Peter,
Do you have any other advice suggestions on this problem? This is the output
I get for testcase #109 of the functional test suite which is
functional/multiplestores/code/copy.xml:
[tp] 109/210: functional/multiplestores/code/copy.xml
BUILD FAILED
file:/view/wburrows_cm/vob/pc/cm_slide/testsuite/build/build.xml:154:
execution failed: functional/multiplestores/code/copy.xml
I get the same failure for _all_ testcases in the
functional/multiplestores/code directory. The failure is catastrophic in
that it stops processing testcases from that point and exits the ant build.
It seems to be caused by the <repeater> element in the testcase. I modified
the above testcase to comment out the <repeater> element from the test cases
in that directory and they then work correctly and I no longer get a
catastrophic failure.
But what is wrong with the "<repeater>" elements in these test cases and why
do they run for you guys and not for me? :-)
Thanks,
Warwick
-----------------------------------------------------------
Warwick Burrows E2open
Senior Engineer 9600 Great Hills Trail, #325
http://www.e2open.com Austin TX 78759
-----------------------------------------------------------
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Friday, June 11, 2004 11:25 AM
To: [EMAIL PROTECTED]
Subject: RE: Slide testsuite in CVS HEAD
> Are the two extra file stores the only changes you made to run the
> testsuite? Ie. Do I need to make any other configuration changes from
> the defaults to either Tomcat or Slide to run the tests?
Yes, that should be all.
> Should _all_ of the
> tests in the test suite work? Ie. not just the functional
> tests but all of
> the others too?
No, unfortunately not all testsuites run (partly because the testcases are
not ready and partly because some testcases are stil Tamino specific). I
think what should run is:
- functional
- deltav
- binding (requires configuring the stores accordingly, i.e. using the
BindingStore)
- performance
Regards,
Peter
> -----Original Message-----
> From: Warwick Burrows [mailto:[EMAIL PROTECTED]
> Sent: Friday, June 11, 2004 17:26
> To: Nevermann, Dr., Peter
> Subject: RE: Slide testsuite in CVS HEAD
>
>
>
> Hi Peter,
>
> Thanks very much!
>
> Are the two extra file stores the only changes you made to run the
> testsuite? Ie. Do I need to make any other configuration changes from
> the defaults to either Tomcat or Slide to run the tests? Should
> _all_ of the
> tests in the test suite work? Ie. not just the functional
> tests but all of
> the others too?
>
> Thanks,
> Warwick
>
>
> -----------------------------------------------------------
> Warwick Burrows E2open
> Senior Engineer 9600 Great Hills Trail, #325
> http://www.e2open.com Austin TX 78759
> -----------------------------------------------------------
>
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]
>
> Sent: Friday, June 11, 2004 3:54 AM
> To: [EMAIL PROTECTED]
> Subject: RE: Slide testsuite in CVS HEAD
>
>
> Hi Warwick,
>
> please find attached an extension of the default Domain.xml
> files with 2
> additional stores configured to serve /slide/files_2 and
> /slide/files_secondCollection as needed for the testsuite.
>
> Regards,
> Peter
>
> > -----Original Message-----
> > From: Warwick Burrows [mailto:[EMAIL PROTECTED]
> > Sent: Wednesday, June 09, 2004 16:58
> > To: 'Slide Users Mailing List'
> > Subject: RE: Slide testsuite in CVS HEAD
> >
> >
> >
> > Hi,
> >
> > Can anyone give me instructions on how to configure a second file
> > store under "/slide/files_secondStore"? I'm running the testsuite
> > and it won't run
> > without this second store in place but there are no
> > instructions on how to
> > do it.
> >
> > Thanks,
> > Warwick
> >
> >
> > -----------------------------------------------------------
> > Warwick Burrows E2open
> > Senior Engineer 9600 Great Hills Trail, #325
> > http://www.e2open.com Austin TX 78759
> > -----------------------------------------------------------
> >
> >
> > -----Original Message-----
> > From: Warwick Burrows [mailto:[EMAIL PROTECTED]
> > Sent: Tuesday, June 08, 2004 10:50 AM
> > To: 'Slide Users Mailing List'
> > Subject: RE: Slide testsuite in CVS HEAD
> >
> >
> > Hi Oliver,
> >
> > How do I configure a second store with the name
> > "/slide/files_secondStore"? I don't even see where in Domain.xml the
> > first store was configured to have
> > the name "/slide/files". I just see that the content store is
> > stored under
> > "content"?
> >
> > Also, could my problems have been related to authentication? I had
> > authentication disabled until last night and today when I ran the
> > tests again (with no significant changes to Slide other than
> > enabling the Slide
> > Realm and authentication) I had far fewer failures -- though
> > I still get
> > failures for these tests:
> >
> > [tp] 1/210: functional\copy\code\copy201.xml
> > [tp] FAILED
> >
> > [tp] 83/210:
> > functional\lock\null-resources\lockNullCollection_lockChild.xml
> > [tp] FAILED
> >
> > [tp] 89/210:
> > functional\lock\null-resources\lockNullCollection_SearchParent.xml
> > [tp] FAILED
> >
> > [tp] 95/210:
> > functional\lock\null-resources\lockNullFile_SearchParent.xml
> > [tp] FAILED
> >
> > Thanks,
> > Warwick
> >
> >
> > -----------------------------------------------------------
> > Warwick Burrows E2open
> > Senior Engineer 9600 Great Hills Trail, #325
> > http://www.e2open.com Austin TX 78759
> > -----------------------------------------------------------
> >
> >
> > -----Original Message-----
> > From: Oliver Zeigermann [mailto:[EMAIL PROTECTED]
> > Sent: Tuesday, June 08, 2004 2:37 AM
> > To: Slide Users Mailing List
> > Subject: Re: Slide testsuite in CVS HEAD
> >
> >
> > I have just run the functional tests on 2.1M1 with *no errors*. All
> > lock tests run fine...
> >
> > One thing to note is you will have to mount a second store to
> > /slide/files_secondCollection for some tests.
> >
> > Cheers,
> >
> > Oliver
> >
> > Oliver Zeigermann wrote:
> > > Last time I had it run was just before the 2.0 release
> which was in
> > > early Mai. I will have a look at what may be wrong ASAP.
> > >
> > > Oliver
> > >
> > >
> > > Warwick Burrows wrote:
> > >
> > >> Hi guys,
> > >>
> > >> For those who worked on the M1 release recently, did you
> > also run the
> > >> testsuite in the CVS HEAD against it? I've pulled down and
> > built the
> > >> Slide M1 source, have deployed it to Tomcat 4.1.30 and
> > when running
> > >> the testsuite
> > >> I am getting a lot of failures. For example, with the
> > "tp.functional"
> > >> target
> > >> I get a lot of lock related test case failures. All of the
> > lock specific
> > >> test cases fail and any cases that should return a "423"
> > status it seems.
> > >> And then the functional suite just stops with an error at
> > test case
> > >> 130. I
> > >> have also tried some of the other test cases, eg. acl,
> > stores, etc and
> > >> they
> > >> fail too. Do you have any suggestions as to what might be
> > happening?
> > >> Have I
> > >> missed a configuration step somewhere?
> > >>
> > >> Thanks,
> > >> Warwick
> > >>
> > >>
> > >
> > >
> > >
> >
> ---------------------------------------------------------------------
> > > To unsubscribe, e-mail: [EMAIL PROTECTED]
> > > For additional commands, e-mail:
> [EMAIL PROTECTED]
> > >
> >
> >
> >
> ---------------------------------------------------------------------
> > To unsubscribe, e-mail: [EMAIL PROTECTED]
> > For additional commands, e-mail: [EMAIL PROTECTED]
> >
> >
> ---------------------------------------------------------------------
> > To unsubscribe, e-mail: [EMAIL PROTECTED]
> > For additional commands, e-mail: [EMAIL PROTECTED]
> >
> >
> ---------------------------------------------------------------------
> > To unsubscribe, e-mail: [EMAIL PROTECTED]
> > For additional commands, e-mail: [EMAIL PROTECTED]
> >
> >
>
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
