I'll re-install and start from fresh, and compare. I did notice in the
config file the sntp section reads:
<SNTP
tcpIpApp.sntp.resyncPeriod="86400"
tcpIpApp.sntp.address="0.pool.ntp.org"
this is at the end of <MAC>-sipx-sip.cfg nothing after no close out or
anything.
Thanks,
-Bryan Anderson
On Wed, Jul 25, 2012 at 2:53 PM, Tony Graziano <[email protected]
> wrote:
> I also wonder if the poly com and NTP issues were a byproduct of the
> restore. I wouldn't put much effort into that if it does not happen on
> fresh non-restored system.
> On Jul 25, 2012 5:51 PM, "Tony Graziano" <[email protected]>
> wrote:
>
>> The restore was not compatible. I am not sure how they plan to overcome
>> that but this has not been something I would think is implicitly supported
>> get. You would be better off not doing that. Instead export the 4.4 system
>> and remove superadmin and randomize the passwords (remove the password with
>> the sip domain in the export file) and make new passwords and import.
>> That's what I would do and have ALWAYS done unless it is the same version
>> to same version and same everything else.
>>
>> Standby to see what is developed for the backup from 4.4 and restore to
>> 4.6, I just have the indication it is done or fully tested yet.
>> On Jul 25, 2012 5:40 PM, "Bryan Anderson" <[email protected]> wrote:
>>
>>> The backup was from 4.4.
>>>
>>> I have the SNTP sever set to the default under System > Date and Time.
>>>
>>> I just went to devices > phones and clicked on the phone then went to
>>> the "SNTP" Link. The url was:
>>>
>>> https://sipx.domain.net/sipxconfig/phone/EditPhone,$phone$PhoneNavigation.$setting$SettingsNavigation.settingsLink.sdirect?sp=1&sp=StcpIpApp.sntp&state:phone/EditPhone=BrO0ABXcnAAAAAQEADiRjb21tb24kQm9yZGVyABBpbml0aWFsU2Vzc2lvbklkdAANNXE2OXJyOWg4ZHZudg%3D%3D
>>>
>>>
>>> I received an error "An internal error has occurred. Click here to
>>> continue." All red text nothing else on the screen.
>>>
>>>
>>> I will check the jira for a polycom issue.
>>>
>>> -Bryan Anderson
>>>
>>>
>>>
>>> On Wed, Jul 25, 2012 at 2:29 PM, Tony Graziano <
>>> [email protected]> wrote:
>>>
>>>> No real services are enabled by default. That's "normal".
>>>>
>>>> When you restored from backup did you restart the server? If the backup
>>>> was from a prior version also it may not work due to the way passwords were
>>>> stored and encrypted with the domain.
>>>>
>>>> You might check the jira for the poly com issue and open a case for
>>>> that.
>>>>
>>>> If it isn't picking up NTP where is the NTP? Is it enabled?
>>>>
>>>> Homer is being worked on.
>>>> On Jul 25, 2012 5:21 PM, "Bryan Anderson" <[email protected]> wrote:
>>>>
>>>>> I installed SipXecs 4.6.0 yesterday and have updated it using yum.
>>>>> Currently I am running 4.6.0. 2012-07-25EDT11:07:42
>>>>> ip-10-72-43-110.ec2.internal.
>>>>>
>>>>> The wiki says to send the experiences so here are mine so far:
>>>>>
>>>>> When I first installed next to nothing was enabled for services. I
>>>>> guess that is to be expected?
>>>>>
>>>>> When I restored from a backup I lost access to the superadmin account
>>>>> and had to clear the password in the database to get back in.
>>>>>
>>>>> I receive a failed job when generating phone profiles:
>>>>> Projection for: 0004f22a38de
>>>>> 7/25/12 2:04 PM 7/25/12 2:04 PM Failed Invocation of method
>>>>> 'getValue' in class
>>>>> org.sipfoundry.sipxconfig.setting.ConditionalSettingImpl threw exception
>>>>> org.springframework.dao.IncorrectResultSizeDataAccessException: Incorrect
>>>>> result size: expected 1, actual 2 @
>>>>> polycom/mac-address.d/sip.cfg.vm[413,56]
>>>>>
>>>>> My phone will boot and register with the system no problem, but isn't
>>>>> picking up the NTP server. I can get to IVR and make and receive call no
>>>>> problem.
>>>>>
>>>>> I have seen that it's stated homer is having issues. I can get to the
>>>>> web interface and login without fault. The interface look easy to use,
>>>>> but
>>>>> I am not capturing any data into the MySQL database. I looked at my logs
>>>>> and have seen the same error over and over
>>>>>
>>>>> "2012-07-25T21:17:02.562422Z":18352:NET:NOTICE:sipx.domain.net:task-140671845394176:7ff0b75fe700:sipxhomer:"StateQueueClient::signin
>>>>> Type=watcher SIGNIN"
>>>>> "2012-07-25T21:17:02.563328Z":18353:NET:ERR:sipx.domain.net:task-140671845394176:7ff0b75fe700:sipxhomer:"StateQueueClient::eventLoop
>>>>> Is unable to SIGN IN to SQA service"
>>>>>
>>>>> I hope some of this may be helpful.
>>>>>
>>>>> Aside from that I am enjoying what I am seeing so far and look forward
>>>>> to the final release.
>>>>>
>>>>>
>>>>> -Bryan Anderson
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> sipx-users mailing list
>>>>> [email protected]
>>>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/
>>>>>
>>>>
>>>> LAN/Telephony/Security and Control Systems Helpdesk:
>>>> Telephone: 434.984.8426
>>>> sip: [email protected].**net<[email protected]>
>>>>
>>>> Helpdesk Customers:
>>>> http://myhelp.myitdepartment.**net<http://myhelp.myitdepartment.net>
>>>> Blog: http://blog.myitdepartment.net
>>>>
>>>> _______________________________________________
>>>> sipx-users mailing list
>>>> [email protected]
>>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/
>>>>
>>>
>>>
>>> _______________________________________________
>>> sipx-users mailing list
>>> [email protected]
>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/
>>>
>>
> LAN/Telephony/Security and Control Systems Helpdesk:
> Telephone: 434.984.8426
> sip: [email protected].**net<[email protected]>
>
> Helpdesk Customers:
> http://myhelp.myitdepartment.**net<http://myhelp.myitdepartment.net>
> Blog: http://blog.myitdepartment.net
>
> _______________________________________________
> sipx-users mailing list
> [email protected]
> List Archive: http://list.sipfoundry.org/archive/sipx-users/
>
_______________________________________________
sipx-users mailing list
[email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users/
