Hi,
Just for your information:
$ md5sum libev-4.15.tar.gz_seamonkey
bd3fe50a18a86f977f91cfc46783f52d libev-4.15.tar.gz_seamonkey
$ md5sum libev-4.15.tar.gz_wget
3a73f247e790e2590c01f3492136ed31 libev-4.15.tar.gz_wget
$ tar -xf libev-4.15.tar.gz_seamonkey
tar: This does not look like a tar archive
tar: Skipping to next header
tar: Exiting with failure status due to previous errors
$ bsdtar -xf libev-4.15.tar.gz_seamonkey
$ tar -xf libev-4.15.tar.gz_wget
$ bsdtar -xf libev-4.15.tar.gz_wget
Probably not the concern of SBo, but if the source of libev is
downloaded using web browser, e.g. SeaMonkey, it cannot be extracted
using tar.
As can be seen from the commands output above:
- MD5 sums are different, depending if the source was downloaded using
web browser or wget,
- tar is not able to extract the source downloaded using SeaMonkey, but
is able to extract source downloaded by wget,
- bsdtar can extract source downloaded using SeaMonkey and wget.
If using links, the MD5 is the same as for wget.
The moral is, don't use GUI tools ;)
--
Best regards,
Andrzej Telszewski
_______________________________________________
SlackBuilds-users mailing list
SlackBuilds-users@slackbuilds.org
http://lists.slackbuilds.org/mailman/listinfo/slackbuilds-users
Archives - http://lists.slackbuilds.org/pipermail/slackbuilds-users/
FAQ - http://slackbuilds.org/faq/
