I would like to update this issue. In addition to the below message, I am also seeing the following:
NO DISK DEVICE FILES WERE FOUND. THIS USUALLY MEANS THE KERNEL DID NOT RECOGNIZE ANY OF THE ATTACHED DISKS.
The kernel boel messages, which preceeded this, may include why.
Reverting to disk configuration specified by image script.
Partitioning /dev/cciss/c0d0…..
Please help!
Thx
_____________________________________________
From: Zubair, Mohammad
Sent: Monday, May 15, 2006 5:47 PM
To: '[email protected]'
Subject: Could not stat device /dev/cciss/c0d0
Hi,
I am running SI 3.7.2 (both client and server). Our server is a DL360G3 and our client is a DL380
The target client is booted from PXE. The connection to the image server is good, scripts are downloaded, but then it fails to complete after enumerating the disks. The following error occurs:
Enumerated disks
cciss/c0d0
DISKS=1
Partitioning /dev/cciss/c0d0 .....
Old partition table for /dev/cciss/c0d0:
Error: Could not stat device /dev/cciss/c0d0 - No such file or directory.
Parted -s -- /dev/cciss/c0d0 mklabel msdos || shellout
Error: Could not stat device /dev/cciss/c0d0 - No such file or directory.
Killling off running processes.
cciss/c0d0 are two 36G disks on a hardware RAID 0 combined into a logical drive.
Thanks in advance.
