2009/8/10 Alexandre Marques <[email protected]>: > > > Salve pessoal > > Estou tentando conectar meu celular novo (Motorola Rokr EM28) no Slack 11 > mas estou com alguma dificuldade... > > O celular é reconhecido ao conectar o cabo USB no PC, vide syslog: > > Aug 10 18:48:29 Darkstar kernel: usb.c: USB device 2 (vend/prod > 0x22b8/0x41a1) > is not claimed by any active driver. > Aug 10 18:48:52 Darkstar kernel: uhci.c: ef40: host controller halted. > very bad > Aug 10 18:49:07 Darkstar kernel: usb.c: USB device 3 (vend/prod > 0x22b8/0x41a0) > is not claimed by any active driver. > Aug 10 18:49:10 Darkstar kernel: Vendor: MOTOROLA Model: Mobile Phone > Rev: 03e8 > Aug 10 18:49:10 Darkstar kernel: Type: Direct-Access ANSI SCSI revision: > 02 > Aug 10 18:49:10 Darkstar kernel: Attached scsi removable disk sda at scsi2, > channel 0, id 0, lun 0 > Aug 10 18:49:10 Darkstar kernel: SCSI device sda: 3858489 512-byte hdwr > sectors (1976 MB) > Aug 10 18:49:10 Darkstar kernel: sda: Write Protect is off > > > E abaixo um recorte da saída do comando dmesg: > > spurious 8259A interrupt: IRQ7. > hub.c: new USB device 00:1f.2-1, assigned address 2 > usb.c: USB device 2 (vend/prod 0x22b8/0x41a1) is not claimed by any active > driver. > uhci.c: ef40: host controller halted. very bad > usb.c: USB disconnect on device 00:1f.2-1 address 2 > hub.c: new USB device 00:1f.2-1, assigned address 3 > usb.c: USB device 3 (vend/prod 0x22b8/0x41a0) is not claimed by any active > driver. > Initializing USB Mass Storage driver... > usb.c: registered new driver usb-storage > scsi2 : SCSI emulation for USB Mass Storage devices > Vendor: MOTOROLA Model: Mobile Phone Rev: 03e8 > Type: Direct-Access ANSI SCSI revision: 02 > Attached scsi removable disk sda at scsi2, channel 0, id 0, lun 0 > SCSI device sda: 3858489 512-byte hdwr sectors (1976 MB) > sda: Write Protect is off > sda: > WARNING: USB Mass Storage data integrity not assured > USB Mass Storage device found at 3 > USB Mass Storage support registered. > usb.c: USB disconnect on device 00:1f.2-1 address 3 > CSLIP: code copyright 1989 Regents of the University of California > PPP generic driver version 2.4.2 > PPP BSD Compression module registered > PPP Deflate Compression module registered > hub.c: new USB device 00:1f.2-1, assigned address 4 > WARNING: USB Mass Storage data integrity not assured > USB Mass Storage device found at 4 > > > Ainda não sei qual é o 'device' e nem qual é o 'fstype' > para montar o despositivo... > > E nem sei se estou no caminho certo... > Alguém pode me ajudar? > > > Muito Obrigado > -- > Alexandre Marques > Linux User #460590 > > > > > >
Alexandre, eu tenhu um Motorola A1200. Nesse seu caso, vc monta o /dev/sda diretamente. E ele é FAT32. Um simples mount /dev/sda /mnt/tmp já resolve o seu problema. Mas já vou avisando que vc deve sempre desmontar o dispositivo antes de removê-lo. -- -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= >> necropresto - Slackware User << >> [email protected] << --~--~---------~--~----~------------~-------~--~----~ GUS-BR - Grupo de Usuários de Slackware Brasil http://www.slackwarebrasil.org/ http://groups.google.com/group/slack-users-br Antes de perguntar: http://www.istf.com.br/perguntas/ Para sair da lista envie um e-mail para: [email protected] -~----------~----~----~----~------~----~------~--~---
