Okay, it sounds like I need to give a better description then. I am using for an image server a single processor 900MHz machine I had laying around the lab. SCSI drive of about 18GB in the machine and a 10/100 card for network.
The machine I am pulling the image off of is from one of my beowulf clusters here in my lab. Some of the partitions on the client machine are being nfs mounted,but not by the image server. I have tried the rsh and ssh getclient commends and neither work. I added the --bwlimit=10000 flag to the rsync config, but this doesn't work either that I can tell. It still stalls. Kinda getting frustrated, as my lab is going to be moved soon and I need some insurance that I will be able to get my clusters working after the move in a fairly short period of time. Any suggestions?? David Caldwell [EMAIL PROTECTED] 256.922.1512 ext 4027 >>> "Stroehmann, James" <[EMAIL PROTECTED]> 09/03/03 08:53 AM >>> Not sure if this applies to you, but we had rsync errors when tried to put images on an nfs mounted filesystem. Maybe you have a network problem or your storage is slow. -----Original Message----- From: David Caldwell [mailto:[EMAIL PROTECTED] Sent: Tuesday, September 02, 2003 11:46 AM To: David Caldwell; [EMAIL PROTECTED] Subject: Re: [Sisuite-users] Questions about rsync errors Here are the errors as they come up when rsync times out: Read from remote host 10.30.2.180: Connection reset by peer rsync: connection unexpectedly closed (673636135 bytes read so far) rsync error: error in rsync protocol data stream (code 12) at io.c(150) rsync: connection unexpectedly closed (4168753 bytes read so far) rsync error: error in rsync protocol data stream (code 12) at io.c(150) ------------- daytona IMAGE RETRIEVAL FINISHED ------------- getimage: Failed to retrieve image daytona from 127.0.0.1. I am hoping this will help get a clearer picture and answer as to the problem I am having. Thanks, David Caldwell David Caldwell [EMAIL PROTECTED] 256.922.1512 ext 4027 >>> "David Caldwell" <[EMAIL PROTECTED]> 09/02/03 10:33 AM >>> I am having issues with the getimage command. Rsync times out in the early stages of the image pull, and posts errors of 12 and 20 with a message of connection reset by peer. I originally thought this was because of rsh opening too many sockets and switched over to ssh, but this has not fixed the situation. What am I doing wrong here, and how do I fix it? David Caldwell David Caldwell [EMAIL PROTECTED] 256.922.1512 ext 4027 ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Sisuite-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/sisuite-users ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Sisuite-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/sisuite-users ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Sisuite-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/sisuite-users
