I'm not sure how well that translates in 4.4 and also 4.6 (branches). A couple of things you can do: dial only 10 digits at the phone. Let the trunk take care of adding anything one provider requires beyond that. You can also have only one gateway per rule but ceate duplicate rules for testing and adding a prefix when dialing at the phone to use the test gateway and stripping it before sending it to the provider. Once you are sure the provider is accepting the call and things work, you should then try to see how branches work.
Note: Trunking requires the provider to send a cause code back that allows sipx to use the "other" gateway. Very few, if any providers do this. It's more likely found on SBC's and gateway devices though. Until ITSP's start using "486: Busy here" in an instance where the call paths are reached or not allowed (like on international) it's really going to be hit or miss that this type of behavior becomes (try this ITSP, if they can't do it or its down, use another). I think I had another thread on multiple ITSP's and things we could look at doing when the trunk is registered but not authenticated, but it wasn't received to well at the time. On Thu, Sep 13, 2012 at 3:44 PM, Ly Tran <[email protected]> wrote: > > Just got a test trunk to add to SipX, as a secondary gateway, but running into some problems. I’m able to receive phone calls to the new DID from the second ITSP, but making outbound does not go through it. It is going out through the primary. Trying to follow this setup here: > > http://www.sipfoundry.org/web/mpicher/~/426137/blogs/-/asset_publisher/xfZRF9U0rLa7/blog/id/128906 > > > > However, I cannot add a new gateway with new branch/DID to the dialplan that was configured for the first ITSP. The first ITSP uses e.164 while the new ITSP does not. Created new dialplans for the second ITSP, but still doesn’t work. Am I overlooking something? > > > > Ly Tran > > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ -- ~~~~~~~~~~~~~~~~~~ Tony Graziano, Manager Telephone: 434.984.8430 sip: [email protected] Fax: 434.465.6833 ~~~~~~~~~~~~~~~~~~ Linked-In Profile: http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 Ask about our Internet Fax services! ~~~~~~~~~~~~~~~~~~ Using or developing for sipXecs from SIPFoundry? Ask me about sipX-CoLab 2013! -- LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 sip: [email protected] Helpdesk Customers: http://myhelp.myitdepartment.net Blog: http://blog.myitdepartment.net
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
