17 NEW error logs
bpftrace-0.23.3-alt2
[94m[ SKIP ][0m probe.kprobe_offset_module_error (unmet
condition: 'lsmod | grep
'^nf_tables'')
[91m[ FAILED ][0m 1 tests, listed below:
[91m[ FAILED ][0m call.debugf
dufs-0.43.0-alt1
running 35 tests
test get_dir_zip::case_1 ... FAILED
2025-08-07T03:51:59Z ERROR - Failed to zip /usr/src/tmp/.tmpGNAi8R, an
upstream reader
returned an error: broken pipe
2025-08-07T03:51:59Z ERROR - Failed to zip /usr/src/tmp/.tmpD6rVwS, an
upstream reader
returned an error: broken pipe
test get_dir_zip::case_5 ... ok
--
---- get_dir_zip::case_1 stdout ----
Error: reqwest::Error { kind: Request, url:
"http://localhost:38251/?zip";, source:
hyper_util::client::legacy::Error(Connect, ConnectError("tcp connect
error", Os { code:
111, kind: ConnectionRefused, message: "Connection refused" })) }
failures:
get_dir_zip::case_1
test result: FAILED. 34 passed; 1 failed; 0 ignored; 0 measured; 0
filtered out;
finished in 0.77s
error: test failed, to rerun pass `--test http`
git-cola-4.13.0-alt1
doctree = pickle.loads(serialised)
UnicodeDecodeError: 'utf-8' codec can't decode byte 0x95 in position
78: invalid start byte
The full traceback has been saved in:
gnome-bluetooth3.0-47.1-alt2
E
ERROR: setUpClass (__main__.Tests)
Traceback (most recent call last):
--
Ran 0 tests in 0.005s
FAILED (errors=1)
Summary of Failures:
gnuplot-1:6.0.3-alt1
make[1]: Leaving directory '/usr/src/RPM/BUILD/gnuplot-6.0.3/docs'
make[1]: Entering directory '/usr/src/RPM/BUILD/gnuplot-6.0.3/docs'
x86_64-alt-linux-gcc -pipe -frecord-gcc-switches -Wall -g -O2
-flto=auto -lcerf -o
doc2tex doc2tex-doc2tex.o doc2tex-termdoc.o -lm -lopenspecfun -lcerf
-lz -lpangocairo-1.0
-lpango-1.0 -lgobject-2.0 -lharfbuzz -lcairo -lglib-2.0
make[1]: Leaving directory '/usr/src/RPM/BUILD/gnuplot-6.0.3/docs'
make[1]: *** Deleting file 'gnuplot.tex'
make[1]: Entering directory '/usr/src/RPM/BUILD/gnuplot-6.0.3/docs'
./doc2tex -figures ./gnuplot.doc gnuplot.tex
make[1]: *** [Makefile:1097: gnuplot.tex] Segmentation fault
make[1]: Leaving directory '/usr/src/RPM/BUILD/gnuplot-6.0.3/docs'
make: *** [Makefile:1100: pdf] Error 2
hnswlib-devel-0.8.0-alt1
File "<string>", line 5, in <module>
ModuleNotFoundError: No module named 'numpy'
Traceback (most recent call last):
--
raise RuntimeError(err_msg) from None
RuntimeError: build_wheel failed
libdatrie-0.2.13-alt1_7
# SKIP: 0
# XFAIL: 0
# FAIL: 0
# XPASS: 0
# ERROR: 0
make[3]: Leaving directory '/usr/src/RPM/BUILD/libdatrie-0.2.13/tests'
--
Processing files: libdatrie-devel-0.2.13-alt1_7
error: File not found by glob:
/usr/src/tmp/libdatrie-buildroot/usr/share/doc/libdatrie-devel/*.png
Executing(%doc): /bin/sh -e /usr/src/tmp/rpm-tmp.31470
libwebrtc-audio-processing-1.3-alt2
[307/308] Linking target
webrtc/modules/audio_coding/libwebrtc-audio-coding-1.so.3
hasher-privd: parent: handle_io: idle time limit (3600 seconds) exceeded
libzmf-0.0.2-alt1
/usr/libexec/rpm-build/install -p -m 644 html/*.png
/usr/src/tmp/libzmf-buildroot/usr/share/doc/libzmf/html/
/usr/bin/install: cannot stat 'html/*.png': No such file or directory
make[3]: *** [Makefile:480: install-data-am] Error 1
mumps-5.3.5-alt3
ld: /usr/src/tmp/cciBxang.ltrans0.ltrans.o: in function
`extractElimTree':
/usr/src/RPM/BUILD/mumps-5.3.5-seq/PORD/lib/gelim.c:1067:(.text+0x86ca):
undefined
reference to `newElimTree'
ld:
/usr/src/RPM/BUILD/mumps-5.3.5-seq/PORD/lib/gelim.c:1121:(.text+0x8841):
undefined
reference to `initFchSilbRoot'
ld:
/usr/src/RPM/BUILD/mumps-5.3.5-seq/PORD/lib/gelim.c:1067:(.text+0x886e):
undefined
reference to `newElimTree'
ld: /usr/src/tmp/cciBxang.ltrans0.ltrans.o: in function
`setupCSSFromFrontSubscripts':
/usr/src/RPM/BUILD/mumps-5.3.5-seq/PORD/lib/symbfac.c:248:(.text+0xa275):
undefined
reference to `firstPostorder'
ld:
/usr/src/RPM/BUILD/mumps-5.3.5-seq/PORD/lib/symbfac.c:248:(.text+0xa2ea):
undefined
reference to `nextPostorder'
ld: /usr/src/tmp/cciBxang.ltrans0.ltrans.o: in function
`newFrontSubscripts':
/usr/src/RPM/BUILD/mumps-5.3.5-seq/PORD/lib/symbfac.c:270:(.text+0xa322):
undefined
reference to `nFactorIndices'
ld: /usr/src/tmp/cciBxang.ltrans0.ltrans.o: in function
`freeFrontSubscripts':
/usr/src/RPM/BUILD/mumps-5.3.5-seq/PORD/lib/symbfac.c:288:(.text+0xa408):
undefined
reference to `freeElimTree'
ld: /usr/src/tmp/cciBxang.ltrans0.ltrans.o: in function
`printFrontSubscripts':
/usr/src/RPM/BUILD/mumps-5.3.5-seq/PORD/lib/symbfac.c:314:(.text+0xa493):
undefined
reference to `firstPostorder'
ld:
/usr/src/RPM/BUILD/mumps-5.3.5-seq/PORD/lib/symbfac.c:314:(.text+0xa559):
undefined
reference to `nextPostorder'
ld: /usr/src/tmp/cciBxang.ltrans0.ltrans.o: in function `initFactorMtx':
/usr/src/RPM/BUILD/mumps-5.3.5-seq/PORD/lib/symbfac.c:547:(.text+0xa817):
undefined
reference to `firstPostorder'
ld:
/usr/src/RPM/BUILD/mumps-5.3.5-seq/PORD/lib/symbfac.c:547:(.text+0xa904):
undefined
reference to `nextPostorder'
ocaml-lsp-1.22.0-alt1
+ detached:
/-----------------------------------------------------------------------
+ | Internal error: Uncaught exception.
+ | ("fd closed unflushed",
python3-module-cattrs-25.1.1-alt1
==================================== ERRORS
====================================
________________ ERROR collecting tests/preconf/test_pyyaml.py
_________________
ImportError while importing test module
'/usr/src/RPM/BUILD/python3-module-cattrs-25.1.1/tests/preconf/test_pyyaml.py'.
--
from yaml import safe_dump, safe_load
E ModuleNotFoundError: No module named 'yaml'
____________________ ERROR collecting tests/test_preconf.py
____________________
ImportError while importing test module
'/usr/src/RPM/BUILD/python3-module-cattrs-25.1.1/tests/test_preconf.py'.
--
from yaml import safe_dump, safe_load
E ModuleNotFoundError: No module named 'yaml'
=========================== short test summary info
============================
ERROR tests/preconf/test_pyyaml.py
ERROR tests/test_preconf.py
!!!!!!!!!!!!!!!!!!! Interrupted: 2 errors during collection
!!!!!!!!!!!!!!!!!!!!
--
INFO : Command's result: FAILURE
INFO : Command's error: Command '['python3', '-m', 'pytest']'
returned non-zero
exit status 2.
python3-module-flexmock-0.12.2-alt1
py3: commands[6]> pytest tests/test_pytest.py
py3: Exception running subprocess [Errno 2] No such file or directory:
'pytest'
py3: exit 2 (0.00 seconds)
/usr/src/RPM/BUILD/python3-module-flexmock-0.12.2> pytest
tests/test_pytest.py
python3-module-pyshark-0.6-alt2
==================================== ERRORS
====================================
________________ ERROR at teardown of test_count_packets[True]
_________________
request = <SubRequest 'simple_xml_and_json_capture' for <Function
test_count_packets[True]>>
--
return await asyncio.wait_for(process.wait(), 1)
except asyncTimeoutError:
self._log.debug(
"Waiting for process to close failed, may have zombie process.")
except ProcessLookupError:
pass
except OSError:
if os.name != "nt":
--
> raise KeyError(f"Packet of index {packet_index} does
not exist in capture")
E KeyError: 'Packet of index 0 does not exist in capture'
.tox/py3/lib/python3/site-packages/pyshark/capture/file_capture.py:75:
KeyError
--
raise RuntimeError('This event loop is already running')
RuntimeError: This event loop is already running
warnings.warn(pytest.PytestUnraisableExceptionWarning(msg))
--
=========================== short test summary info
============================
FAILED ../tests/test_cap_operations.py::test_getting_packet_summary -
KeyErro...
ERROR ../tests/test_basic_parsing.py::test_count_packets[True] -
pyshark.capt...
============= 1 failed, 72 passed, 123 warnings, 1 error in 27.39s
=============
qalculate-5.5.2-alt1
/usr/libexec/rpm-build/install -p -m 644 ./html/doxygen_crawl.html
./html/index.html
././html/*.png ./html/doxygen.css ./html/navtree.css ./html/tabs.css
./html/clipboard.js
./html/dynsections.js ./html/jquery.js ./html/menu.js ./html/menudata.js
'/usr/src/tmp/qalculate-buildroot/usr/share/doc/libqalculate/reference/html'
/usr/bin/install: cannot stat '././html/*.png': No such file or
directory
make[3]: *** [Makefile:404: install-referenceDATA] Error 1
qt5-pim-5.15-alt1
make[4]: *** [Makefile:390: check] Aborted
make[4]: Leaving directory
'/usr/src/RPM/BUILD/qt5-pim-5.15/build/tests/auto/contacts/qcontactmanager'
make[3]: *** [Makefile:976: sub-qcontactmanager-check] Error 2
make[3]: Leaving directory
'/usr/src/RPM/BUILD/qt5-pim-5.15/build/tests/auto/contacts'
make[2]: *** [Makefile:581: sub-contacts-check] Error 2
make[2]: Leaving directory
'/usr/src/RPM/BUILD/qt5-pim-5.15/build/tests/auto'
make[1]: *** [Makefile:369: sub-auto-check] Error 2
make[1]: Leaving directory '/usr/src/RPM/BUILD/qt5-pim-5.15/build/tests'
make: *** [Makefile:438: sub-tests-check] Error 2
make: Leaving directory '/usr/src/RPM/BUILD/qt5-pim-5.15/build'
shfmt-3.10.0-alt1
? mvdan.cc/sh/v3/fileutil [no test files]
--- FAIL: TestRunnerRun (0.13s)
--- FAIL: TestRunnerRun/#989 (0.00s)
interp_test.go:3535: wrong output in "mkdir c; cd c; echo
'#!/bin/sh\necho b' >a;
chmod 0755 a; PATH=; a":
15 error logs REMOVED from the list
blender4.5-4.5.1-alt1
dm-secdel-1.0.11-alt2
dropbear-musl-2025.88-alt1
libscalapack-2.1.0-alt3
opendht-3.4.0-alt1
polars-cli-0.8.0-alt1
process-cpp-3.0.2-alt1
python3-module-anyio-4.9.0-alt1
python3-module-faststream-0.5.48-alt1
python3-module-jupyter_server-2.16.0-alt1
python3-module-pytest-xdist-3.8.0-alt1
python3-module-qtconsole-5.6.1-alt1
python3-module-sanic-25.3.0-alt1
python3-module-scikits.bootstrap-1.1.0-alt6.1
redis-7.2.10-alt1
Total 194 error logs.
_______________________________________________
Sisyphus-cybertalk mailing list
[email protected]
https://lists.altlinux.org/mailman/listinfo/sisyphus-cybertalk
