Sorry the lsmod was wrong.. I did load the st module [root@www www]# lsmod Module Size Used by st 26016 0 (unused) autofs 11264 1 (autoclean) eepro100 16624 1 (autoclean) iptable_filter 2304 0 (autoclean) (unused) ip_tables 11072 1 [iptable_filter] cpqarray 16528 7 sd_mod 11680 0 (unused) scsi_mod 95072 2 [st sd_mod]
thanks, George Vieira Systems Manager Citadel Computer Systems P/L http://www.citadelcomputer.com.au > -----Original Message----- > From: George Vieira > Sent: Friday, 22 February 2002 3:59 PM > To: '[EMAIL PROTECTED]' > Subject: Rh7.1 with post tape drive install > > Hi all, > > I installed RH7.1 in a Compaq and later installed an AIT tape drive. Kudzu > didn't pick up the tape drive but when I do a `modprobe st` it loads > fine.. > > Problem is that I get a "No Such Device" error trying to `mt -f /dev/nst0 > status` the drive.. > > Here's my info: > > [root@www www]# cat /etc/modules.conf > alias eth0 eepro100 > alias scsi_hostadapter cpqarray > alias parport_lowlevel parport_pc > > > [root@www www]# lsmod > Module Size Used by > autofs 11264 1 (autoclean) > eepro100 16624 1 (autoclean) > iptable_filter 2304 0 (autoclean) (unused) > ip_tables 11072 1 [iptable_filter] > cpqarray 16528 7 > sd_mod 11680 0 (unused) > scsi_mod 95072 1 [sd_mod] > > > Any help appreciated.. > > > thanks, > George Vieira > Systems Manager > Citadel Computer Systems P/L > http://www.citadelcomputer.com.au > -- SLUG - Sydney Linux User Group Mailing List - http://slug.org.au/ More Info: http://lists.slug.org.au/listinfo/slug
