You can try to re-compile the binaries but with a newer
version of parted (1.6.17 seems to work). You need to download the tarball
and put it in the src directory and also modify make.d/parted.rul to reflect the
updated version. Re-compile and it should work.
Alternatively, you can try to use my kernel which I
have already done the above (but there is a possibility my kernel does not work
with your hardware though...)
Cheers,
Bernard
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Simon Lacroix
Sent: Thursday, May 19, 2005 8:20
To: [email protected]
Subject: [Sisuite-users] SATA support in Dell Power Edge 750Hi all,
I know that there was a fair bit of discussion on this but I am not a linux expert and I would need a bit more precision. So was anybody able to run systemimager on a poweredge 750
server using SI 3.2.3 (Intel SATA chipset) ? I rebuilt the kernel using libata kernel patch (I did make install_binaries) and I generated an .iso after that. Booting off that .iso, it seems to see my sata drive and puts it under /dev/sda1 but the master script seems to hang when it runs parted.
Has anyone encountered anything similar ?
Thanks in advance !
Simon
