Olá Lista,
Estou passando por um problema que ainda não consegui explicação pra
tal coisa.
Estou usando Slackware 12.0 Kernel HUGESMP 2.6.21.5
Possuo um micro que tem a placa de rede sis900 onboard.
Quando eu ligo micro e inicio o slackware a placa de rede não é
detectada, os modulos levantam mas a interface eth0 não sobe, mesmo se
remover o modulo, levantar novamente e tentar ifconfig eth0 up, não
tenho êxito.
Informações do sistema quando a placa NÃO funciona:
Nov 10 15:43:38 oliveira kernel: sis900.c: v1.08.10 Apr. 2 2006
Nov 10 15:43:38 oliveira kernel: ACPI: PCI Interrupt 0000:03:07.0[A] -
> GSI 18 (level, low) -> IRQ 17
Nov 10 15:43:38 oliveira kernel: 0000:03:07.0: No MII transceivers
found!
LSPCI -nnvb
03:07.0 Ethernet controller [0200]: Silicon Integrated Systems [SiS]
SiS900 PCI Fast Ethernet [1039:0900] (rev 02)
Subsystem: Silicon Integrated Systems [SiS] SiS900 10/100
Ethernet Adapter [1039:0900]
Flags: bus master, medium devsel, latency 32, IRQ 12
I/O ports at cc00
Memory at dfdff000 (32-bit, non-prefetchable)
Expansion ROM at dfdc0000 [disabled]
Capabilities: [40] Power Management version 1
lsmod
[EMAIL PROTECTED]:/home/rejane# lsmod
Module Size Used by
snd_seq_dummy 6788 0
snd_seq_oss 32896 0
snd_seq_midi_event 10112 1 snd_seq_oss
snd_seq 50640 5
snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 10508 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss 42784 0
snd_mixer_oss 18048 1 snd_pcm_oss
ipv6 254496 10
capability 7304 0
commoncap 9344 1 capability
lp 13736 0
parport_pc 27812 1
parport 34760 2 lp,parport_pc
pcspkr 6528 0
psmouse 39048 0
sis900 23552 0
mii 8576 1 sis900
shpchp 33172 0
iTCO_wdt 12964 0
snd_intel8x0 32412 0
snd_ac97_codec 98980 1 snd_intel8x0
ac97_bus 6016 1 snd_ac97_codec
snd_pcm 72068 3
snd_pcm_oss,snd_intel8x0,snd_ac97_codec
i2c_i810 8708 0
iTCO_vendor_support 7172 1 iTCO_wdt
snd_timer 22532 2 snd_seq,snd_pcm
snd 47204 9
snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
intel_agp 25116 1
ata_generic 9220 0
soundcore 9824 1 snd
evdev 11904 1
agpgart 31432 2 intel_agp
snd_page_alloc 11528 2 snd_intel8x0,snd_pcm
A Placa só funciona no Slackware quando eu reinicio o micro e dou boot
pelo Windows, depois reinicio novamente(Sem Interromper a energia) e
dou boot pelo Slackware que ela volta a funcionar.
Informações do sistema quando a placa funciona:
/VAR/LOG/MESSAGE
Nov 10 15:35:01 oliveira kernel: ACPI: PCI Interrupt 0000:03:07.0[A] -
> GSI 18 (level, low) -> IRQ 17
Nov 10 15:35:01 oliveira kernel: 0000:03:07.0: SiS 900 Internal MII
PHY transceiver found at address 1.
Nov 10 15:35:01 oliveira kernel: 0000:03:07.0: Using transceiver found
at address 1 as default
Nov 10 15:35:01 oliveira kernel: eth0: SiS 900 PCI Fast Ethernet at
0xcc00, IRQ 17, 00:11:5b:23:b8:c2.
LSPCI -NNVB
03:07.0 Ethernet controller [0200]: Silicon Integrated Systems [SiS]
SiS900 PCI Fast Ethernet [1039:0900] (rev 02)
Subsystem: Silicon Integrated Systems [SiS] SiS900 10/100
Ethernet Adapter [1039:0900]
Flags: bus master, medium devsel, latency 32, IRQ 12
I/O ports at cc00
Memory at dfdff000 (32-bit, non-prefetchable)
Expansion ROM at dfdc0000 [disabled]
Capabilities: [40] Power Management version 1
LSMOD
Module Size Used by
snd_seq_dummy 6788 0
snd_seq_oss 32896 0
snd_seq_midi_event 10112 1 snd_seq_oss
snd_seq 50640 5
snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 10508 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss 42784 0
snd_mixer_oss 18048 1 snd_pcm_oss
ipv6 254496 10
capability 7304 0
commoncap 9344 1 capability
lp 13736 0
parport_pc 27812 1
parport 34760 2 lp,parport_pc
pcspkr 6528 0
psmouse 39048 0
sis900 23552 0
snd_intel8x0 32412 0
snd_ac97_codec 98980 1 snd_intel8x0
ac97_bus 6016 1 snd_ac97_codec
snd_pcm 72068 3
snd_pcm_oss,snd_intel8x0,snd_ac97_codec
mii 8576 1 sis900
snd_timer 22532 2 snd_seq,snd_pcm
i2c_i810 8708 0
snd 47204 9
snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
soundcore 9824 1 snd
iTCO_wdt 12964 0
iTCO_vendor_support 7172 1 iTCO_wdt
snd_page_alloc 11528 2 snd_intel8x0,snd_pcm
intel_agp 25116 1
ata_generic 9220 0
agpgart 31432 2 intel_agp
evdev 11904 1
shpchp 33172 0
Mas se eu desligar o micro e dar boot pelo slackware volta a NÂO
funcionar e eu tenho que fazer o mesmo procedimento de entrar pelo
windows e depois pelo slackware pra conseguir funcionar essa placa de
rede.
Alguem tem alguma explicação e solução pra isso?!
Abraços
--~--~---------~--~----~------------~-------~--~----~
GUS-BR - Grupo de Usuários de Slackware Brasil
http://www.slackwarebrasil.org/
http://groups.google.com/group/slack-users-br
-~----------~----~----~----~------~----~------~--~---
