Hi all,
This is OT but seemed the best place to ask a question about routing etc.
I am having trouble connecting to one of the systems on my home network (I
know about the IP range - it will be fixed), I can't connect from my W2K
machine to a W98 machine, but believe the answer may not be in the OS.
Below is the current routing table, the W2K machine is 192.0.0.52 the W98
machine is 192.0.0.5 is there any reason that I should not be able to ping
or traceroute to the W98 machine? The server (NT) is 192.0.0.1 and I can
ping and connect to that, and I can connect to a print server also sittign
on the network using an IP address.
(I am waiting on acquiring a system I can setup as a Linux server to change
the server and the IP range - have tried two older systems so far but could
get the install to work on neither - funds are the problem)
C:\>route print
===========================================================================
Interface List
0x1 ........................... MS TCP Loopback interface
0x1000003 ...00 10 a4 f1 ff f0 ...... Xircom Ethernet 10/100 PC Card
===========================================================================
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.0.0.1
192.0.0.52 1
127.0.0.0 255.0.0.0 127.0.0.1
127.0.0.1 1
192.0.0.0 255.255.255.0 192.0.0.52 192.0.0.52
1
192.0.0.52 255.255.255.255 127.0.0.1 127.0.0.1 1
192.0.0.255 255.255.255.255 192.0.0.52 192.0.0.52 1
224.0.0.0 224.0.0.0 192.0.0.52
192.0.0.52 1
255.255.255.255 255.255.255.255 192.0.0.52 192.0.0.52 1
Default Gateway: 192.0.0.1
===========================================================================
Persistent Routes:
None
Simon Bryan
____________________________________
IT Manager
OLMC Parramatta
http://www.olmc.nsw.edu.au
____________________________________
--
SLUG - Sydney Linux User Group Mailing List - http://slug.org.au/
More Info: http://lists.slug.org.au/listinfo/slug
