Hi: Thanks for writing the HOWTO.
Can you please let us know what issues you were encountering with grub? I was able to image RHEL4 on a x86_64 computer with grub as the bootloader. The SystemImager we used should be pretty close to what is in trunk, but possibly with some minor modifications. SystemConfigurator has also been updated. Cheers, Bernard > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf > Of Jon-Pierre Stoermer > Sent: Tuesday, July 19, 2005 14:05 > To: [email protected] > Cc: [EMAIL PROTECTED] > Subject: [Sisuite-users] AMD64 Success w/ HOWTO > > Hello, > > I wanted to post this quick HOWTO outlining the steps I took to get > SystemImager working with AMD64. This document assumes the user has a > good working knowledge of SystemImager, but gives more details of PXE > setup and x86_64 builds. I was able to use the code from SVN:trunk and > I was forced to use LILO as the boot loader on the golden clients. I > was never able to make grub work properly, even after hacking the > /etc/mtab. > > Contact me if you would like a copy of my kernel (w/ SATA, SCSI, e1000 > support), initrd.img, and boel_binaries.tar.gz. > > Disclaimer: This HOWTO is my high level notes and is not a full > installation guide. > It was written to document the install process of our AMD64 cluster. > > Thx, hope someone finds it useful. > > ---- > > SystemImager AMD64 PXE Boot Environment > [EMAIL PROTECTED] > Updated: 07-19-2005 > > 1. - Introduction > > Following this guide the user should be able replicate and reproduce a > working AMD x86_64 PXE boot environment using SystemImager. At the > time of writing stable versions of SystemImager did not support the > x86_64/ia64 environment so we are forced to use the most current > versions of the development code located in the SystemImager > subversion > repository. > > SystemImager SVN access is available at the following URL: > http://svn.sisuite.org/ > > Making SystemImager happy and getting things working properly can be a > challenge, I suggest using the stable release, v3.4.1 for the Server > and Golden Clients. For this installation plan on using the Current > Stable Release v3.4.1 for the server and clients. To build a working > x86_64 PXE environment use a snapshot of the SystemImager SVN trunk > from July, 18th 2005. > > Stable v3.4.1: > http://www.systemimager.org/download/ > > SVN Trunk v3.5.3: > http://IP-REMOVED/files/systemimager/systemimager_svn_trunk_07 > 182005.tgz > > Additionally, at this time we must use LILO as the boot loader on the > Golden Clients. GRUB support is broken and no workaround or patches > available. RHEL 4 doesn't include the LILO rpms in the CD > distribution, > so you can use up2date or download the LILO package from the web. > > LILO-21.4.4-26: (32bit x86_64) > http://IP-REMOVED/files/systemimager/lilo-21.4.4-26.1.i386.rpm > > 1.1 - SystemImager Server Setup (Image Server) > > 1.1.1 - Server Requirements > Server OS: RedHat RHEL 4.0 WS (i386) > SystemImager: v3.4.1 Stable > Syslinux: syslinux-2.11-1 > DHCP: dhcp-3.0.1-12_EL > TFTP: tftp-server-0.39-1 > > Verify the installation of the stable 3.4.1 version of SystemImager, > using the following command: > > # rpm -qa | grep -E "systemimager|systemconfigurator" > systemimager-client-3.4.1-1 > systemimager-common-3.4.1-1 > systemimager-server-3.4.1-1 > systemconfigurator-2.2.2-1 > systemimager-i386boot-standard-3.4.1-1 > > Verify the DHCP, TFTP, and Syslinux configuration: > # chkconfig tftp on > # chkconfig dhcpd on > # service tftp start > # service dhcpd start > # rpm -qa | grep syslinux > syslinux-2.11-1 > > 1.1.1.1 - SystemImager Configuration > > For ease of explanation, this section assumes you already have a > working golden client image on the image server. At least one > golden client image is needed to illustrate how the configuration > files and directories are setup. > > # ls -l /var/lib/systemimager/scripts/ > total 32 > -rw-r--r-- 1 root root 567 Jul 18 22:03 hosts > drwxr-xr-x 2 root root 4096 Jul 14 17:41 post-install > drwxr-xr-x 2 root root 4096 Jul 18 18:08 pre-install > -rw-r--r-- 1 root root 12170 Jul 18 23:35 x86_64_node.master > lrwxrwxrwx 1 root root 18 Jul 18 22:03 y01.sh -> > x86_64_node.master > lrwxrwxrwx 1 root root 18 Jul 18 22:03 y02.sh -> > x86_64_node.master > lrwxrwxrwx 1 root root 18 Jul 18 22:03 y03.sh -> > x86_64_node.master > lrwxrwxrwx 1 root root 18 Jul 18 22:03 y04.sh -> > x86_64_node.master > lrwxrwxrwx 1 root root 18 Jul 18 22:03 y05.sh -> > x86_64_node.master > lrwxrwxrwx 1 root root 18 Jul 18 22:03 y06.sh -> > x86_64_node.master > lrwxrwxrwx 1 root root 18 Jul 18 22:03 y07.sh -> > x86_64_node.master > lrwxrwxrwx 1 root root 18 Jul 18 22:03 y08.sh -> > x86_64_node.master > lrwxrwxrwx 1 root root 18 Jul 18 22:03 y09.sh -> > x86_64_node.master > lrwxrwxrwx 1 root root 18 Jul 18 22:03 y10.sh -> > x86_64_node.master > > Located in /var/lib/systemimager/scripts/ are the master build > scripts for each golden client image, the above example shows > that ten nodes are configured using the same master build script > for each node. The .master build script configures the golden > client disks, image, boot loader, and network information. > This .master script is generated by SystemImager when a golden > client image is pulled to the image server. > > # ls -l /usr/share/systemimager/boot/x86_64/standard/ > total 8140 > -rw-r--r-- 1 root root 5054650 Jul 18 15:36 boel_binaries.tar.gz > -rw-r--r-- 1 root root 23978 Jul 18 15:36 config > -rw-r--r-- 1 root root 1316474 Jul 18 15:36 initrd.img > drwxr-xr-x 15 root root 4096 Jul 18 15:36 initrd_template > -rw-r--r-- 1 root root 1900823 Jul 18 15:36 kernel > > Located in /usr/share/systemimager/boot/x86_64/standard/ are the > boot kernel, initrd.img and boel_binaries. This directory is > critical to the SystemImager PXE autoinstall environment because > it contains the AMD64 kernel, SystemImager initrd.img and the > boel_binaries.tar.gz file, these files are loaded over rsync once > the autoinstall client has successfully PXE booted. The > boel_binaries.tar.gz is the embedded Linux OS needed to finish the > autoinstall client build. You must build the x86_64/standard/ > directory, kernel, initrd.img and boel_binaries.tar.gz on a AMD64 > x86 machine, you cannot boot a 32bit kernel and install a > 64bit OS. > Please see section 1.3 for details on building this boot > environment. > > 1.1.1.2 - DHCP Configuration > > Below is the /etc/dhcpd.conf on the image server, this DHCP will > give out IPs only if there is a matching MAC address in the host > group. > > # general options > authoritative; > ddns-update-style none; > > option option-140 code 140 = text; > option option-141 code 141 = unsigned integer 32; > option option-142 code 142 = string; > option option-143 code 143 = string; > option option-144 code 144 = string; > > option option-140 "192.168.100.26"; > #option option-142 "http://IP-REMOVED/systemimager/boot/";; > #option option-143 "9000"; > option option-144 "n"; > > next-server 192.168.100.26; > #option log-servers 1.2.3.4; > #option option-141 514; > default-lease-time -1; > > filename "pxelinux.bin"; # i386 > #filename "elilo.efi"; # ia64 > > subnet 192.168.100.0 netmask 255.255.255.0 { > range 192.168.100.150 192.168.100.159; > option domain-name "YOURDOMAIN"; > option domain-name-servers NAMESERVER1, NAMESERVER2; > option routers 192.168.100.1; > deny unknown-clients; > > group { > option option-140 "192.168.100.26"; > next-server 192.168.100.26; > filename "pxelinux.bin"; > > host csraid { > hardware ethernet 00:00:93:9d:41:00; > fixed-address 192.168.100.30; } > > host y01 { > hardware ethernet 00:11:25:00:17:0a; > fixed-address 192.168.100.150; } > > host y02 { > hardware ethernet 00:11:00:00:0e:5a; > fixed-address 192.168.100.151; } > } > } > > > Make sure DHCP is started and configured to start on boot. > > 1.1.1.3 - TFTP Configuration > > The TFTP server uses Syslinux as the first stage PXE boot loader. > Below is the structure of the /tftpboot directory on the image > server. The kernel and initrd.img are copied from the AMD64 build > machine into the /tftpboot/ and > /usr/share/systemimager/boot/x86_64/standard/ directories on the > image server. Anytime you make modifications to the kernel > (add modules, drivers, etc) you must rebuild the kernel, > initrd.img > and boel_binaries on the AMD64 build server and copy the new > binaries back over to the image/boot server. > > # ls -l /tftpboot/ > total 3184 > -rw-r--r-- 1 root root 1316474 Jul 18 15:37 initrd.img > -rw-r--r-- 1 root root 1900823 Jul 18 15:37 kernel > -rwxr-xr-x 1 root root 475 Jul 15 23:38 message.txt > -rw-r--r-- 1 root root 12968 Jul 14 21:25 pxelinux.bin > drwxr-xr-x 2 root root 4096 Jul 15 14:48 pxelinux.cfg > > Follow the steps outlined below to build your /tftpboot/ directory on > the image server > > # mkdir /tftpboot/ > # cp -p /usr/share/systemimager/boot/x86_64/standard/initrd.img > /tftpboot/ > # cp -p /usr/share/systemimager/book/x86_64/standard/kernel /tftpboot/ > # cp -p /usr/lib/syslinux/pxelinux.0 /tftpboot/pxelinux.bin > # cp -rp /etc/systemimager/pxelinux.cfg /tftpboot/ > # cp -p /etc/systemimager/pxelinux.cfg/message.txt /tftpboot/ > > Replace the file /tftpboot/pxelinux.cfg/default with the following: > > default systemimager > label systemimager > kernel kernel > append vga=extended initrd=initrd.img root=/dev/ram > DISPLAY message.txt > PROMPT 1 > TIMEOUT 35996 > > Make sure TFTP is started and configured to start on boot. > > 1.2 - SystemImager Client Setup (Golden Client) > > 1.2.1 - Client Requirements > Server OS: RedHat RHEL 4.0 WS (AMD64) > SystemImager: v3.4.1 Stable > LILO: lilo-21.4.4-26 > > Verify the installation of the stable 3.4.1 version of SystemImager, > using the following command: > > # rpm -qa | grep -E "systemimager|systemconfigurator" > systemimager-common-3.4.1-1 > systemconfigurator-2.2.2-1 > systemimager-client-3.4.1-1 > > 1.2.1.1 - Golden Client Configuration > > Next you must install LILO as the golden client boot loader, > currently there is a bug in GRUB during the autoinstall of the > client. The process to convert from GRUB to LILO is simple, > execute the following commands to install LILO and remove grub: > > # rpm -ivh lilo-21.4.4-26.1.i386.rpm > > # cp /etc/lilo.conf.anaconda /etc/lilo.conf > > # /sbin/lilo > Added linux * > Added linux-up > > At this point you have LILO installed as the boot loader, you > can safely remove the GRUB rpm. Issue the following command: > > # rpm -e grub > > Now you can proceed normally and use si_prepareclient to compile > the image and upload to the image server. > > 1.3 - x86_64 Build Environment Setup (Build Server) > > This section outlines how to pull the most current version of > SystemImager from the subversion repository, it also walks the > users through the steps to build a custom boot kernel, initrd.img > and boel_binaries from the distribution. For example, if you need > to add HBA drivers to your AMD64 boot environment you would need > to rebuild the SystemImager binaries and copy them over to your > boot server. > > 1.3.1 - Requirements > Server OS: RedHat RHEL 4.0 WS (AMD64) > SystemImager: v3.5.2 from SVN trunk > > 1.3.1.1 - Obtain SystemImager from SVN > > Check out the current code from the SystemImager Subversion > repository or use the tar ball described in the beginning of this > document. > > # svn co svn://svn.sisuite.org/svn/systemimager/trunk > > 1.3.1.2 - Build kernel, initrd.img, boel_binaries.tar.gz > > Once you have the source code on the build server (x86_64) follow > the steps below to build and install the custom SystemImager boot > environment. > > ~/trunk/ # ./configure > > ~/trunk/ # make binaries > > ~/trunk/ # make install_binaries > > Assuming the build was successful, the last command will install > the newly build kernel, initrd.img and boel_binaries.tar.gz in > /usr/share/systemimager/boot/x86_64/standard/ on the build server. > These 3 files must be copied over to the boot server and installed > in /usr/share/systemimager/boot/x86_64/standard/. > > The kernel and initrd.img must also be copied to the boot > server's /tftpboot/ directory. > > 1.3.1.3 - Install kernel, initrd.img, boel_binaries.tar.gz > > The last step in building the boot environment is to copy > the newly > built SystemImager boot binaries to your boot server. > > [EMAIL PROTECTED] # scp -r > [EMAIL PROTECTED]:/usr/share/systemimager/boot/x86_64/standard/* > /usr/share/systemimager/boot/x86_64/standard/ > > [EMAIL PROTECTED] # scp -r > [EMAIL PROTECTED]:/usr/share/systemimager/boot/x86_64/standard/kernel > /tftpboot/ > > [EMAIL PROTECTED] # scp -r > [EMAIL PROTECTED]:/usr/share/systemimager/boot/x86_64/standard/ > initrd.img > /tftpboot/ > > PXE Boot your Clients, don't forget to plug in the MAC and > restart DHCP. > > > ------------------------------------------------------- > SF.Net email is sponsored by: Discover Easy Linux Migration Strategies > from IBM. Find simple to follow Roadmaps, straightforward articles, > informative Webcasts and more! Get everything you need to get up to > speed, fast. http://ads.osdn.com/?ad_idt77&alloc_id492&op=ick > _______________________________________________ > Sisuite-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/sisuite-users > ------------------------------------------------------- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_idt77&alloc_id492&op=click _______________________________________________ Sisuite-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/sisuite-users
