Segue em anexo o log do Slax.
Coloquei o Kernel também, caso ajude em alguma coisa.
On Thursday, August 9, 2012 10:08:19 PM UTC-3, Ellington Santos wrote:
>
> Então. Eu disse pra você rodar o lspci -v dentro do slax.
>
>
> 2012/8/9 mbr2Xgd <[email protected] <javascript:>>
>
>> OK.
>>
>> Sim, eu postei 3 vezes, os outros 2 anteriores coloquei de forma errada,
>> por isso apaguei.
>>
>> E sobre o Linux, eu falei que conseguir dar o boot com Slax, mas não com
>> Slackware.
>> Esse Notebook é Japonês, só aceita o Windows XP com lingua do japão. É
>> notebook
>> totalmente exclusivo do Windows XP. O slack que eu tentei instalar é
>> 13.1, posso tentar
>> com 13.37, tanto faz. Vou encontrar o mesmo peoblema.
>>
>> Não tem essa opção na BIOS, e por sinal não sei por que tem a opção de
>> BIOS nesse notebook,
>> a única coisa que eu consegui mudar foi data e hora, o resto é apenas
>> status do Hardware.
>> Estou limitado aqui.
>>
>> Esse notebook não tem CD-ROM,
>> não tem como dar boot por pen drive.
>> O boot é direto do HD, estou usando o cabo USB(IDE/SATA) pra formatar e
>> criar a partições.
>>
>> O HD tem 2 partiçoes...
>>
>> Uma é SlackUSB do CD-ROM do Slack.
>> a segunda partição e onde quero colocar o Slack.
>>
>> De vários distros que eu peguei somente o slax, deu boot. Gosto do slax,
>> o único problema é que fica em uma partição vfat, tentei instalar o slax
>> com XFS.
>> Mas não deu certo.Esse partição vfat é uma problema pra perder arquivos.
>> Não é tão seguro como NTFS e XFS. No meu caso....
>>
>>
>> On Thursday, August 9, 2012 10:18:58 AM UTC-3, vic wrote:
>>>
>>> Em 2012-08-08 22:52, mbr2Xgd escreveu:
>>> > Olá todos.
>>> >
>>> > Eu estou com um notebook modelo dynabook E7/518PME Japonês,
>>> > onde só aceita o Windows XP Japonês. O único Linux que deu boot,
>>> > foi o Slax. No caso eu queria o Slackware...
>>> >
>>> > Durante o boot ele trava na tela:
>>> >
>>> > fNic: FCoE HBA Driver.
>>> >
>>>
>>> Olá.
>>>
>>> Antes de tudo quero parabenizá-lo por tentar usar o Slackware e
>>> aproveitar para dizer que
>>> _ninguém_gosta_de_ler_três_**vezes_a_mesma_mensagem.
>>>
>>> Qual versão do Slackware e do slax você tentou instalar?
>>>
>>> Esse erro parece que tem haver com um driver de fibra óptica. Você pode
>>> tentar desabilitar isso dispositivo na BIOS do seu notebook, exceto se
>>> você pretente usá-lo.
>>>
>>>
>>> --
>>> vic
>>> http://choppnerd.com
>>> http://donttrack.us | http://dontbubble.us
>>>
>> --
>> GUS-BR - Grupo de Usuários de Slackware Brasil
>> http://www.slackwarebrasil.org/
>> http://groups.google.com/group/slack-users-br
>>
>> Antes de perguntar:
>> http://www.istf.com.br/perguntas/
>>
>> Para sair da lista envie um e-mail para:
>> [email protected] <javascript:>
>
>
>
--
GUS-BR - Grupo de Usuários de Slackware Brasil
http://www.slackwarebrasil.org/
http://groups.google.com/group/slack-users-br
Antes de perguntar:
http://www.istf.com.br/perguntas/
Para sair da lista envie um e-mail para:
[email protected]
Linux version 2.6.27.27 (root@darkstar) (gcc version 4.2.4) #1 SMP Wed Jul 22
07:27:34 AKDT 2009
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d8000 - 00000000000e0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fef0000 (usable)
BIOS-e820: 000000001fef0000 - 000000001fefc000 (ACPI data)
BIOS-e820: 000000001fefc000 - 000000001ff00000 (ACPI NVS)
BIOS-e820: 000000001ff00000 - 000000001ff80000 (usable)
BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved)
BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
DMI present.
last_pfn = 0x1ff80 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
kernel direct mapping tables up to 1ff80000 @ 7000-d000
RAMDISK: 1fc6a000 - 1feeefea
ACPI: RSDP 000F68C0, 0014 (r0 TOSCPL)
ACPI: RSDT 1FEF6355, 0028 (r1 TOSCPL RSDT 6040000 LTP 0)
ACPI: FACP 1FEFBF8C, 0074 (r1 TOSCPL BTW20 6040000 PTL 1)
ACPI: DSDT 1FEF637D, 5C0F (r1 TOSCPL BTK20 6040000 MSFT 100000D)
ACPI: FACS 1FEFCFC0, 0040
ACPI: DMI detected: Toshiba
0MB HIGHMEM available.
511MB LOWMEM available.
mapped low ram: 0 - 1ff80000
low ram: 00000000 - 1ff80000
bootmap 00002000 - 00005ff0
(9 early reservations) ==> bootmem [0000000000 - 001ff80000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 0000976b10] TEXT DATA BSS ==> [0000100000 - 0000976b10]
#4 [001fc6a000 - 001feeefea] RAMDISK ==> [001fc6a000 - 001feeefea]
#5 [0000977000 - 000097b000] INIT_PG_TABLE ==> [0000977000 - 000097b000]
#6 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
#7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
#8 [0000002000 - 0000006000] BOOTMAP ==> [0000002000 - 0000006000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x0001ff80
HighMem 0x0001ff80 -> 0x0001ff80
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x0001fef0
0: 0x0001ff00 -> 0x0001ff80
On node 0 totalpages: 130831
free_area_init_node: node 0, pgdat c0881280, node_mem_map c1000000
DMA zone: 3967 pages, LIFO batch:0
Normal zone: 125841 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
SMP: Allowing 1 CPUs, 0 hotplug CPUs
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffb000 (01402000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d8000
PM: Registered nosave memory: 00000000000d8000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
PM: Registered nosave memory: 000000001fef0000 - 000000001fefc000
PM: Registered nosave memory: 000000001fefc000 - 000000001ff00000
Allocating PCI resources starting at 30000000 (gap: 20000000:dfb80000)
PERCPU: Allocating 39324 bytes of per cpu data
NR_CPUS: 32, nr_cpu_ids: 1, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129808
Kernel command line: initrd=/boot/initrd.gz ramdisk_size=6666 root=/dev/ram0 rw
changes=/slax/ BOOT_IMAGE=/boot/vmlinuz
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
TSC: PIT calibration confirmed by PMTIMER.
TSC: using PMTIMER calibration value
Detected 1792.709 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 507112k/523776k available (5828k kernel code, 15912k reserved, 1947k
data, 388k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffe18000 - 0xfffff000 (1948 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
lowmem : 0xc0000000 - 0xdff80000 ( 511 MB)
.init : 0xc08a5000 - 0xc0906000 ( 388 kB)
.data : 0xc06b1147 - 0xc0898118 (1947 kB)
.text : 0xc0100000 - 0xc06b1147 (5828 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency..
3585.41 BogoMIPS (lpj=7170836)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 34k freed
ACPI: Core revision 20080609
ACPI: setting ELCR to 0200 (from 0c00)
weird, boot CPU (#0) not listedby the BIOS.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (3585.41 BogoMIPS).
net_namespace: 768 bytes
xor: automatically using best checksumming function: pIII_sse
pIII_sse : 2356.000 MB/sec
xor: using function: pIII_sse (2356.000 MB/sec)
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd984, last bus=2
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: 0000:00:00.0 reg 10 32bit mmio: [e0000000, efffffff]
PCI: 0000:00:1d.0 reg 20 io port: [1860, 187f]
PCI: 0000:00:1d.1 reg 20 io port: [18c0, 18df]
PCI: 0000:00:1d.2 reg 20 io port: [1800, 181f]
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
PCI: 0000:00:1f.1 reg 10 io port: [0, 7]
PCI: 0000:00:1f.1 reg 14 io port: [0, 3]
PCI: 0000:00:1f.1 reg 18 io port: [0, 7]
PCI: 0000:00:1f.1 reg 1c io port: [0, 3]
PCI: 0000:00:1f.1 reg 20 io port: [1820, 182f]
PCI: 0000:00:1f.1 reg 24 32bit mmio: [0, 3ff]
PCI: 0000:00:1f.3 reg 20 io port: [1840, 185f]
PCI: 0000:00:1f.5 reg 10 io port: [1c00, 1cff]
PCI: 0000:00:1f.5 reg 14 io port: [1880, 18bf]
PCI: 0000:00:1f.6 reg 10 io port: [2400, 24ff]
PCI: 0000:00:1f.6 reg 14 io port: [2000, 207f]
PCI: 0000:01:00.0 reg 10 32bit mmio: [d8000000, dfffffff]
PCI: 0000:01:00.0 reg 14 io port: [3000, 30ff]
PCI: 0000:01:00.0 reg 18 32bit mmio: [d0100000, d010ffff]
PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff]
pci 0000:01:00.0: supports D1
pci 0000:01:00.0: supports D2
PCI: bridge 0000:00:01.0 io port: [3000, 3fff]
PCI: bridge 0000:00:01.0 32bit mmio: [d0100000, d01fffff]
PCI: bridge 0000:00:01.0 32bit mmio pref: [d8000000, dfffffff]
PCI: 0000:02:00.0 reg 10 32bit mmio: [d0204000, d02047ff]
PCI: 0000:02:00.0 reg 14 32bit mmio: [d0200000, d0203fff]
pci 0000:02:00.0: supports D1
pci 0000:02:00.0: supports D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
pci 0000:02:00.0: PME# disabled
PCI: 0000:02:01.0 reg 10 io port: [4000, 40ff]
PCI: 0000:02:01.0 reg 14 32bit mmio: [d0204800, d02048ff]
pci 0000:02:01.0: supports D1
pci 0000:02:01.0: supports D2
pci 0000:02:01.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:02:01.0: PME# disabled
PCI: 0000:02:04.0 reg 10 32bit mmio: [0, fff]
pci 0000:02:04.0: supports D1
pci 0000:02:04.0: supports D2
pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:04.0: PME# disabled
PCI: 0000:02:04.1 reg 10 32bit mmio: [0, fff]
pci 0000:02:04.1: supports D1
pci 0000:02:04.1: supports D2
pci 0000:02:04.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:04.1: PME# disabled
pci 0000:00:1e.0: transparent bridge
PCI: bridge 0000:00:1e.0 io port: [4000, 4fff]
PCI: bridge 0000:00:1e.0 32bit mmio: [d0200000, d02fffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
ACPI: PCI Interrupt Link [LNKC] (IRQs 9) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 9) *11
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 8 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
system 00:04: ioport range 0x200-0x20f has been reserved
system 00:04: ioport range 0x600-0x60f has been reserved
system 00:04: ioport range 0x700-0x70f has been reserved
system 00:04: ioport range 0x1000-0x107f has been reserved
system 00:04: ioport range 0x1180-0x11bf has been reserved
system 00:04: ioport range 0x1200-0x120f has been reserved
system 00:04: ioport range 0xfe00-0xfe01 has been reserved
system 00:04: iomem range 0xfebffc00-0xfebfffff has been reserved
system 00:04: iomem range 0xfff80000-0xffffffff could not be reserved
system 00:04: iomem range 0xfabf8000-0xfabf8fdf has been reserved
system 00:04: iomem range 0xfabfa000-0xfabfafdf has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0x3000-0x3fff
pci 0000:00:01.0: MEM window: 0xd0100000-0xd01fffff
pci 0000:00:01.0: PREFETCH window: 0x000000d8000000-0x000000dfffffff
pci 0000:02:04.0: CardBus bridge, secondary bus 0000:03
pci 0000:02:04.0: IO window: 0x004400-0x0044ff
pci 0000:02:04.0: IO window: 0x004800-0x0048ff
pci 0000:02:04.0: PREFETCH window: 0x30000000-0x33ffffff
pci 0000:02:04.0: MEM window: 0x3c000000-0x3fffffff
pci 0000:02:04.1: CardBus bridge, secondary bus 0000:07
pci 0000:02:04.1: IO window: 0x004c00-0x004cff
pci 0000:02:04.1: IO window: 0x001400-0x0014ff
pci 0000:02:04.1: PREFETCH window: 0x34000000-0x37ffffff
pci 0000:02:04.1: MEM window: 0x40000000-0x43ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1e.0: IO window: 0x4000-0x4fff
pci 0000:00:1e.0: MEM window: 0xd0200000-0xd02fffff
pci 0000:00:1e.0: PREFETCH window: 0x00000030000000-0x00000037ffffff
pci 0000:00:1e.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
pci 0000:02:04.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
pci 0000:02:04.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
pci 0000:02:04.1: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
pci 0000:02:04.1: setting latency timer to 64
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffff]
bus: 01 index 0 io port: [3000, 3fff]
bus: 01 index 1 mmio: [d0100000, d01fffff]
bus: 01 index 2 mmio: [d8000000, dfffffff]
bus: 01 index 3 mmio: [0, 0]
bus: 02 index 0 io port: [4000, 4fff]
bus: 02 index 1 mmio: [d0200000, d02fffff]
bus: 02 index 2 mmio: [30000000, 37ffffff]
bus: 02 index 3 io port: [0, ffff]
bus: 02 index 4 mmio: [0, ffffffff]
bus: 03 index 0 io port: [4400, 44ff]
bus: 03 index 1 io port: [4800, 48ff]
bus: 03 index 2 mmio: [30000000, 33ffffff]
bus: 03 index 3 mmio: [3c000000, 3fffffff]
bus: 07 index 0 io port: [4c00, 4cff]
bus: 07 index 1 io port: [1400, 14ff]
bus: 07 index 2 mmio: [34000000, 37ffffff]
bus: 07 index 3 mmio: [40000000, 43ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 2579k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NTFS driver 2.1.29 [Flags: R/O].
JFS: nTxBlock = 3984, nTxLock = 31876
SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
GFS2 (built Jul 22 2009 07:23:43) installed
msgmni has been set to 996
async_tx: api initialized (sync-only)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input1
ACPI: Lid Switch [LID]
input: Power Button (CM) as /class/input/input2
ACPI: Power Button (CM) [PWRB]
ACPI: CPU0 (power states: C1[C1] C2[C2])
processor ACPI0007:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
serial 0000:00:1f.6: PCI INT B disabled
Marking TSC unstable due to possible TSC halt in C2
ACPI: EC: non-query interrupt received, switching to interrupt mode
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
Uniform Multi-Platform E-IDE driver
piix 0000:00:1f.1: IDE controller (0x8086:0x248a rev 0x02)
pci 0000:00:1f.1: enabling device (0005 -> 0007)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
pci 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 9 (level, low) -> IRQ 9
piix 0000:00:1f.1: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1820-0x1827
ide1: BM-DMA at 0x1828-0x182f
Probing IDE interface ide0...
hda: TOSHIBA MK4018GAS, ATA DISK drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 78140160 sectors (40007 MB), CHS=65535/16/63
hda: cache flushes supported
hda: hda1
ide-floppy driver 1.00
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver 1.1-5[2456]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
sym53c416.c: Version 1.0.0-ac
qlogicfas: no cards were found, please specify I/O address and IRQ using
iobase= and irq= options<6>QLogic Fibre Channel HBA Driver: 8.02.01-k7
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.2.7
Copyright(c) 2004-2008 Emulex. All rights reserved.
Failed initialization of WD-7000 SCSI card!
DC390: clustering now enabled by default. If you get problems load
with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.011.
nsp32: loading...
ipr: IBM Power RAID SCSI Device Driver version: 2.4.1 (April 24, 2007)
RocketRAID 3xxx/4xxx Controller driver v1.3 (071203)
st: Version 20080504, fixed bufsize 32768, s/g segs 256
Driver 'st' needs updating - please use bus_type methods
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.07
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.07
Fusion MPT FC Host driver 3.04.07
Fusion MPT SAS Host driver 3.04.07
ohci1394 0000:02:00.0: enabling device (0110 -> 0112)
ohci1394 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[d0204000-d02047ff]
Max Packet=[2048] IR/IT contexts=[4/8]
usbmon: debugfs is not available
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001860
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 9 (level, low) -> IRQ 9
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 9, io base 0x000018c0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 9 (level, low) -> IRQ 9
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 9, io base 0x00001800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
sl811: driver sl811-hcd, 19 May 2005
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
raid6: int32x1 422 MB/s
raid6: int32x2 553 MB/s
raid6: int32x4 713 MB/s
raid6: int32x8 416 MB/s
raid6: mmxx1 1490 MB/s
raid6: mmxx2 1889 MB/s
raid6: sse1x1 895 MB/s
raid6: sse1x2 1645 MB/s
raid6: sse2x1 1592 MB/s
raid6: sse2x2 2026 MB/s
raid6: using algorithm sse2x2 (2026 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [email protected]
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Using IPI No-Shortcut mode
input: AT Translated Set 2 keyboard as /class/input/input3
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
EXT4-fs warning (device ram0): ext4_fill_super: extents feature not enabled on
this filesystem, use tune2fs.
EXT4-fs: ram0: not marked OK to use with test code.
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 388k freed
squashfs: version 3.4 (2008/08/26) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
aufs 20081208
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f31310047c9]
fuse init (API version 7.9)
Yenta: CardBus bridge found at 0000:02:04.0 [1179:ff00]
Yenta O2: res at 0x94/0xD4: ca/00
Yenta O2: enabling read prefetch/write burst
Yenta: ISA IRQ mask 0x08b8, PCI irq 10
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
cs: IO port probe 0x4000-0x4fff: clean.
pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x37ffffff
Yenta: CardBus bridge found at 0000:02:04.1 [1179:ff00]
Yenta: ISA IRQ mask 0x08b8, PCI irq 10
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#02) from #06 to #0a
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
cs: IO port probe 0x4000-0x4fff: clean.
pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x37ffffff
UDF-fs: No VRS found
GFS2: Unrecognized block device or mount point /dev/hda
GFS2: gfs2 mount does not exist
UDF-fs: No VRS found
GFS2: Unrecognized block device or mount point /dev/hda
GFS2: gfs2 mount does not exist
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 845G Chipset
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
intel_rng: FWH not detected
input: Video Bus as /class/input/input4
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ
10
8139too Fast Ethernet driver 0.9.28
8139too 0000:02:01.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
eth0: RealTek RTL8139 at 0x4000, 00:02:3f:8d:d2:f0, IRQ 10
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
ppdev: user-space parallel port driver
Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
Intel ICH 0000:00:1f.5: setting latency timer to 64
input: PS/2 Generic Mouse as /class/input/input5
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
intel8x0_measure_ac97_clock: measured 55316 usecs
intel8x0: clocking to 48000
input: PC Speaker as /class/input/input6
lp0: using parport0 (interrupt-driven).
lp0: console ready
eth0: link down
00:00.0 Host bridge: Intel Corporation 82845 845 [Brookdale] Chipset Host
Bridge (rev 05)
00:01.0 PCI bridge: Intel Corporation 82845 845 [Brookdale] Chipset AGP Bridge
(rev 05)
00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801CA/CAM USB Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801CA/CAM USB Controller #3 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 42)
00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801CA/CAM SMBus Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801CA/CAM AC'97 Audio
Controller (rev 02)
00:1f.6 Modem: Intel Corporation 82801CA/CAM AC'97 Modem Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M6 LY
02:00.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000
Controller (PHY/Link)
02:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
02:04.0 CardBus bridge: O2 Micro, Inc. OZ6933/711E1 CardBus/SmartCardBus
Controller (rev 01)
02:04.1 CardBus bridge: O2 Micro, Inc. OZ6933/711E1 CardBus/SmartCardBus
Controller (rev 01)
00:00.0 Host bridge: Intel Corporation 82845 845 [Brookdale] Chipset Host
Bridge (rev 05)
Subsystem: Toshiba America Info Systems Unknown device ff00
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Capabilities: [e4] Vendor Specific Information <?>
Capabilities: [a0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW+ Rate=x1
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:01.0 PCI bridge: Intel Corporation 82845 845 [Brookdale] Chipset AGP Bridge
(rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 96
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00003000-00003fff
Memory behind bridge: d0100000-d01fffff
Prefetchable memory behind bridge: d8000000-dfffffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp
00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB Controller #1 (rev
02) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Unknown device ff00
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 4: I/O ports at 1860 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller: Intel Corporation 82801CA/CAM USB Controller #2 (rev
02) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Unknown device ff00
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 9
Region 4: I/O ports at 18c0 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller: Intel Corporation 82801CA/CAM USB Controller #3 (rev
02) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Unknown device ff00
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 9
Region 4: I/O ports at 1800 [size=32]
Kernel driver in use: uhci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 42) (prog-if
00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=0a, sec-latency=64
I/O behind bridge: 00004000-00004fff
Memory behind bridge: d0200000-d02fffff
Prefetchable memory behind bridge: 30000000-37ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp
00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel modules: intel-rng, iTCO_wdt
00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 Controller (rev 02)
(prog-if 8a [Master SecP PriP])
Subsystem: Toshiba America Info Systems Unknown device ff00
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 1820 [size=16]
Region 5: Memory at 38000000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: PIIX_IDE
00:1f.3 SMBus: Intel Corporation 82801CA/CAM SMBus Controller (rev 02)
Subsystem: Toshiba America Info Systems Unknown device ff00
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 10
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
00:1f.5 Multimedia audio controller: Intel Corporation 82801CA/CAM AC'97 Audio
Controller (rev 02)
Subsystem: Toshiba America Info Systems Unknown device ff00
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 10
Region 0: I/O ports at 1c00 [size=256]
Region 1: I/O ports at 1880 [size=64]
Kernel driver in use: Intel ICH
Kernel modules: snd-intel8x0
00:1f.6 Modem: Intel Corporation 82801CA/CAM AC'97 Modem Controller (rev 02)
(prog-if 00 [Generic])
Subsystem: Toshiba America Info Systems Unknown device 0001
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 10
Region 0: I/O ports at 2400 [size=256]
Region 1: I/O ports at 2000 [size=128]
Kernel modules: snd-intel8x0m
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M6 LY
(prog-if 00 [VGA controller])
Subsystem: Toshiba America Info Systems Unknown device ff00
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR+ FastB2B+ DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 3000 [size=256]
Region 2: Memory at d0100000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at d0120000 [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW-
Rate=<none>
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: radeonfb
02:00.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000
Controller (PHY/Link) (prog-if 10 [OHCI])
Subsystem: Toshiba America Info Systems Unknown device ff00
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d0204000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at d0200000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
Kernel driver in use: ohci1394
Kernel modules: firewire-ohci
02:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Toshiba America Info Systems Unknown device ff00
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 4000 [size=256]
Region 1: Memory at d0204800 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: 8139too
Kernel modules: 8139cp, 8139too
02:04.0 CardBus bridge: O2 Micro, Inc. OZ6933/711E1 CardBus/SmartCardBus
Controller (rev 01)
Subsystem: Toshiba America Info Systems Unknown device ff00
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d0205000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 30000000-33fff000 (prefetchable)
Memory window 1: 3c000000-3ffff000
I/O window 0: 00004400-000044ff
I/O window 1: 00004800-000048ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
02:04.1 CardBus bridge: O2 Micro, Inc. OZ6933/711E1 CardBus/SmartCardBus
Controller (rev 01)
Subsystem: Toshiba America Info Systems Unknown device ff00
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin B routed to IRQ 10
Region 0: Memory at d0206000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=07, subordinate=0a, sec-latency=176
Memory window 0: 34000000-37fff000 (prefetchable)
Memory window 1: 40000000-43fff000
I/O window 0: 00004c00-00004cff
I/O window 1: 00001400-000014ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
