18 NEW error logs

Cardinal-25.06-alt1
        ld: ../../carla/build/modules/Release/jackbridge.min.a: error adding 
symbols: archive
        has no index; run ranlib to add one
        collect2: error: ld returned 1 exit status
        make[2]: *** [../../dpf/Makefile.plugins.mk:567: ../../bin/Cardinal] 
Error 1
        --
        ld: ../../carla/build/modules/Release/jackbridge.min.a: error adding 
symbols: archive
        has no index; run ranlib to add one
        collect2: error: ld returned 1 exit status
        make[2]: *** [../../dpf/Makefile.plugins.mk:610: 
../../bin/Cardinal.lv2/Cardinal.so]
        Error 1

bpftrace-0.24.1-alt1
        [   SKIP   ] probe.kprobe_offset_module_error (unmet 
condition: 'lsmod | grep
        '^nf_tables'')
        [  FAILED  ] 5 tests, listed below:
        [  FAILED  ] probe.attach_to_bpf_program
        [  TIMEOUT ] array.cast literal to int array

clamav-1.4.3-alt3
        [INFO]: Removed tmp directory:
        /usr/src/RPM/BUILD/clamav-1.4.3/x86_64-alt-linux/unit_tests/TC-nlbg6ft6
        FAIL: test_freshclam_04_http_429 
(freshclam_test.TC.test_freshclam_04_http_429)
        Traceback (most recent call last):
        --
        Ran 11 tests in 16.843s
        FAILED (failures=1, skipped=1)
        3/5 Test #3: clamd ............................   Passed   22.08 sec
        --
        5/5 Test #2: libclamav_rust ...................   Passed   31.95 sec
        80% tests passed, 1 tests failed out of 5
        Total Test time (real) =  31.95 sec
        The following tests FAILED:
        4 - freshclam (Failed)

glog-0.7.1-alt1
        26/26 Test #26: dcheck_off .......................***Not Run (Disabled) 
  0.00 sec
        96% tests passed, 1 tests failed out of 23
        Total Test time (real) =  11.62 sec
        --
        26 - dcheck_off (Disabled)
        The following tests FAILED:
        2 - logging (SIGPIPE)

grex-1.4.5-alt1.1
        running 45 tests
        test matching_regexes_with_case_insensitive_matching_and_verbose_mode 
... FAILED
        test matching_regexes_with_conversion_of_non_whitespace ... ok
        --
        thread 
'matching_regexes_with_case_insensitive_matching_and_verbose_mode' (3071370)
        panicked at tests/property_tests.rs:23:1:
        Test failed: assertion failed: test_cases.iter().all(|test_case|
        compiled_regexp.is_match(test_case)) at tests/property_tests.rs:295.
        minimal failing input: test_cases = {
        --
        matching_regexes_with_case_insensitive_matching_and_verbose_mode
        test result: FAILED. 44 passed; 1 failed; 0 ignored; 0 measured; 0 
filtered out;
        finished in 1.72s
        error: test failed, to rerun pass `--test property_tests`

guile-fibers-1.4.0-alt1
        make  check-TESTS
        hasher-privd: parent: handle_io: idle time limit (3600 seconds) exceeded

guile30-3.0.10-alt1
        # SKIP:  0
        # XFAIL: 0
        # FAIL:  0
        # XPASS: 0
        # ERROR: 0
        make[6]: Leaving directory 
'/usr/src/RPM/BUILD/guile30-3.0.10/test-suite/standalone'
        --
        Running 00-repl-server.test
        ERROR: 00-repl-server.test: repl-server: HTTP inter-protocol attack - 
arguments:
        ((system-error "fport_write" "~A" ("Broken pipe") (32)))
        make[5]: *** [Makefile:2622: tests/00-repl-server.log] Error 1

libgmime3.0-3.2.15-alt2
        done; \
        echo "Results: ${passed} tests passed; ${failed} tests failed."; \
        if [ ${failed} -ne 0 ]; then \
        echo -e "Failed tests: ${failed_tests}"; \
        exit 255; \
        --
        Testing PGP/MIME implementation: passed
        Results: 12 tests passed; 1 tests failed.
        Failed tests:
        test-streams

mairix-0.24-alt1
        parse.y:251:53: error: request for member 'e' in something not a 
structure or union
        251 | expr : NOT expr { $$ = new_not_expr($2); }
        parse.y:252:30: error: request for member 'e' in something not a 
structure or union
        252 |      | expr AND expr { $$ = new_and_expr($1, $3); }
        parse.y:252:36: error: implicit declaration of function 'new_and_expr'
        [-Wimplicit-function-declaration]
        252 |      | expr AND expr { $$ = new_and_expr($1, $3); }
        parse.y:252:59: error: request for member 'e' in something not a 
structure or union
        252 |      | expr AND expr { $$ = new_and_expr($1, $3); }
        parse.y:252:73: error: request for member 'e' in something not a 
structure or union
        252 |      | expr AND expr { $$ = new_and_expr($1, $3); }
        parse.y:253:40: error: request for member 'e' in something not a 
structure or union
        253 |      | expr PIPE /* OR */ expr { $$ = new_or_expr($1, $3); }
        parse.y:253:46: error: implicit declaration of function 'new_or_expr'
        [-Wimplicit-function-declaration]
        253 |      | expr PIPE /* OR */ expr { $$ = new_or_expr($1, $3); }
        parse.y:253:68: error: request for member 'e' in something not a 
structure or union
        253 |      | expr PIPE /* OR */ expr { $$ = new_or_expr($1, $3); }
        parse.y:253:82: error: request for member 'e' in something not a 
structure or union
        253 |      | expr PIPE /* OR */ expr { $$ = new_or_expr($1, $3); }
        parse.y:254:30: error: request for member 'e' in something not a 
structure or union
        254 |      | expr XOR expr { $$ = new_xor_expr($1, $3); }

python3-module-aiohttp-3.13.2-alt1
        SKIPPED [1] tests/test_multipart_helpers.py:99: need more smart parser 
which respects
        quoted text
        SKIPPED [1] tests/test_multipart_helpers.py:446: should raise decoding 
error: %82 is
        invalid for latin1
        SKIPPED [1] tests/test_multipart_helpers.py:455: should raise decoding 
error: %E4 is
        invalid for utf-8
        SKIPPED [1] tests/test_multipart_helpers.py:510: urllib.parse.unquote 
is tolerate to
        standalone % chars
        --
        XFAIL 
tests/test_websocket_parser.py::test_parse_frame_header_new_data_err[pyloop]
        FAILED 
tests/test_web_functional.py::test_keepalive_expires_on_time[pyloop]
        ============ 1 failed, 4166 passed, 25 skipped, 7 xfailed in 56.10s 
============
        INFO     : Command's result: FAILURE
        INFO     : Command's error: Command '['pytest', '-m', 'not dev_mode and 
not
        internal', '-vra', '-o=addopts=', '-n', 'auto', 
'--ignore=tests/autobahn',
        '--ignore=tests/test_proxy_functional.py', 
'--ignore-glob=tests/test_benchmarks_*',
        'tests']' returned non-zero exit status 1.

python3-module-pytest-xdist-3.8.0-alt1
        ) == {"gw0": 10}
        E       AssertionError: assert {'gw1': 10} == {'gw0': 10}
        E
        --
        XFAIL 
testing/test_workermanage.py::test_unserialize_warning_msg[Nested] - Nested
        warning classes are not supported.
        FAILED 
testing/acceptance_test.py::TestLoadScope::test_workqueue_ordered_by_input
        ======= 1 failed, 195 passed, 6 skipped, 10 xfailed in 170.81s 
(0:02:50) =======
        INFO     : Command's result: FAILURE
        INFO     : Command's error: Command '['python3', '-m', 'pytest', 
'-ra']' returned
        non-zero exit status 1.
        error: Bad exit status from /usr/src/tmp/rpm-tmp.90156 (%check)

python3-module-retrying-1.4.2-alt1
        "msg": "calls_per_second_final was not within +/-20% of 
calls_per_second_initial"
        E       AssertionError: False is not true : {'calls_per_second_initial':
        16113.704520594822, 'calls_per_second_final': 22171.889445011402, 'msg':
        'calls_per_second_final was not within +/-20% of 
calls_per_second_initial'}
        test_retrying.py:530: AssertionError
        =========================== short test summary info 
============================
        FAILED test_retrying.py::LoadTest::test_load - AssertionError: False is 
not t...
        ======================== 1 failed, 26 passed in 24.56s 
=========================
        INFO     : Command's result: FAILURE
        INFO     : Command's error: Command '['python3', '-m', 'pytest', 
'test_retrying.py']'
        returned non-zero exit status 1.

python3-module-vcrpy-7.0.0-alt1
        >           self.sock.sendall(data)
        E           BrokenPipeError: [Errno 32] Broken pipe
        /usr/lib64/python3.13/http/client.py:1057: BrokenPipeError
        --
        =========================== short test summary info 
============================
        FAILED 
tests/unit/test_stubs.py::TestVCRConnection::test_body_consumed_once_iterator
        ================= 1 failed, 176 passed, 3 deselected in 1.42s 
==================
        INFO     : Command's result: FAILURE
        INFO     : Command's error: Command '['python3', '-m', 'pytest', '-ra', 
'-m', 'not online',
        'tests/unit/']' returned non-zero exit status 1.
        error: Bad exit status from /usr/src/tmp/rpm-tmp.22575 (%check)

python3-module-zmq-27.1.0-alt1
        >   raise ZMQError(ENOTSOCK)
        E   zmq.error.ZMQError: Socket operation on non-socket
        zmq/backend/cython/_zmq.py:1339: ZMQError
        --
        >   raise ZMQError(ENOTSOCK)
        E   zmq.error.ZMQError: Socket operation on non-socket
        zmq/backend/cython/_zmq.py:1339: ZMQError
        --
        >   raise ZMQError(ENOTSOCK)
        E   zmq.error.ZMQError: Socket operation on non-socket
        zmq/backend/cython/_zmq.py:1339: ZMQError
        --
        raise RuntimeError('Event loop is closed')
        RuntimeError: Event loop is closed
        warnings.warn(
        --
        =========================== short test summary info 
============================
        FAILED tests/test_log.py::TestPubLog::test_blank_root_topic - 
TimeoutError: T...
        FAILED tests/test_log.py::TestPubLog::test_custom_debug_formatter - 
zmq.error...
        FAILED tests/test_log.py::TestPubLog::test_custom_global_formatter - 
zmq.erro...
        FAILED tests/test_log.py::TestPubLog::test_custom_message_type - 
zmq.error.ZM...
        FAILED tests/test_log.py::TestPubLog::test_init_iface - 
zmq.error.ZMQError: S...
        FAILED tests/test_log.py::TestPubLog::test_init_socket - 
zmq.error.ZMQError: ...
        FAILED tests/test_log.py::TestPubLog::test_root_topic - 
zmq.error.ZMQError: S...

qt5-qtsystems-5.4.0_git20230712.81e08ee-alt1
        make[3]: Leaving directory
        
'/usr/src/RPM/BUILD/qt5-qtsystems-5.4.0_git20230712.81e08ee/tests/auto/serviceframework'
        make[2]: *** [Makefile:452: sub-serviceframework-check] Error 2
        make[2]: Leaving directory
        '/usr/src/RPM/BUILD/qt5-qtsystems-5.4.0_git20230712.81e08ee/tests/auto'
        make[1]: *** [Makefile:396: sub-auto-check] Error 2
        make[1]: Leaving directory
        '/usr/src/RPM/BUILD/qt5-qtsystems-5.4.0_git20230712.81e08ee/tests'
        make: *** [Makefile:514: sub-tests-check_ordered] Error 2
        make: Leaving directory 
'/usr/src/RPM/BUILD/qt5-qtsystems-5.4.0_git20230712.81e08ee'
        error: Bad exit status from /usr/src/tmp/rpm-tmp.82198 (%check)
        RPM build errors:
        File 
/usr/src/RPM/SOURCES/qt5-qtsystems-5.4.0_git20230712.81e08ee-alt1.patch is 
smaller
        than 8 bytes

reuse-6.2.0-alt1
        linkcheck   to check all external links for integrity
        doctest     to run all doctests embedded in the documentation (if 
enabled)
        coverage    to run coverage check of the documentation (if enabled)
        clean       to remove everything in the build directory
        make: Leaving directory '/usr/src/RPM/BUILD/reuse-6.2.0/docs'
        + pushd docs
        ~/RPM/BUILD/reuse-6.2.0/docs ~/RPM/BUILD/reuse-6.2.0
        + PBR_VERSION=6.2.0
        + sphinx-build-3.12 -b man . manpages
        /usr/src/tmp/rpm-tmp.23809: line 135: sphinx-build-3.12: command not 
found

tmux-3.5a-alt1
        + rm regress/capture-pane-hyperlink.sh
        + make -C regress
        make: Entering directory '/usr/src/RPM/BUILD/tmux-3.5a/regress'
        sh am-terminal.sh
        sh capture-pane-sgr0.sh
        sh combine-test.sh
        sh command-order.sh
        server exited unexpectedly
        make: *** [Makefile:9: command-order.sh] Error 1
        make: Leaving directory '/usr/src/RPM/BUILD/tmux-3.5a/regress'

valkey-8.1.3-alt1
        254 seconds - integration/replication-psync
        !!! WARNING The following tests failed:
        *** [TIMEOUT]: clients state report follows.

        15 error logs REMOVED from the list
dm-secdel-1.0.12-alt1
fonts-ttf-IosevkaTermCurlySlab-33.3.0-alt1
ispc-1.28.2-alt1
libdqlite-1.18.2-alt1
opendht-3.4.0-alt1
perl-Parallel-Runner-0.014-alt1_3
plank-0.11.89-alt2
pve-qemu-1:10.0.2-alt1
python3-module-easyprocess-1.1-alt2
python3-module-fastapi-0.119.0-alt1
python3-module-haversine-2.9.0-alt1
python3-module-paho-2.1.0-alt1
python3-module-pytest-httpbin-2.1.0-alt1
python3-module-qtconsole-5.7.0-alt1
zstd-1.5.5-alt2

Total 241 error logs.
_______________________________________________
Sisyphus-cybertalk mailing list
[email protected]
https://lists.altlinux.org/mailman/listinfo/sisyphus-cybertalk

Reply via email to