all of the polycoms... Yea the paging page in the open source wiki seems to be empty...
This is basically the same sort of limitation as with hunt groups and call forwarding (ring at the same time). Mike On Fri, Nov 30, 2012 at 12:11 PM, Bryan Anderson <[email protected]>wrote: > Thank you for that info. I do not recall reading the 12-13 anywhere but > that doesn't mean I didn't, I do appreciate the info. The server is a > PowerEdge T110 8GB ram Xeon Quad Core 3.3Ghz. If that helps with the > specs. > > > Thanks again with the info. > > Are there any speaker phones that have the auto answer feature? > > Thanks, > > -Bryan Anderson > > > > > On Fri, Nov 30, 2012 at 8:51 AM, Matt White <[email protected]>wrote: > >> Are you trying to page all 83 endpoints at the same time?...or what is >> your largest paging group. >> >> Paging above 20 endpoints is flacky due to the multicast way sipx sends >> pages. Its just not reliable with large groups regardless of the firmware >> version. >> >> We get around this by paging only one phone within an area. When we need >> more coverage we use overhead paging gear/speakers. >> >> -M >> >> >>> Bryan Anderson <[email protected]> 11/30/12 11:41 AM >>> >> >> Hello, >> >> We have an office of ~83 endpoints all but one phone are Polycom >> SoundPoint IP 331's, the receptions uses a 650 with 1 sidecar. >> >> The firmware's are currently as shipped with a mix of firmwares 3.2.4 and >> 3.3.0 (please lets avoid the downgrade if we can, both version are having >> this issue). >> >> Every thing worked fine except paging. Which in this office is a big >> thing. The problem is some pages worked and some didn't. The pages that >> didn't what happened is a large group of the phones would start to receive >> the page with the notification tone, then just stop even though the page >> was still in progress. The phones this occurred on changed with each of >> the pages that failed. I am at a loss for identifying the problem due to >> the inconsistency of the failures. >> >> >> My Questions are: >> >> 1) Has anyone else experience this and been able to resolve it, >> >> 2) Does any one else do a High volume of pages (30-50/day) and have this >> working. If so, what equipment and sipx version are you using? >> >> 3) If it really is the 3.3.0 that's causing my problems, can it be >> downgraded without touching all of the 30 or so phones one by one? >> >> We still have SipXecs in place but are still using the old key system >> tell this is working. >> >> >> Thanks, >> Bryan Anderson >> >> >> >> > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > -- Michael Picher, Director of Technical Services eZuce, Inc. 300 Brickstone Square**** Suite 201**** Andover, MA. 01810 O.978-296-1005 X2015 M.207-956-0262 @mpicher <http://twitter.com/mpicher> linkedin <http://www.linkedin.com/profile/view?id=35504760&trk=tab_pro> www.ezuce.com ------------------------------------------------------------------------------------------------------------ "The best way to predict the future is to invent it." - Alan Kay
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
