PS there are some other people in the same boat as me as I found out after
the purchase.
.....
I have not heard of any one being able to get X11 to work......
http://eonehelp.tripod.com/
http://eonehelp.tripod.com/helpcenter/linux.htm
http://eonehelp.tripod.com/helpcenter/faq.htm#Location9
Grant Street
Four J's Asia Pacific
http://www.4js.com.au
Ph: +61 2 8912 4170
Fax: +61 2 8912 4179
Disclaimer: http://www.4js.com.au/Std/eDisclaim.html
> -----Original Message-----
> From: Grant Street [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, 13 July 2000 16:49
> To: '[EMAIL PROTECTED]'
> Subject: eone emachine
>
>
> Hello all
>
> I have puchased aen emachine eone (the pc that looks like an
> iMAC but is a PC there's lawyers involved as we speak and
> they no longer sel them). Flame away but it's compact cheap
> and looks good.
>
> After doing some research that the RAGE XL chip is supported
> I gave the go ahead and thought it would be ok......wrong. It
> has an on board Graphics chip and inbuilt monitor that can do
> 1024 at 60+ hz under windoze.
>
> I tried to install RH6.2 and it would not go into the
> Graphical install..... I have it installed just fine just
> that X does not work .......damnnnnn youuuuuuuu
>
> I need some help, I have tried Rage cards, SVGA and a simple
> monitor config but the monitor keeps blinking into powersave
> mode. It can detect the card etc but what it detects does not work.
>
> I was wondering if some one is a bit of a X guru could give
> me a hand or any know of any one?
>
> I'm getting desparate............
>
> I'm allready living in hell it can't get much worse.
>
> regards
>
> Grant Street
> Four J's Asia Pacific
> http://www.4js.com.au
> Ph: +61 2 8912 4170
> Fax: +61 2 8912 4179
> Disclaimer: http://www.4js.com.au/Std/eDisclaim.html
>
>
--
SLUG - Sydney Linux User Group Mailing List - http://slug.org.au/
More Info: http://slug.org.au/lists/listinfo/slug
