>
> Corrigindo:
>
Dark acho que temos o mesmo processador, o modelo do meu note é um:
HP Pavilion DV5 br
Processador AMD Turion X2
3 gigas de Memoria
HD 250 Gigas
etc.
Se puder diga o que devo fazer para normalizar esta questão por favor?
Frequencias Suportadas no meu:
r...@slack:/# cpufreq-info | grep -m1 'available frequency' | grep -Po
'\d+(\.\d+)?\s+[a-zA-Z]*'
2.10 GHz
1.05 GHz
525 MHz
r...@slack:/# sensors-detect
# sensors-detect revision 5818 (2010-01-18 17:22:07 +0100)
# System: Hewlett-Packard HP Pavilion dv5 Notebook PC (laptop)
# Board: Quanta 30F2
This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.
Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no):
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
AMD K8 thermal sensors... No
AMD Family 10h thermal sensors... No
AMD Family 11h thermal sensors... Success!
(driver `k10temp')
Intel Core family thermal sensor... No
Intel Atom thermal sensor... No
Intel AMB FB-DIMM thermal sensor... No
VIA C7 thermal sensor... No
VIA Nano thermal sensor... No
Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no):
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... No
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... No
Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (YES/no):
Probing for `National Semiconductor LM78' at 0x290... No
Probing for `National Semiconductor LM79' at 0x290... No
Probing for `Winbond W83781D' at 0x290... No
Probing for `Winbond W83782D' at 0x290... No
Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no):
Using driver `i2c-piix4' for device 0000:00:14.0: ATI Technologies Inc
SB600/SB700/SB800 SMBus
Module i2c-dev loaded successfully.
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `k10temp' (autoloaded):
* Chip `AMD Family 11h thermal sensors' (confidence: 9)
No modules to load, skipping modules configuration.
Unloading i2c-dev... OK
r...@slack:/#
Qual a frequencia que voce aconselha que eu use, e como devo fazer o
processo corretamente?
Antecipadamente meus agradecimentos pela ajuda.
> _
> | °v° Linux
> | /(S)\ SLACKWARE 13.1 32bits
> | ^ ^
> ________________________________
>
>
> Em 10 de julho de 2010 21:09, dark <[email protected]> escreveu:
>
> Qual o modelo/marca do notebook?
>>
>> Existem alguns modelos da HP que te aconselho: atualize o firmware
>> O firmware default de alguns modelos pavilion são extremamente estúpidos,
>> não gerenciam o cooler como deveriam.
>>
>> Verifique se o módulo de gerenciamento de energia esta carregado (por ex:
>> aqui é um amd turion x2, módulo powernow_k8)
>>
>> Você pode, em todo caso, reduzir o clock da sua CPU para valores
>> suportados pela mesma:
>> Compilei um exemplo para demonstrar, de uma olhada:
>>
>> # Listo as frequencias suportadas pela minha CPU
>> r...@dark:~# cpufreq-info | grep -m1 'available frequency' | grep -Po
>> '\d+(\.\d+)?\s+[a-zA-Z]*'
>> 1.90 GHz
>> 1.80 GHz
>> 1.60 GHz
>> 800 MHz
>>
>> #Altero para 800 MHz
>> r...@dark:~# cpufreq-set -f 800MHz
>> # Confiro se a frenquencia corrente foi realmente alterada
>> r...@dark:~# cpufreq-info | grep current | grep is
>>
>> #Pode dar uma olhadinha também via lm_sensors
>>
>> r...@dark:~# sensors-detect
>> <aperta enter até o fim>
>>
>> r...@dark:thermal# sensors
>> k8temp-pci-00c3
>> Adapter: PCI adapter
>> Core0 Temp: +54.0 C
>> Core0 Temp: +47.0 C
>> Core1 Temp: +52.0 C
>> Core1 Temp: +53.0 C >
>>
>> Bom, é isso ai meu camarada, qualquer dúvida googleia ou entra no irc.
>>
>>
>> aveng3r on #slackware-br / irc.freenode.net
>>
>>
>>
>> On 07/10/2010 07:47 PM, Rodrigo Lira wrote:
>>
>>> Ola galera!
>>>
>>> É o seguine estava usando a versão 13.1 32bits, sendo que nesse final de
>>> semana instalei o 13.1 64bits e logo percebi que a temperatura esta bem
>>> maior chegando ate mesmo a desligar o notebook coisa que acontecia raramente
>>> no 13.1 32bits, queria saber se alguem pode mim ajudar a resolver o
>>> problema, agradeço antecipadamente a todos.
>>>
>>> Rodrigo Lira
>>> _
>>> | °v° Linux
>>> | /(S)\ SLACKWARE 13.1 32bits
>>> | ^ ^ ______________________________
>>> --
>>> GUS-BR - Grupo de Usuários de Slackware Brasil
>>> http://www.slackwarebrasil.org/
>>> http://groups.google.com/group/slack-users-br
>>>
>>> Antes de perguntar:
>>> http://www.istf.com.br/perguntas/
>>>
>>> Para sair da lista envie um e-mail para:
>>> [email protected]<slack-users-br%[email protected]>
>>>
>>
>> --
>> GUS-BR - Grupo de Usuários de Slackware Brasil
>> http://www.slackwarebrasil.org/
>> http://groups.google.com/group/slack-users-br
>>
>> Antes de perguntar:
>> http://www.istf.com.br/perguntas/
>>
>> Para sair da lista envie um e-mail para:
>> [email protected]<slack-users-br%[email protected]>
>
>
>
--
GUS-BR - Grupo de Usuários de Slackware Brasil
http://www.slackwarebrasil.org/
http://groups.google.com/group/slack-users-br
Antes de perguntar:
http://www.istf.com.br/perguntas/
Para sair da lista envie um e-mail para:
[email protected]
