> > > > hi Andrew, > > > > usually you can install them, if they don't overlap with something > else... > > > > in this case and considered also that libindi is part of Slackware since > > this iteration of current (so it will be in the next stable release), > > IMHO, you could let the SlackBuild install them and then, still in the > > SlackBuild, move them away in the /usr/doc/firecapture-$VERSION > > directory, adding a note in the README that one has to manually copy the > > udev rule for his own hardware in the /etc/udev/rules.d directory. > > > > Matteo > > Yes, I concur that plopping the udev rules into /usr/doc/... might be > best now that INDI is in Slackware-Current. While libindi has a bunch > of driver and undev rules included, I will still be maintaining the > additional 3rd party drivers and libraries. I might need to do something > similar. > > libindi-drivers > libindi-libraries > > Looking at firecapture, there may be some camera library conflicts (ZWO > ASI for example), so you may need to reference and itemize in your README. > > https://drivers.indilib.org/cameras/ > > I was not aware of firecapture. Looks nifty. > > > -Ed > > Thanks Matteo and Ed.
I'll go with putting the rules in /usr/doc. Ed - I'll need to test the slackbuild on 15.0 in due course because I'm actually doing this on -current as it happens as it's on the laptop I use for astro stuff with kstars/ekos. Works very well. Thanks for your efforts getting that into slackware! I have noticed that the QHY libraries shipped with firecapture are slightly older than those in my libindi-libraries package, but I did adapt your slackbuilds for my needs as I needed the latest betas from QHY to support the minicam8. Again, I'll need to test this again on 15.0 with your vanilla slackbuilds. I'll report back if I learn anything from that. Andrew
_______________________________________________ SlackBuilds-users mailing list [email protected] https://lists.slackbuilds.org/mailman/listinfo/slackbuilds-users Archives - https://lists.slackbuilds.org/pipermail/slackbuilds-users/ FAQ - https://slackbuilds.org/faq/
