Hi Alexandra and list, Here is how to install Skype Watch:
Using SkypeWatch Under JAWS 6.0 and Later SkypeWatch Installation For JAWS 6.0 and Later The below procedure should only be necessary once. No further attention to SkypeWatch will be required after a JAWS repair, unless you have modified the original JAWS defaultddjss for some other reason. A shorter procedure, described in the "SkypeWatch Maintenance For JAWS 6.0 and Later" section of this document, can be used to maintain SkypeWatch after a JAWS update or upgrade. If your are using a JAWS version older than 6.0, skip to the "SkypeWatch Installation For JAWS Versions Older Than 6.0" section for installation instructions. Important: Be sure to follow the below procedure carefully. Failure to follow the procedure correctly can result in an unusable JAWS installation. The point at which this becomes possible will be clearly indicated in the procedure. To install the SkypeWatch system under JAWS 6.0 or later: 1. If you already installed SkypeWatch by adding a line to the original JAWS defaultddjss from Freedom Scientific (this was the procedure before June 2, 2007), reverse this as follows before proceeding: 1. Type JAWSK-EY plus 0 from within any application to open the JAWS Script Manager. 2. Type Ctrl plus Shift plus D to open defaultddjss. 3. Find and remove the line that says use "skypewatchddjsb" Make sure to avoid removing anything besides this line. 4. Type Ctrl plus S to recompile defaultddjss, then Alt plus Fbled to close the Script Manager. SkypeWatch will be unloaded at this point. 2. Open the JAWS user folder by going to the Start menu, then All Programs, then your JAWS version, then Explore JAWS, and then Explore My Settings. Leave this folder open as you go to the next step. We will refer to this folder window as the User folder from now on. 3. Check for a defaultddjss file in the folder just opened. If you find it, and it is small, meaning less than 50 K in size, open it by typing JAWSK-EY plus 0 to open the Script Manager, then Ctrl plus Shift plus D to open the custom defaultddjss file, then skip to step 11. If you find it but it is a big file, meaning over 200 K in size, delete it and continue with the next step. This situation occurs when the JAWS original defaultddjss gets modified but saved in the user folder, which became JAWS' default behavior at some point. If you do not find defaultddjss in the User folder, continue to the next step. 4. Open the JAWS shared folder by going to the Start menu, then All Programs, then your JAWS version, then Explore JAWS, and then Explore Shared Settings. Leave this folder open as you go to the next step. We will refer to this folder window as the Shared folder from now on. 5. Copy defaultddjsb to defaultfsddjsb in the Shared folder just opened. You can do this as follows: 1. Find defaultddjsb in the file list. Be careful that the file you find is defaultddjsb, ending with B as in Bravo, and not defaultddjsaid, ending in D as in Delta. (Default JAWS voices read these very similarly.) 2. Type Ctrl plus C and then Ctrl plus V to copy the file to the clipboard and bring back the copy into the file list. The copy will show up as "Copy of defaultddjsb." 3. Find the copy, usually possible just by pressing the End key to go to the last file in the list. 4. Press F2 to edit the name of the file, then change the name to defaultfsddjsb and press Enter to rename the file. 6. Move the new defaultfsddjsb file from the Shared folder to the User folder. You can do this by typing Ctrl plus X on the file, pressing Alt plus Tab to go to the open User folder window, and typing Ctrl plus V there to paste the file into that folder. 7. Type JAWSK-EY plus 0 to open the JAWS Script Manager, then type Ctrl plus N and then Enter to open a blank screen within the Script Manager. 8. Enter the following code, by typing or pasting from this document as you prefer: Use "defaultfsddjsb" void function filler)) return endFunction The dummy function is necessary to avoid problems compiling defaultddjss under JAWS 7.1 and later. 9. Verify that the code you entered looks exactly as shown above. Failure to enter this code correctly, or failure to create defaultfsddjsb correctly as described earlier, can cause the next step to disable all JAWS keystrokes. If that happens, it will be necessary to find a way to delete defaultddjsb from this User folder before JAWS will work again. 10. Save the new custom defaultddjss file and recompile it. Do this by typing Ctrl plus S and, when prompted, entering the name "defaultddjss" (without the quotes) and pressing Enter. You should hear JAWS say "Compile complete." If you get an error message instead, press the OK button, then go back and check the code and recompile as necessary. If you get a warning like "This file already exists, do you want to replace it?" choose Yes. This will probably happen to several people, because the old SkypeWatch installation procedure can create a copy of defaultddjss in the JAWS user folder. By saying Yes here, you will not be replacing the original JAWS default files. 11. Whether you reached this step from step 10 or from step 3, you should still be in the Script Manager with the custom defaultddjss file loaded. Add this below the Use "defaultfsddjsb" line: Use "skypewatchddjsb" 12. Recompile the defaultddjsb file with the JAWS Script Manager to make the new code immediately take effect. Do this by typing Ctrl plus S. You should hear JAWS say "Compile complete." If you get an error message instead, press the OK button, then go back and check the code and recompile as necessary. 13. Close the JAWS Script Manager, the Shared folder window if open, and the User folder window, each with Alt plus Fbled. SkypeWatch Maintenance For JAWS 6.0 and Later Because SkypeWatch modifies JAWS' default behavior, a small bit of maintenance is required after any change to default JAWS files. This can happen when chinin You update JAWS through the Update option in JAWS 7.1 and later. chinin You upgrade to a new JAWS version. chinin You install or remove something that modifies defaultddjss in the shared folder. The following procedure will insure correct operation of JAWS and SkypeWatch after such a change: 1. Copy defaultddjsb in the shared folder to defaultfsddjsb in the user folder. 2. Unload and reload JAWS once to reset its default behavior. JAWS 6.0 and Later Recovery Procedure The following procedure was worked out, tested, and reported to me by Roy Nickelson. Thanks much to Roy for this. This procedure applies if JAWS stops functioning due to a mistake in the above JAWS 6.0 and later installation procedure. 1. Type Windows plus U to run Microsoft Narrator so you'll have speech during this procedure. If Windows plus U does not work on your system (a rare but possible problem), instead type Windows plus R, then the word Narrator, then Enter. 2. Type Windows plus R, then the word JAWS8 or JAWS71 or the appropriate command for your JAWS version, then Enter. Because JAWS is already running, this will bring up the Context menu for JAWS rather than running it again. 3. Type Alt plus Shift plus Fbled. This will bring up the "Exit JAWS?" dialog. The "shift" part of that command gets around any possible script attached to a plain Alt plus Fbled. 4. Press Enter to close JAWS. The keyboard will now become fully usable. 5. Launch the user settings folder by going to the Start menu, then All Programs, then your JAWS version, then Explore JAWS, and finally Explore My Settings. Be sure to use Explore My Settings, not Explore Shared Settings. 6. From the folder just opened, delete defaultddjsb. This will restore JAWS' default behavior. 7. Close Narrator by Alt plus Tabbing to it and typing Alt plus Fbled. 8. Restart JAWS in your normal fashion. PS. Let me know if this helps, or I'm wrong.
