Hi Babak:
Try using the UYOK functionality in 3.6.3 - assuming your
imageserver has the same (or similar) hardware as your image nodes, do the
following on the server:
# si_prepareclient --norsyncd
This will generate a working kernel/initrd.img for your
image nodes, it should reside in /etc/systemimager/boot. Now copy these
files to the location where it can be retrieved via tftp and you should be good
to go.
You'll need the systemimager-<arch>initrd_template
RPM for this to work.
Cheers,
Bernard
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Babak Karvandi
Sent: Monday, March 13, 2006 13:57
To: [email protected]
Subject: [Sisuite-users] restore problem on HS20 blade; si 3.6.3I have installed systemimager-3.6.3 on hs20 blade servers. creating images looks OK but when trying to restore, the client machine fails on earlier stages to partition the SCSI drives, it seems that the /dev/sdx are not detected after PXE boot. Any help would be appreciated. Thanks.
Best regards
Babak Karvandi
[EMAIL PROTECTED]
