Hi,
Occassionally, I have come across situations where using ext3 has caused problems. The latest incident happened when I was trying to image DELL Poweredge 1750.
Prepareclient and getimage both work, however, when the node has contacted the server and is executing the "master" script, it will bomb out after trying to mount the disk using ext3, irrespective that the filesystem is ext2, saying "No such device", even though it manages to write the inode table to it.
mount /dev/sdx /a -t ext3 -o defaults || shellout
As a workaround, I manually change the ext3 to ext2.
The DELL uses the mptbase/fusion scsi driver for the hd.
Any Ideas or similar experiences?
Thanks for taking the time to read this. Any hints/advice appreciated
Fin Tang
Senior Support Specialist
____________________________
Tel: (01737) 857500
Direct Tel: (01737) 857564
Fax: (01737) 857600
____________________________
CGG
CGG House
1 St. Anne's Boulevard
Redhill
Surrey RH1 1PP.
(Compagnie G�n�rale de G�ophysique)
___________________________________
DISCLAIMER:
This e-mail contains proprietary information some or all of which may be
legally privileged. It is for the intended recipient only. If an addressing
or transmission error has misdirected this e-mail, please notify the author
by replying to this e-mail. If you are not the intended recipient you must
not use, disclose, distribute, copy, print, or rely on this e-mail
