Hi Matt, thanks for the answer. Actually the other box is avaya.My problem is that I would like to have a single "coverage point" (in Avaya wording...) where to forward all calls.
I already have the extensions in both world. The caveat is that - to my knowlegde - there is no way to tell avaya to forward all unanswered calls to the called extension on a different box. But it is easy to put all Avaya extensions in a coverage group that forwards to a single fix extension, that's why I was asking for a solution similar to the one in the link I gave. I'll keep looking on the avaya side though, your suggestion is the best solution if I can forward correctly on the Avaya side... Regards, Gael On 11/09/2012 01:51 PM, [email protected] wrote: > Hi Gael, > > If a sipx extension isn't registered to a phone and receives a call it goes > to the dialed user's voicemail by default. It should be as simple as setting > up the extension in sipx and configuring your Asterisk box to forward after > no answer to the sipx extension. If you need to match up user data between > the two you may be able to leverage the AD or LDAP features. > > HTH, > Matt > ________________________________________ > From: [email protected] > [[email protected]] On Behalf Of Gael Ravot > [[email protected]] > Sent: Friday, November 09, 2012 7:19 AM > To: Discussion list for users of sipXecs software > Subject: [sipx-users] custom voicemail diaplan? > > Hello all, > > I am trying to use sipXecs as a voicemail system for extensions on > another PBX. > > Is there a way to customize the dialplan for voicemail to have a single > number (instead of 8+ext) that can be dialed to leave voicemails and > look into the sip messages to find the destination mailbox? > > The call flow would be something like: > - someone calls A@remotesystem > - no answer > - transfer to VMEXT@sipX via a SIP trunk (the invite here contains a > "History-Info: A@remotesystem", VMEXT is the new voicemail extension I > wish to create) > - let caller leave a message to mailbox of A@sipX > > The first 3 steps are of course configured on the remote system. But how > can I get to the correct mailbox in the end? I guess I have to tell > SipXecs to look for the History-Info of the resulting invite to get to > the correct mailbox (all the extensions exist on both systems). > > It seems like something similar can be done with Asterisk as explained here: > http://voipspot.wordpress.com/2012/03/08/avaya-cm-to-asterisk-voicemail-without-sip-enablement-server-ses-or-session-manager/ > > I haven't found any hints on how to do this with sipXecs , is it > possible? Or maybe there is a complete different way of doing that? > > Thanks in advance for any help/tips! > > Regards, > > Gael > > -- > Gaël Ravot > Ingénieur Réseau & Télécom > +41 21 692 22 67 > UNIL, Centre Informatique, 1015 Lausanne > Switzerland > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > > -- Gaël Ravot Ingénieur Réseau & Télécom +41 21 692 22 67 UNIL, Centre Informatique, 1015 Lausanne Switzerland _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
