ola pessoal tom com slack 10.1 (baixei hoje)
ele instalou perfeitamente no meu pc NETVISTA p4 1800 GHZ 256MB RAMM 40 GB
HD
porem nao sobe o Xserver com mais de 640X420 :P
e tambem nao reconheceu a placa de REDE;
como faco para resolver esses 2 problemas ?
segue em anexo o meu HWCONF
-
class: OTHER
bus: PCI
detached: 0
driver: unknown
desc: "Intel Corp.|82801DB/DBM (ICH4) SMBus Controller"
vendorId: 8086
deviceId: 24c3
subVendorId: 1014
subDeviceId: 0267
pciType: 1
pcidom: 0
pcibus: 0
pcidev: 1f
pcifn: 3
-
class: OTHER
bus: PCI
detached: 0
driver: ich2rom
desc: "Intel Corp.|82801DB (ICH4) LPC Bridge"
vendorId: 8086
deviceId: 24c0
subVendorId: 0000
subDeviceId: 0000
pciType: 1
pcidom: 0
pcibus: 0
pcidev: 1f
pcifn: 0
-
class: OTHER
bus: PCI
detached: 0
driver: hw_random
desc: "Intel Corp.|82801BA/CA/DB/EB/ER Hub interface to PCI Bridge"
vendorId: 8086
deviceId: 244e
subVendorId: 0000
subDeviceId: 0000
pciType: 1
pcidom: 0
pcibus: 0
pcidev: 1e
pcifn: 0
-
class: OTHER
bus: PCI
detached: 0
driver: unknown
desc: "Intel Corp.|82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub
Interface"
vendorId: 8086
deviceId: 2560
subVendorId: ffff
subDeviceId: ffff
pciType: 1
pcidom: 0
pcibus: 0
pcidev: 0
pcifn: 0
-
class: OTHER
bus: USB
detached: 0
driver: unknown
desc: "Linux 2.6.5-1.358 ehci_hcd EHCI Host Controller"
usbclass: 9
usbsubclass: 0
usbprotocol: 0
usbbus: 1
usblevel: 0
usbport: 0
usbdev: 1
vendorId: 0000
deviceId: 0000
usbmfr: Linux 2.6.5-1.358 ehci_hcd
usbprod: EHCI Host Controller
-
class: OTHER
bus: USB
detached: 0
driver: unknown
desc: "Linux 2.6.5-1.358 uhci_hcd UHCI Host Controller"
usbclass: 9
usbsubclass: 0
usbprotocol: 0
usbbus: 2
usblevel: 0
usbport: 0
usbdev: 1
vendorId: 0000
deviceId: 0000
usbmfr: Linux 2.6.5-1.358 uhci_hcd
usbprod: UHCI Host Controller
-
class: OTHER
bus: USB
detached: 0
driver: unknown
desc: "Linux 2.6.5-1.358 uhci_hcd UHCI Host Controller"
usbclass: 9
usbsubclass: 0
usbprotocol: 0
usbbus: 3
usblevel: 0
usbport: 0
usbdev: 1
vendorId: 0000
deviceId: 0000
usbmfr: Linux 2.6.5-1.358 uhci_hcd
usbprod: UHCI Host Controller
-
class: OTHER
bus: USB
detached: 0
driver: unknown
desc: "Linux 2.6.5-1.358 uhci_hcd UHCI Host Controller"
usbclass: 9
usbsubclass: 0
usbprotocol: 0
usbbus: 4
usblevel: 0
usbport: 0
usbdev: 1
vendorId: 0000
deviceId: 0000
usbmfr: Linux 2.6.5-1.358 uhci_hcd
usbprod: UHCI Host Controller
-
class: NETWORK
bus: PCI
detached: 0
device: eth0
driver: e100
desc: "Intel Corp.|82801BD PRO/100 VE (LOM) Ethernet Controller"
network.hwaddr: 00:0D:60:08:B5:22
vendorId: 8086
deviceId: 1039
subVendorId: 1014
subDeviceId: 0267
pciType: 1
pcidom: 0
pcibus: 2
pcidev: 8
pcifn: 0
-
class: MOUSE
bus: PSAUX
detached: 0
device: input/mice
driver: generic3ps/2
desc: "PS/2 Generic Mouse"
-
class: AUDIO
bus: PCI
detached: 0
driver: snd-intel8x0
desc: "Intel Corp.|82801DB (ICH4) AC'97 Audio Controller"
vendorId: 8086
deviceId: 24c5
subVendorId: 1014
subDeviceId: 0267
pciType: 1
pcidom: 0
pcibus: 0
pcidev: 1f
pcifn: 5
-
class: CDROM
bus: IDE
detached: 0
device: hdc
driver: ignore
desc: "CRD-8482B"
-
class: VIDEO
bus: PCI
detached: 0
driver: Card:Intel 845
desc: "Intel Corp.|82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics
Device"
vendorId: 8086
deviceId: 2562
subVendorId: 1014
subDeviceId: 0267
pciType: 1
pcidom: 0
pcibus: 0
pcidev: 2
pcifn: 0
-
class: FLOPPY
bus: MISC
detached: 0
device: fd0
driver: unknown
desc: "3.5" 1.44MB floppy drive"
-
class: HD
bus: IDE
detached: 0
device: hda
driver: ignore
desc: "MAXTOR 6L040J2"
physical: 16383/16/63
logical: 65535/16/63
-
class: KEYBOARD
bus: PSAUX
detached: 0
driver: ignore
desc: "AT Translated Set 2 keyboard"
-
class: USB
bus: PCI
detached: 0
driver: ehci-hcd
desc: "Intel Corp.|82801DB (ICH4) USB2 EHCI Controller"
vendorId: 8086
deviceId: 24cd
subVendorId: 1014
subDeviceId: 0267
pciType: 1
pcidom: 0
pcibus: 0
pcidev: 1d
pcifn: 7
-
class: USB
bus: PCI
detached: 0
driver: uhci-hcd
desc: "Intel Corp.|82801DB (ICH4) USB UHCI #3"
vendorId: 8086
deviceId: 24c7
subVendorId: 1014
subDeviceId: 0267
pciType: 1
pcidom: 0
pcibus: 0
pcidev: 1d
pcifn: 2
-
class: USB
bus: PCI
detached: 0
driver: uhci-hcd
desc: "Intel Corp.|82801DB (ICH4) USB UHCI #2"
vendorId: 8086
deviceId: 24c4
subVendorId: 1014
subDeviceId: 0267
pciType: 1
pcidom: 0
pcibus: 0
pcidev: 1d
pcifn: 1
-
class: USB
bus: PCI
detached: 0
driver: uhci-hcd
desc: "Intel Corp.|82801DB (ICH4) USB UHCI #1"
vendorId: 8086
deviceId: 24c2
subVendorId: 1014
subDeviceId: 0267
pciType: 1
pcidom: 0
pcibus: 0
pcidev: 1d
pcifn: 0
-
class: IDE
bus: PCI
detached: 0
driver: unknown
desc: "Intel Corp.|82801DB (ICH4) Ultra ATA 100 Storage Controller"
vendorId: 8086
deviceId: 24cb
subVendorId: 1014
subDeviceId: 0267
pciType: 1
pcidom: 0
pcibus: 0
pcidev: 1f
pcifn: 1
DMESG netvista
Linux version 2.6.5-1.358 ([EMAIL PROTECTED]) (gcc version
3.3.3 20040412 (Red Hat Linux 3.3.3-7)) #1 Sat May 8 09:04:50 EDT 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fcf0000 (usable)
BIOS-e820: 000000000fcf0000 - 000000000fcfb000 (ACPI data)
BIOS-e820: 000000000fcfb000 - 000000000fd00000 (ACPI NVS)
BIOS-e820: 000000000fd00000 - 000000000fe80000 (usable)
BIOS-e820: 000000000fe80000 - 0000000010000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
0MB HIGHMEM available.
254MB LOWMEM available.
zapping low mappings.
On node 0 totalpages: 65152
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 61056 pages, LIFO batch:14
HighMem zone: 0 pages, LIFO batch:1
DMI present.
IBM machine detected. Enabling interrupts during APM calls.
IBM machine detected. Disabling SMBus accesses.
ACPI: RSDP (v000 PTLTD ) @ 0x000f6360
ACPI: RSDT (v001 PTLTD RSDT 0x060400d0 LTP 0x00000000) @ 0x0fcf73ec
ACPI: FADT (v001 IBM NETVISTA 0x060400d0 PTL 0x00000001) @ 0x0fcfaee2
ACPI: TCPA (v001 IBM NETVISTA 0x060400d0 PTL 0x00000001) @ 0x0fcfaf56
ACPI: MADT (v001 PTLTD APIC 0x060400d0 LTP 0x00000000) @ 0x0fcfaf88
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x060400d0 LTP 0x00000001) @ 0x0fcfafd8
ACPI: DSDT (v001 IBM Yelotail 0x060400d0 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
Built 1 zonelists
Kernel command line: ro root=LABEL=/ rhgb quiet
mapped 4G/4G trampoline to ffff3000.
Initializing CPU#0
CPU 0 irqstacks, hard=02345000 soft=02344000
PID hash table entries: 1024 (order 10: 8192 bytes)
Detected 1795.439 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Memory: 254932k/260608k available (1540k kernel code, 4904k reserved, 599k
data, 144k init, 0k highmem)
Calibrating delay loop... 3555.32 BogoMIPS
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
There is already a security framework initialized, register_security failed.
Failure registering capabilities with the kernel
selinux_register_security: Registering secondary module capability
Capability LSM initialized
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: After all inits, caps: 3febf3ff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU: Intel(R) Pentium(R) 4 CPU 1.80GHz stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd98d, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: IRQ9 SCI: Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SLOT._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *9 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even
'acpi=off'
Simple Boot Flag at 0x6c set to 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1115831375.513:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU0] (supports C1, 8 throttling states)
ACPI: Thermal Zone [THM0] (54 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 845G Chipset.
agpgart: Maximum main memory to use for agp memory: 202M
agpgart: Detected 892K stolen memory.
agpgart: AGP aperture is 128M @ 0x88000000
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ICH4: chipset revision 1
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio
hda: MAXTOR 6L040J2, ATA DISK drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: CRD-8482B, ATAPI CD/DVD-ROM drive
hdc: Disabling (U)DMA for CRD-8482B (blacklisted)
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 78177792 sectors (40027 MB) w/1819KiB Cache, CHS=65535/16/63, UDMA(100)
hda: hda1 hda2 hda3
hdc: ATAPI 48X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: PS/2 Generic Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S3 S4 S5)
checking if image is initramfs...it isn't (no cpio magic); looks like an
initrd
Freeing initrd memory: 186k freed
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 144k freed
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
ACPI: Power Button (FF) [PWRF]
ehci_hcd 0000:00:1d.7: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 9, pci mem 128a5000
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:00:1d.0: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 11, io base 00001800
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 10, io base 00001820
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 5, io base 00001840
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
EXT3 FS on hda2, internal journal
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: [EMAIL PROTECTED]
cdrom: open failed.
Adding 522104k swap on /dev/hda3. Priority:-1 extents:1
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
IA-32 Microcode Update Driver: v1.13 <[EMAIL PROTECTED]>
microcode: No suitable data for cpu 0
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
SCSI subsystem initialized
inserting floppy driver for 2.6.5-1.358
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
e100: Intel(R) PRO/100 Network Driver, 3.0.17
e100: Copyright(c) 1999-2004 Intel Corporation
divert: allocating divert_blk for eth0
e100: eth0: e100_probe: addr 0xc0100000, irq 11, MAC addr 00:0D:60:08:B5:22
divert: freeing divert_blk for eth0
ip_tables: (C) 2000-2002 Netfilter core team
e100: Intel(R) PRO/100 Network Driver, 3.0.17
e100: Copyright(c) 1999-2004 Intel Corporation
divert: allocating divert_blk for eth0
e100: eth0: e100_probe: addr 0xc0100000, irq 11, MAC addr 00:0D:60:08:B5:22
ip_tables: (C) 2000-2002 Netfilter core team
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
lp0: console ready
NET: Registered protocol family 10
Disabled Privacy Extensions on device 022db720(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
[drm] Initialized i830 1.3.2 20021108 on minor 0
mtrr: base(0x88020000) is not aligned on a size(0xf0000) boundary
mtrr: base(0x88020000) is not aligned on a size(0xf0000) boundary
mtrr: base(0x88020000) is not aligned on a size(0xf0000) boundary
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 49516 usecs
intel8x0: clocking to 48000
mtrr: base(0x88020000) is not aligned on a size(0xf0000) boundary
mtrr: base(0x88020000) is not aligned on a size(0xf0000) boundary
mtrr: base(0x88020000) is not aligned on a size(0xf0000) boundary
mtrr: base(0x88020000) is not aligned on a size(0xf0000) boundary
mtrr: base(0x88020000) is not aligned on a size(0xf0000) boundary
mtrr: base(0x88020000) is not aligned on a size(0xf0000) boundary
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
usb 1-2: new high speed USB device using address 2
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: LG Model: FlashDrive Rev: 2.00
Type: Direct-Access ANSI SCSI revision: 02
USB Mass Storage device found at 2
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
sda: Unit Not Ready, sense:
Current : sense key Unit Attention
Additional sense: Not ready to ready change, medium may have changed
SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
sda: assuming Write Enabled
sda: assuming drive cache: write through
sda: sda1
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
FAT: invalid media value (0xb9)
VFS: Can't find a valid FAT filesystem on dev sda.
FAT: invalid media value (0xb9)
VFS: Can't find a valid FAT filesystem on dev sda.
FAT: invalid media value (0xb9)
VFS: Can't find a valid FAT filesystem on dev sda.
--
GUS-BR - Grupo de Usuarios Slackware - BR
http://www.slackwarebrasil.org/
http://www.linuxmag.com.br/mailman/listinfo/slack-users
