Hi,
I've seen some posts on this but haven't found any resolutions. I'm
using systemimager 3.7.5-1 to install both RedHat 4 and 3 on HP DL360
and DL380 hardware. When I initially install these machines with the OS
fdisk looks clean, however, when installing from an image fdisk reports
the following:
#: fdisk -l /dev/cciss/c0d0
Disk /dev/cciss/c0d0: 36.4 GB, 36414750720 bytes
255 heads, 32 sectors/track, 8716 cylinders
Units = cylinders of 8160 * 512 = 4177920 bytes
Device Boot Start End Blocks Id System
/dev/cciss/c0d0p1 * 1 36 146484 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/cciss/c0d0p2 36 2909 11718750 83 Linux
Partition 2 does not end on cylinder boundary.
/dev/cciss/c0d0p3 2909 5781 11718750 83 Linux
Partition 3 does not end on cylinder boundary.
/dev/cciss/c0d0p4 5781 8716 11977295+ f Win95 Ext'd
(LBA)
Partition 4 does not end on cylinder boundary.
/dev/cciss/c0d0p5 5781 6738 3906249+ 83 Linux
/dev/cciss/c0d0p6 6738 7696 3906249+ 83 Linux
/dev/cciss/c0d0p7 7696 8174 1953124+ 82 Linux swap
/dev/cciss/c0d0p8 8174 8210 146484 83 Linux
/dev/cciss/c0d0p9 8210 8716 2065170 83 Linux
I've used systemimager for quite a while and have never seen this issue
before, (I've been away from it for a few months though). Seems to be
something that has come up in the later release(s)?
Any ideas?
Thanks,
-John
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Sisuite-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/sisuite-users
