12 NEW error logs

binwalk3-3.1.0-alt1
        test src/extractors/common.rs - 
extractors::common::Chroot::create_symlink (line 574)
        ... ok
        test src/binwalk.rs - binwalk::Binwalk::analyze (line 639) ... FAILED
        failures:
        --
        src/binwalk.rs - binwalk::Binwalk::analyze (line 639)
        test result: FAILED. 28 passed; 1 failed; 3 ignored; 0 measured; 0 
filtered out;
        finished in 0.25s
        error: doctest failed, to rerun pass `--doc`

dm-secdel-1.0.12-alt1
        systemctl daemon-reload
        make: systemctl: No such file or directory
        make: [Makefile:24: install-bin] Error 127 (ignored)
        systemctl enable secdeltab
        make: systemctl: No such file or directory
        make: [Makefile:25: install-bin] Error 127 (ignored)
        --
        make[2]: Entering directory '/usr/src/RPM/BUILD/dm-secdel-1.0.12'
        make[3]: /usr/src/linux-7.0.11-7.0-alt2/scripts/pahole-version.sh: No 
such file or
        directory
        make[2]: Leaving directory '/usr/src/RPM/BUILD/dm-secdel-1.0.12'
        --
        make[2]: Entering directory '/usr/src/RPM/BUILD/dm-secdel-1.0.12'
        make[3]: /usr/src/linux-7.0.11-7.0-alt2/scripts/pahole-version.sh: No 
such file or
        directory
        warning: pahole version differs from the one used to build the kernel

fish-4.7.1-alt1
        tests/pexpects/signals.py                                        
PASSED    5350 ms
        tests/pexpects/fkr.py                                            
FAILED    5678 ms
        Failed to match pattern: prompt 2
        --
        tests/checks/tmux-history-search.fish                            
PASSED    6286 ms
        tests/checks/tmux-history-pager.fish                             
FAILED    6550 ms
        Failure:
        --
        236 / 238 passed (10 skipped)
        Failed tests:
        tests/pexpects/fkr.py
        tests/checks/tmux-history-pager.fish
        FAILED: [code=1] CMakeFiles/fish_run_tests
        /usr/src/RPM/BUILD/fish-4.7.1/x86_64-alt-linux/CMakeFiles/fish_run_tests
        cd /usr/src/RPM/BUILD/fish-4.7.1 && 
/usr/src/RPM/BUILD/fish-4.7.1/tests/test_driver.py
        /usr/src/RPM/BUILD/fish-4.7.1/x86_64-alt-linux && env
        FISH_CMAKE_BINARY_DIR=/usr/src/RPM/BUILD/fish-4.7.1/x86_64-alt-linux
        PREFIX=/usr DOCDIR=/usr/share/doc/fish DATADIR=/usr/share 
SYSCONFDIR=/etc
        BINDIR=/usr/bin 
CARGO_TARGET_DIR=/usr/src/RPM/BUILD/fish-4.7.1/x86_64-alt-linux/cargo
        CARGO_BUILD_RUSTC=/usr/bin/rustc FISH_SPHINX=SPHINX_EXECUTABLE-NOTFOUND 
/usr/bin/cargo
        test --no-default-features --features=localize-messages --workspace 
--target-dir
        
/usr/src/RPM/BUILD/fish-4.7.1/x86_64-alt-linux/cargo/x86_64-unknown-linux-gnu 
--target
        x86_64-unknown-linux-gnu --lib

perl-Parallel-Runner-0.014-alt1_3
        PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" 
"-MTest::Harness" "-e"
        "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 
'blib/arch')" t/*.t
        # Failed test 'First signal sent after delay'
        # at t/Destruction.t line 76.
        --
        t/Destruction.t (Wstat: 256 (exited 1) Tests: 10 Failed: 1)
        Failed test:  7
        Non-zero exit status: 1
        --
        Result: FAIL
        Failed 1/3 test programs. 1/57 subtests failed.
        make: *** [Makefile:776: test_dynamic] Error 255

php8.4-pcntl-8.4.21-alt1
        001- bool(true)
        001+ Fatal error: Uncaught ValueError: pcntl_setns():
        Argument #1 ($process_id) process no longer available (663) in
        
/usr/src/RPM/BUILD/php8.4-pcntl-8.4.21/tests/pcntl_setns_newpid.php:5
        002+ Stack trace:
        --
        Time taken      : 10.416 seconds
        FAILED TEST SUMMARY
        pcntl_setns() [tests/pcntl_setns_newpid.phpt]

python3-module-aioquic-1.3.0-alt1
        INFO     : Running command: ['python3', '-m', 'unittest']
        .........F.[7f19580674b65068] Error: 8, reason: 
original_destination_connection_id does
        not match, frame_type: 6
        .[1928d422c27cede5] Error: 8, reason: retry_source_connection_id does 
not match,
        frame_type: 6
        .....[b03fb06fc4c74890] Error: 298, reason: unable to get local issuer 
certificate,
        frame_type: 6
        ........................................[a2611be764e42fd1] Error: 10, 
reason: Invalid
        max_early_data value 12345, frame_type: 6
        ................[ca0bc001f9693f73] Error: 10, reason: Packet contains 
no CRYPTO frame,
        frame_type: 0
        .[5bbc77886d61e2f6] Error: 365, reason: No QUIC transport parameters 
received,
        frame_type: 6
        
.....................................................................................................[4b4deaac0cb91fdc]
        Error: 326, reason: No supported protocol version, frame_type: 6
        .[d3a914cefaf36c9d] Could not find a common protocol version
        .[e9bbec077db72a4e] Version negotiation packet contains protocol 
version 0x00000001
        (VERSION_1)
        FAIL: test_connect_and_serve_with_packet_loss
        
(tests.test_asyncio.HighLevelTest.test_connect_and_serve_with_packet_loss)
        This test ensures handshake success and stream data is successfully sent
        --
        self.assertEqual(response, data)
        AssertionError: b'ZZZ[34556 chars]ZZZZZ' != b'ZZZ[34556
        chars]ZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ[30927 chars]ZZZZ'
        Ran 470 tests in 121.186s
        FAILED (failures=1)
        INFO     : Command's result: FAILURE

python3-module-oscrypto-1.3.0-alt1.1
        test_dump_certificate 
(tests.test_asymmetric.AsymmetricTests.test_dump_certificate) ... ok
        test_dump_private 
(tests.test_asymmetric.AsymmetricTests.test_dump_private) ... ERROR
        test_dump_private_openssl 
(tests.test_asymmetric.AsymmetricTests.test_dump_private_openssl)
        ... ok
        --
        test_load_order (tests.test_init.InitTests.test_load_order) ... ok
        ERROR: test_dump_private 
(tests.test_asymmetric.AsymmetricTests.test_dump_private)
        Traceback (most recent call last):
        --
        iterations = int(iterations / fraction / 2.0)
        ZeroDivisionError: float division by zero
        Ran 141 tests in 0.297s
        FAILED (errors=1)

python3-module-rapidfuzz-3.14.5-alt1


python3-module-urllib3-2:2.7.0-alt1
        SKIPPED [3] test/with_dummyserver/test_socketlevel.py:2613: urllib3 
uses Content-Length
        in this case
        FAILED
        
test/with_dummyserver/test_socketlevel.py::TestProxyManager::test_tunnel_sets_http_11_alpn
        - AssertionError: assert b'h2' not in
        
b'\x16\x03\x01\x06\x17\x01\x00\x06\x13\x03\x03JS\x82\x8b\x98\'\xb2\x0c\'La\xdd\t9r\x16gy)\xea\xe91#\xb4U\xd6\x88\xa4\x...0\x1d\x00
        
\xc0x)\xc0tx\xc3\x96-hY\x06H\xe1\xa5X\xef\x02Z\x91\x0c\x0cpN@\x87\xcef\x95;\xca5\x00\x1b\x00\x03\x02\x00\x01'
        +  where
        
b'\x16\x03\x01\x06\x17\x01\x00\x06\x13\x03\x03JS\x82\x8b\x98\'\xb2\x0c\'La\xdd\t9r\x16gy)\xea\xe91#\xb4U\xd6\x88\xa4\x...0\x1d\x00
        
\xc0x)\xc0tx\xc3\x96-hY\x06H\xe1\xa5X\xef\x02Z\x91\x0c\x0cpN@\x87\xcef\x95;\xca5\x00\x1b\x00\x03\x02\x00\x01'
        = <test.with_dummyserver.test_socketlevel.TestProxyManager object at 
0x7fd884ed1e00>.buf
        --
        INFO     : Command's result: FAILURE
        INFO     : Command's error: Command '['python3', '-m', 'pytest', 
'-ra']' returned
        non-zero exit status 1.

python3-module-websockets-16.0-alt2
        
.......................................sssssssssssssss.......ssssssss.......................................................................................................................................................................s....s.s.........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................ss...........................................................................................................................................................................................................................................................................................................................................................................................sssssssssssssss.....ssssssss.....................................................................................................................s.s............................................................................E............................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
        ERROR: test_writing_in_recv_events_fails
        
(tests.sync.test_connection.ServerConnectionTests.test_writing_in_recv_events_fails)
        Error when responding to incoming frames is correctly reported.
        --
        raise self.protocol.close_exc from original_exc
        websockets.exceptions.ConnectionClosedError: no close frame received or 
sent
        Ran 1959 tests in 71.768s
        FAILED (errors=1, skipped=53)
        INFO     : Command's result: FAILURE
        INFO     : Command's error: Command '['python3', '-m', 'unittest']' 
returned non-zero
        exit status 1.

python3-module-zmq-27.1.0-alt1
        raise RuntimeError('Event loop is closed')
        RuntimeError: Event loop is closed
        warnings.warn(
        --
        =========================== short test summary info 
============================
        FAILED tests/test_retry_eintr.py::TestEINTRSysCall::test_retry_poll - 
assert ...
        ==== 1 failed, 334 passed, 35 skipped, 2 deselected, 15 warnings in 
31.77s =====
        INFO     : Command's result: FAILURE
        INFO     : Command's error: Command '['python3', '-m', 'pytest', '-k', 
'not test_cython']'
        returned non-zero exit status 1.

qemu-10.2.2-alt1
        584/585 qtest+qtest-x86_64 - qemu:qtest-x86_64/hd-geo-test              
          OK
        9.84s   23 subtests passed
        585/585 qtest+qtest-arm - qemu:qtest-arm/aspeed_smc-test                
          OK
        340.23s   34 subtests passed
        Summary of Failures:
        413/585 qtest+qtest-aarch64 - qemu:qtest-aarch64/test-hmp               
          TIMEOUT
        240.09s   killed by signal 15 SIGTERM
        Ok:                528
        Fail:              0
        Skipped:           56
        Timeout:           1
        Full log written to 
/usr/src/RPM/BUILD/qemu-10.2.2/build-dynamic/meson-logs/testlog.txt
        make: *** [Makefile.mtest:26: do-meson-check] Error 1

        15 error logs REMOVED from the list
bmake-20251111-alt1
fonts-ttf-IosevkaTermCurlySlab-34.4.0-alt1
fpc-3:3.2.3-alt2
git-cola-4.18.2-alt1
libgupnp-igd-1.6.0-alt1
lightdm-1.32.0-alt13
netty-4.1.100-alt1
python3-module-devpi-server-6.20.1-alt1
python3-module-django-6.0.5-alt1
python3-module-httpdbg-2.1.6-alt1
python3-module-mdp-3.6.0.15.g64f14eee-alt6
python3-module-paho-2.1.0-alt1
python3-module-python-lsp-server-1.14.0-alt1
signify-32-alt1
sssd-2.12.0-alt1

Total 529 error logs.
_______________________________________________
Sisyphus-cybertalk mailing list
[email protected]
https://lists.altlinux.org/mailman/listinfo/sisyphus-cybertalk

Reply via email to