Hi all,
I obviously hit a dead spot as nobody could help with my problem. But here
is some more information about my ethernet cards and the error again..
Now, for some reason eth0 is getting mixed up or miss interpreted as having
eth2's MAC address.
Does anybody think that if changing ethernet eth2 to a different brand card
might do any help?
Any other ideas...???
eth0 Link encap:Ethernet HWaddr 00:00:21:CD:B3:33
inet addr:10.10.0.1 Bcast:10.10.0.255 Mask:255.255.255.0
eth0:1 Link encap:Ethernet HWaddr 00:00:21:CD:B3:33
inet addr:203.29.147.233 Bcast:203.29.147.255 Mask:255.255.255.0
eth1 Link encap:Ethernet HWaddr 00:00:21:CD:B3:59
inet addr:192.168.69.1 Bcast:192.168.69.255 Mask:255.255.255.0
eth2 Link encap:Ethernet HWaddr 00:00:21:D1:9D:2E
inet addr:203.21.207.2 Bcast:203.21.207.255 Mask:255.255.255.0
-----Original Message-----
From: [EMAIL PROTECTED]
Sent: Friday, 30 June 2000 8:22 AM
To: [EMAIL PROTECTED]
Subject: flip flop (citadel2k)
hostname: citadel2k
ip address: 10.10.0.1
ethernet address: 0:0:21:cd:b3:33
ethernet vendor: SC&C (PAM Soft&Hardware also reported)
old ethernet address: 0:0:21:d1:9d:2e
old ethernet vendor: SC&C (PAM Soft&Hardware also reported)
timestamp: Friday, June 30, 2000 8:21:58 +1000
previous timestamp: Friday, June 30, 2000 8:21:39 +1000
delta: 19 seconds
--
SLUG - Sydney Linux Users Group Mailing List - http://www.slug.org.au
To unsubscribe send email to [EMAIL PROTECTED] with
unsubscribe in the text
