Seu adsl � da telef�nica? Se for, altere o DNS prim�rio para 200.204.0.10
----- Original Message ----- From: Mauricio Araujo <[EMAIL PROTECTED]> Date: Thu, 12 Jun 2003 19:34:45 -0300 To: [EMAIL PROTECTED] Subject: [slack-users] Configuracao adsl no Slack 9.0 > Ola pessoal! > > Instalei o slackware 9.0 e estou tendo problemas com a configuracao do adsl. > > Meu provedor eh o Terra (DNS primario 200.177.250.10 e DNS secundario > 200.246.248.10) > Meu modem eh um DSLink 200 U/E > > Abaixo segue a configuracao do pppoe. Quando dou um "adsl-start", ele > informa que estah conectado, mas quando dou um "ping www.terra.com.br" nada > acontece... > > Alguem pode me ajudar? > > [], > Mauricio Araujo > [EMAIL PROTECTED] > > #*********************************************************************** > # > # pppoe.conf > # > # Configuration file for rp-pppoe. Edit as appropriate and install in > # /etc/ppp/pppoe.conf > # > # NOTE: This file is used by the adsl-start, adsl-stop, adsl-connect and > # adsl-status shell scripts. It is *not* used in any way by the > # "pppoe" executable. > # > # Copyright (C) 2000 Roaring Penguin Software Inc. > # > # This file may be distributed under the terms of the GNU General > # Public License. > # > # LIC: GPL > # $Id: pppoe.conf,v 1.10 2002/04/09 17:28:38 dfs Exp $ > #*********************************************************************** > > # When you configure a variable, DO NOT leave spaces around the "=" sign. > > # Ethernet card connected to ADSL modem > ETH='eth0' > > # ADSL user name. You may have to supply "@provider.com" Sympatico > # users in Canada do need to include "@sympatico.ca" > # Sympatico uses PAP authentication. Make sure /etc/ppp/pap-secrets > # contains the right username/password combination. > # For Magma, use [EMAIL PROTECTED] > USER='[EMAIL PROTECTED]' > > # Bring link up on demand? Default is to leave link up all the time. > # If you want the link to come up on demand, set DEMAND to a number indicating > # the idle time after which the link is brought down. > DEMAND=no > #DEMAND=300 > > # DNS type: SERVER=obtain from server; SPECIFY=use DNS1 and DNS2; > # NOCHANGE=do not adjust. > DNSTYPE=SPECIFY > > # Obtain DNS server addresses from the peer (recent versions of pppd only) > # In old config files, this used to be called USEPEERDNS. Changed to > # PEERDNS for better Red Hat compatibility > PEERDNS=no > > DNS1=200.177.250.10 > DNS2=200.246.248.10 > > # Make the PPPoE connection your default route. Set to > # DEFAULTROUTE=no if you don't want this. > DEFAULTROUTE=yes > > ### ONLY TOUCH THE FOLLOWING SETTINGS IF YOU'RE AN EXPERT > > # How long adsl-start waits for a new PPP interface to appear before > # concluding something went wrong. If you use 0, then adsl-start > # exits immediately with a successful status and does not wait for the > # link to come up. Time is in seconds. > # > # WARNING WARNING WARNING: > # > # If you are using rp-pppoe on a physically-inaccessible host, set > # CONNECT_TIMEOUT to 0. This makes SURE that the machine keeps trying > # to connect forever after adsl-start is called. Otherwise, it will > # give out after CONNECT_TIMEOUT seconds and will not attempt to > # connect again, making it impossible to reach. > CONNECT_TIMEOUT=30 > > # How often in seconds adsl-start polls to check if link is up > CONNECT_POLL=2 > > # Specific desired AC Name > ACNAME= > > # Specific desired service name > SERVICENAME= > > # Character to echo at each poll. Use PING="" if you don't want > # anything echoed > PING="." > > # File where the adsl-connect script writes its process-ID. > # Three files are actually used: > # $PIDFILE contains PID of adsl-connect script > # $PIDFILE.pppoe contains PID of pppoe process > # $PIDFILE.pppd contains PID of pppd process > CF_BASE=`basename $CONFIG` > PIDFILE="/var/run/$CF_BASE-adsl.pid" > > # Do you want to use synchronous PPP? "yes" or "no". "yes" is much > # easier on CPU usage, but may not work for you. It is safer to use > # "no", but you may want to experiment with "yes". "yes" is generally > # safe on Linux machines with the n_hdlc line discipline; unsafe on others. > SYNCHRONOUS=no > > # Do you want to clamp the MSS? Here's how to decide: > # - If you have only a SINGLE computer connected to the ADSL modem, choose > # "no". > # - If you have a computer acting as a gateway for a LAN, choose "1412". > # The setting of 1412 is safe for either setup, but uses slightly more > # CPU power. > CLAMPMSS=1412 > #CLAMPMSS=no > > # LCP echo interval and failure count. > LCP_INTERVAL=10 > LCP_FAILURE=3 > > # PPPOE_TIMEOUT should be about 4*LCP_INTERVAL > PPPOE_TIMEOUT=40 > > # Firewalling: One of NONE, STANDALONE or MASQUERADE > FIREWALL=STANDALONE > > # Linux kernel-mode plugin for pppd. If you want to try the kernel-mode > # plugin, use LINUX_PLUGIN=/etc/ppp/plugins/rp-pppoe.so > LINUX_PLUGIN= > > # Any extra arguments to pass to pppoe. Normally, use a blank string > # like this: > PPPOE_EXTRA="" > > # Rumour has it that "Citizen's Communications" with a 3Com > # HomeConnect ADSL Modem DualLink requires these extra options: > # PPPOE_EXTRA="-f 3c12:3c13 -S ISP" > > # Any extra arguments to pass to pppd. Normally, use a blank string > # like this: > PPPD_EXTRA="" > > > ########## DON'T CHANGE BELOW UNLESS YOU KNOW WHAT YOU ARE DOING > # If you wish to COMPLETELY overrride the pppd invocation: > # Example: > # OVERRIDE_PPPD_COMMAND="pppd call dsl" > > # If you want adsl-connect to exit when connection drops: > # RETRY_ON_FAILURE=no > > > > > _______________________________________________ > slack-users mailing list > [EMAIL PROTECTED] > http://www.linuxmag.com.br/mailman/listinfo/slack-users ################################################## Vict�rio H. Felipe linux user #306117 - http://counter.li.org Slackware Linux: traditional and simple ################################################## -- ______________________________________________ http://www.linuxmail.org/ Now with e-mail forwarding for only US$5.95/yr Powered by Outblaze _______________________________________________ slack-users mailing list [EMAIL PROTECTED] http://www.linuxmag.com.br/mailman/listinfo/slack-users
