Daniel você não conseguiu colocar a resolução pra ficar 1280x800 não? Vou fazer as alterações aqui e ver se fica blz incluse trocar aonde tem 768 por 800 pra ver se roda blz, obs.
> Date: Fri, 5 Jun 2009 00:44:55 -0300 > From: [email protected] > To: [email protected] > Subject: [slack-users] Re: Video x Chipset SIS > > > Rodrigo, eu tenho um Intelbras i15 com a saída do lspci idêntica a sua, > exceto que tem alguns dispositivos a mais. > > Eu construi meu xorg.conf misturanto o original do slack com o do Fenix > Linux que veio com o note e uso resolução de 1280x???. Eu nunca terminei > de arrumar as configurações então tem lixo aí induvitávelmente, mas é > funcional. > > > --- xorg.conf --- > Section "ServerLayout" > Identifier "X.org Configured" > Screen 0 "Screen0" 0 0 > Screen 1 "screen1" RightOf "Screen0" > InputDevice "Mouse0" "CorePointer" > InputDevice "Keyboard0" "CoreKeyboard" > Option "AIGLX" "true" > EndSection > > Section "Files" > RgbPath "/usr/share/X11/rgb" > ModulePath "/usr/lib/xorg/modules" > FontPath "/usr/share/fonts/TTF" > FontPath "/usr/share/fonts/OTF" > FontPath "/usr/share/fonts/Type1" > FontPath "/usr/share/fonts/misc" > FontPath "/usr/share/fonts/75dpi/:unscaled" > EndSection > > Section "Module" > Load "glx" > Load "extmod" > Load "xtrap" > Load "record" > Load "GLcore" > Load "dbe" > Load "dri" > Load "freetype" > Load "type1" > EndSection > > Section "InputDevice" > Identifier "Keyboard0" > Driver "kbd" > Option "XkbModel" "abnt2" > Option "XkbLayout" "br" > Option "XkbRules" "xfree86" > EndSection > > Section "InputDevice" > Identifier "Mouse0" > Driver "mouse" > Option "Protocol" "auto" > Option "Device" "/dev/input/mice" > Option "ZAxisMapping" "4 5 6 7" > EndSection > > > Section "Device" > ### Available Driver options are:- > ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", > ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" > ### [arg]: arg optional > #Option "ShadowFB" # [<bool>] > #Option "DefaultRefresh" # [<bool>] > #Option "ModeSetClearScreen" # [<bool>] > Identifier "Card0" > Driver "vesa" > VendorName "Silicon Integrated Systems [SiS]" > BoardName "771/671 PCIE VGA Display Adapter" > BusID "PCI:1:0:0" > EndSection > > Section "Monitor" > Identifier "Monitor0" > Vendorname "Generic LCD Display" > Modelname "LCD Panel 1024x768" > Horizsync 31.5-48.0 > Vertrefresh 56.0 - 65.0 > modeline "800x...@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync > modeline "800x...@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync > modeline "1280x...@60" 80.14 1280 1344 1480 1680 768 769 772 795 > -hsync +vsync > modeline "1280x...@60" 74.48 1280 1336 1472 1664 720 721 724 746 > -hsync +vsync > Gamma 1.0 > EndSection > > > Section "Screen" > Identifier "Screen0" > Device "Card0" > Monitor "Monitor0" > Defaultdepth 24 > Option "RenderAccel" "true" > Option "AllowGLXWithComposite" "true" > Option "AddARGBGLXVisuals" "true" > Option "DisableGLXRottClipping" "true" > > SubSection "Display" > Depth 24 > Virtual 1280 768 > Modes "1280x...@60" "1280x...@60" "800x...@60" > "800x...@56" > EndSubSection > EndSection > > > Section "Extensions" > Option "Composite" "Enable" > EndSection > > > Section "DRI" > Mode 0666 > EndSection > > Section "device" # > Identifier "device1" > Boardname "vesa" > Busid "PCI:1:0:0" > Driver "vesa" > Screen 1 > EndSection > Section "screen" # > Identifier "screen1" > Device "Card0" > Defaultdepth 24 > Monitor "monitor1" > EndSection > Section "monitor" # > Identifier "monitor1" > Gamma 1.0 > EndSection > Section "ServerFlags" > EndSection > > ----------------- > > > rodrigo brito lira wrote: > > Ai galera o lspci. > > > > #lspci > > > > 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 671MX > > 00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS AGP Port > > (virtual PCI-to-PCI bridge) > > 00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS968 [MuTIOL > > Media IO] (rev 01) > > 00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01) > > 00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 > > Controller (rev 0f) > > 00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 > > Controller (rev 0f) > > 00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller > > 00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] 191 > > Gigabit Ethernet Adapter (rev 02) > > 00:05.0 SATA controller: Silicon Integrated Systems [SiS] AHCI IDE > > Controller (0106) (rev 03) > > 00:0f.0 Audio device: Silicon Integrated Systems [SiS] Azalia Audio > > Controller > > 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] > > 771/671 PCIE VGA Display Adapter (rev 10) > > > > > >> From: [email protected] > >> To: [email protected] > >> Subject: [slack-users] Re: Video x Chipset SIS > >> Date: Wed, 3 Jun 2009 21:39:45 -0300 > >> > >> > >> On Wed 03 Jun 2009 21:22:31 rodrigo brito lira wrote: > >> > Uma pequena grande pergunta. Alguem ja conseguiu instalar o driver > > de video > >> > da sis no slackware 12.2. Se ja conseguiram por favor me ajudem. > >> > >> envia a saída do lspci | grep -i vga > >> > >> -- > >> Herbert > >> > >> > > > > > > _________________________________________________________________ Emoticons e Winks super diferentes para o Messenger. Baixe agora, é grátis! http://specials.br.msn.com/ilovemessenger/pacotes.aspx --~--~---------~--~----~------------~-------~--~----~ GUS-BR - Grupo de Usuários de Slackware Brasil http://www.slackwarebrasil.org/ http://groups.google.com/group/slack-users-br Antes de perguntar: http://www.istf.com.br/perguntas/ Para sair da lista envie um e-mail para: [email protected] -~----------~----~----~----~------~----~------~--~---
