.**net<http://myhelp.myitdepartment.net> >> Blog: http://blog.myitdepartment.net >> >> _______________________________________________ >> sipx-users mailing list >> [email protected] >> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >> > > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > -- LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 sip: [email protected] Helpdesk Customers: http://myhelp.myitdepartment.net Blog: http://blog.myitdepartment.net
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
