Olá galera! Venho tentado gravar um dvd-rw no k3b mas sem sucesso. Consegui gravar em outro dvd-rw normalmente, segue abaixo o debug do erro. Meu groups: users tty disk dialout audio video cdrom plugdev burning ppp.
Abrss Devices ----------------------- TSSTcorp CDDVDW SH-S223B SB00 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD- RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD +R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/ R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump] [%7] System ----------------------- K3b Version: 1.91.0 KDE Version: 4.4.3 (KDE 4.4.3) QT Version: 4.6.2 Kernel: 2.6.33.4-smp Used versions ----------------------- cdrecord: 2.1.1a78 cdrecord ----------------------- scsidev: '/dev/sr0' devname: '/dev/sr0' scsibus: -2 target: -2 lun: -2 Warning: Open by 'devname' is unintentional and not supported. Linux sg driver version: 3.5.27 SCSI buffer size: 64512 /usr/bin/cdrecord: Warning: Cannot read drive buffer. /usr/bin/cdrecord: Warning: The DMA speed test has been skipped. Cdrecord-ProDVD-ProBD-Clone 2.01.01a78 (i686-pc-linux-gnu) Copyright (C) 1995-2010 Jörg Schilling TOC Type: 1 = CD-ROM Using libscg version 'schily-0.9'. Driveropts: 'burnfree' atapi: 1 Device type : Removable CD-ROM Version : 5 Response Format: 2 Capabilities : Vendor_info : 'TSSTcorp' Identifikation : 'CDDVDW SH-S223B ' Revision : 'SB00' Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM. Current: DVD-RW restricted overwrite Profile: DVD-R/DL sequential recording Profile: DVD-R/DL layer jump recording Profile: DVD+R/DL Profile: DVD+R Profile: DVD+RW Profile: DVD-RW sequential recording Profile: DVD-RW restricted overwrite (current) Profile: DVD-RAM Profile: DVD-R sequential recording Profile: DVD-ROM Profile: CD-RW Profile: CD-R Profile: CD-ROM Profile: Removable Disk Using generic SCSI-3/mmc-2 DVD-R/DVD-RW/DVD-RAM driver (mmc_dvd). Driver flags : NO-CD DVD MMC-3 SWABAUDIO BURNFREE Supported modes: PACKET SAO LAYER_JUMP Drive buf size : 1376256 = 1344 KB FIFO size : 4194304 = 4096 KB /usr/bin/cdrecord: Drive needs to reload the media to return to proper status. Track 01: data 3817 MB Total size: 3817 MB = 1954570 sectors Current Secsize: 2048 Trying to clear drive status. WARNING: Phys disk size 2297888 differs from rzone size 0! Prerecorded disk? WARNING: Phys start: 196608 Phys end 2494495 WARNING: Drive returns zero media size. Using media size from ADIP. Blocks total: 2297888 Blocks current: 2297888 Blocks remaining: 343318 Reducing transfer size from 64512 to 32768 bytes. Starting to write CD/DVD/BD at speed 4 in real SAO mode for single session. Last chance to quit, starting real write in 3 seconds. 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... /usr/bin/cdrecord: Input/output error. reserve_track_rzone: scsi sendcmd: no error CDB: 53 00 00 00 00 00 1D D3 0A 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 72 05 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x72 Qual 0x05 (no more track reservations allowed) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.000s timeout 200s /usr/bin/cdrecord: Cannot open next track. input buffer ready. BURN-Free is OFF. Turning BURN-Free on Writing time: 0.017s Average write speed 999.0x. Fixating... Fixating time: 0.003s /usr/bin/cdrecord: fifo had 128 puts and 0 gets. /usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. BURN-Free was not used. cdrecord command: ----------------------- /usr/bin/cdrecord -v gracetime=2 dev=/dev/sr0 speed=4 -sao driveropts=burnfree -data -tsize=1954570s - -- GUS-BR - Grupo de Usuários de Slackware Brasil http://www.slackwarebrasil.org/ http://groups.google.com/group/slack-users-br Antes de perguntar: http://www.istf.com.br/perguntas/ Para sair da lista envie um e-mail para: [email protected]
