The differences between the line I sent in my previous post and the
corresponding line from your last build is as below :
--- /tmp/working_scribus_words.txt 2017-08-05 19:51:25.288007196 +0200
+++ /tmp/non_working_scribus_words.txt 2017-08-05 19:53:34.080012943 +0200
@@ -45,7 +45,7 @@
I'm wondering why /usr/include/freetype2 is not found on your side. It
seems (but I can be wrong) that /usr/local/include is used instead of
/usr/include/freetype2. Maybe you have something in /usr/local/include
which cause your issue.
2017-08-05 18:27 GMT+02:00 Rich Shepard <rshep...@appl-ecosys.com>:
> On Sat, 5 Aug 2017, Sebastien BALLET wrote:
> I just built scribus 1.4.6 on a 14.1 vm without any issue.
> Then it must be something here that I don't recognize.
> Can you try to build it again in verbose mode and post the output. To do
>> that, you must pass "VERBOSE=1" to make, or run scribus.SlackBuild as
>> below :
>> $ VERBOSE=1 ./scribus.SlackBuild
> It still fails with the same error.
> What I notice in the output (scribus-build.txt.gz attached) is during
> configuration scribus is not going to build with qt3, and that's noted as
> being good. But, on line 49001 of the output file I see that the qt3
> is to be included. Makes no sense to me; I've qt4 and qt5 installed, but
> qt3. And what these have to do with freetype.h may be irrelevant.
> SlackBuilds-users mailing list
> Archives - https://lists.slackbuilds.org/pipermail/slackbuilds-users/
> FAQ - https://slackbuilds.org/faq/
SlackBuilds-users mailing list
Archives - https://lists.slackbuilds.org/pipermail/slackbuilds-users/
FAQ - https://slackbuilds.org/faq/