On Fri, 28 Jan 2000, Peter Vogel wrote:
> Thanks for all the various suggestions. I still haven't solved the
> problem but I'm getting lcoser I think.
>
> My key question for the moment is to do with the IP addresses I use for
> establishing the ppp0 link to Telstra. I'm using
> ifcfg-ppp0:REMIP="139.130.45.65" IPADDR="203.41.215.171"
>
> The 139 number is Telstra's router, and the 203 number is the address of
> my www server.
>
> If I set up virtual hosts and use eth0:1, eth0:2 etc at 203.41.215.161,
> 162 etc I cannot access any of these from outside. The only IP I can
> get from outsiude is the .171, and indeed if I change my ppp ifcfg to
> say .163 instead of .171, then I can get to only .163.
>
> So, first off, what is the correct thing to put in my ppp0
> configuration? My ip range is 203.41.215.161/27
AFAIK you should use the IP address 139.130.x.x that telstra gave it to
you for your ppp0 (a wild guest in here I think your IP address is
139.130.45.84). Then set 203.41.215.171 as an IP alias.
wim
--
SLUG - Sydney Linux Users Group Mailing List - http://www.slug.org.au
To unsubscribe send email to [EMAIL PROTECTED] with
unsubscribe in the text
