I have a golden client with 2 SATA (/dev/sda and /dev/sdb) drives
running in a software RAID1 mirror. I am able to do a clone install
without any errors, but, upon reboot, I get a "ALERT /dev/md0 does not
exist. Dropping to a shell!!" that takes me to a busybox shell. From
there, I can see and mount both /dev/sda1 and /dev/sdb1 (all the data is
where it should be), and I can even use mdadm to recreate the RAID
array, but cannot get the machine to boot correctly. Any ideas? Here is
my autoinstallscript.conf:
<config>
<disk dev="/dev/sda" label_type="msdos" unit_of_measurement="MB">
<!--
This disk's output was brought to you by the partition tool
"sfdisk",
and by the numbers 4 and 5 and the letter Q.
-->
<part num="1" size="73516" p_type="primary" p_name="-"
flags="boot,raid" />
<part num="2" size="*" p_type="extended" p_name="-" flags="-"
/>
<part num="5" size="*" p_type="logical" p_name="-" flags="raid"
/>
</disk>
<disk dev="/dev/sdb" label_type="msdos" unit_of_measurement="MB">
<!--
This disk's output was brought to you by the partition tool
"sfdisk",
and by the numbers 4 and 5 and the letter Q.
-->
<part num="1" size="73516" p_type="primary" p_name="-"
flags="boot,raid" />
<part num="2" size="*" p_type="extended" p_name="-" flags="-"
/>
<part num="5" size="*" p_type="logical" p_name="-" flags="raid"
/>
</disk>
<raid name="/dev/md1"
raid_level="raid1"
raid_devices="2"
spare_devices="0"
persistence="yes"
devices="/dev/sda5 /dev/sdb5"
/>
<raid name="/dev/md0"
raid_level="raid1"
raid_devices="2"
spare_devices="0"
persistence="yes"
devices="/dev/sda1 /dev/sdb1"
/>
<fsinfo line="10" comment="# /etc/fstab: static file system
information." />
<fsinfo line="20" comment="#" />
<fsinfo line="30" comment="# <file system> <mount point>
<type> <options> <dump> <p
ass>" />
<fsinfo line="40" real_dev="proc" mp="/proc" fs="proc"
options="defaults" dump="0" pass="0" />
<fsinfo line="50" comment="# /dev/md0" />
<fsinfo line="60" real_dev="/dev/md0"
mount_dev="UUID=19591ea4-eaac-40d3-99eb-6b2f387fc56a" mp="/" fs="ext3"
options="default
s,errors=remount-ro" dump="0" pass="1" />
<fsinfo line="70" comment="# /dev/md1" />
<fsinfo line="80" real_dev="/dev/md1"
mount_dev="UUID=0da411ca-fdae-4752-a3cb-a1122eeceb0b" mp="none"
fs="swap" options="sw"
dump="0" pass="0" />
<fsinfo line="90" real_dev="/dev/scd0" mp="/media/cdrom0"
fs="udf,iso9660" options="user,noauto,exec,utf8" dump="0" pass="0"
format="no" />
<boel devstyle="udev"/>
</config>
Best,
Jeff
------------------------------------------------------------------------------
This SF.net email is sponsored by:
High Quality Requirements in a Collaborative Environment.
Download a free trial of Rational Requirements Composer Now!
http://p.sf.net/sfu/www-ibm-com
_______________________________________________
sisuite-users mailing list
sisuite-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/sisuite-users
