Hi! It's impossible to work with Plugin Encodeur 1.2 on my portable computer and intelliscope system on my XT-10! OS: Win 2000 pro; Data on CdC: ""I copy this information given by Gary here: -1. Set up Port Configuration 9600,8,N,1 Timeout 1000 mS Interval Timeout 1000mS -2. Set up encoder configuration Type Intelliscope Steps for Alpha 9216 Steps for Delta 9216 Read Interval 1000 ( other values may work too ) Mount Type Alt-Az Encoder Init Angle 90 -3. Turn on Intelliscope, and press enter atleast once. ( Note 1 : you can go through the alignment proceedure for the Intelliscope or not, the Cdc alignment is independent of the Intelliscope) Note 2: You must press a key on the Intelliscope once in every 15 mins or it will goto sleep, and you will have to reallign! ) -4. Press connect and follow the nomal Cdc vertical and two star alignment.""
Cable configuration: RJ11/RS232. (communication cable/intelliscope it's ok!) I don't understand where is the problem! please help me. St�phane from France. ------------------------ Yahoo! Groups Sponsor --------------------~--> What would our lives be like without music, dance, and theater? Donate or volunteer in the arts today at Network for Good! http://us.click.yahoo.com/TzSHvD/SOnJAA/79vVAA/1.XolB/TM --------------------------------------------------------------------~-> Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/skychart-discussion/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
