Hi All,
I am a little confused at present. Lately everytime I boot into Linux (SuSE
7.3 Personal), nearly all the time now, my boot messages tell me that hdb3
(the / partition) was not unmounted cleanly, so it scans the disk.
Now when it shuts down, it tells me that is unmounting all the disks and hdb3
is supposedly unmounted. But the next time I boot in it tells me it is not
cleanly unmounted. I have checked all the included docs and have been to the
SuSe website, but I haven't found an answer.
The only thing I can think is I recently dleted Wine from my hardrive and
since then the problems have started. Does anyone have any ideas, or has
this happened to anyone else?
Regards
Paul
See part of boot log messages below,
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Mon Jan 28 10:01:56 2002
fbmngplay: no process killed
Run file system check on root for LVM activation
doneRemounting root file system (/) read/write for vgscan...
Scanning for LVM volume groups...
vgscan -- reading all physical volumes (this may take a while...)
vgscan -- "/etc/lvmtab" and "/etc/lvmtab.d" successfully created
vgscan -- WARNING: This program does not do a VGDA backup of your volume group
Activating LVM volume groups...
vgchange -- no volume groups found
Activating swap-devices in /etc/fstab...
doneChecking file systems...
fsck 1.24a (02-Sep-2001)
/dev/hdb3 was not cleanly unmounted, check forced.
/dev/hdb3: |= | 1.2%
[snipped] |========================================================| 100.0%
/dev/hdb3: 116909/948416 files (0.5% non-contiguous), 953591/1895670 blocks
/dev/hdb1: clean, 32/5664 files, 4193/22648 blocks
doneMounting local file systems...
proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/hdb1 on /boot type ext2 (rw)
doneActivating remaining swap-devices in /etc/fstab...
doneSetting up the CMOS clockdone
Setting up timezone datadone
Setting up loopback devicedone
Setting up hostnamedone
Mount SHM FS on /dev/shmdone
Configuring serial ports...
ttyS0 at 0x03f8 (irq = 4) is a 16550A
Configured serial ports
doneRunning /etc/init.d/boot.local
doneCreating /var/log/boot.msg
done<notice>killproc: kill(23,29)
Enabling syn flood protectiondone
Disabling IP forwardingdone
<notice>killproc: kill(23,3)
INIT: Entering runlevel: 5
Boot logging started on /dev/tty1(/dev/console) at Sun Jan 27 23:03:34 2002
Master Resource Control: previous runlevel: N, switching to runlevel: 5
--
SLUG - Sydney Linux User Group Mailing List - http://slug.org.au/
More Info: http://lists.slug.org.au/listinfo/slug
