i.e eth1 config file: BOOTPROTO=none NAME="" HOTPLUG=no MACADDR="" HWADDR=00:26:B9:76:B8:FE IPV6INIT=no DEVICE=eth1 NETMASK="" MTU="" BROADCAST="" IPADDR="" NETWORK="" ONBOOT=no
/etc/sysconfig/network-scripts/ifcfg-eth1 on boot=no, it doesn't get turned on by the config. On Tue, Sep 25, 2012 at 1:33 PM, Todd Hodgen <[email protected]> wrote: > If you install with ISO, it will find the one NIC you have attached to the > network, which you will assign an IP to. That is all there is to it. > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Tommy Laino > Sent: Tuesday, September 25, 2012 10:30 AM > To: [email protected] > Subject: Re: [sipx-users] Server with 2 NIC Cards > > > > OK so if I am installing from an ISO how would I go about disabling one of > the NIC cards if the server is being shipped with no OS? I guess maybe I > would have to talk to the manufacturer? Or does it get disabled through > Linux on the SipX? > -- > Tommy Laino > Dome Technologies > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ -- ~~~~~~~~~~~~~~~~~~ Tony Graziano, Manager Telephone: 434.984.8430 sip: [email protected] Fax: 434.465.6833 ~~~~~~~~~~~~~~~~~~ Linked-In Profile: http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 Ask about our Internet Fax services! ~~~~~~~~~~~~~~~~~~ Using or developing for sipXecs from SIPFoundry? Ask me about sipX-CoLab 2013! -- LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 sip: [email protected] Helpdesk Customers: http://myhelp.myitdepartment.net Blog: http://blog.myitdepartment.net _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
