On Thu, 28 Mar 2002, Ben Buxton wrote: > > > 5) How do I know if the nic is operating @ 10 or 100mbps? I've used > > > 'ifconfig', seems like the nic is operating @ 10mbps, since > > > RX bytes:10546363 (10.0 Mb). If that's the case, how do I change it to > > > 100mbps? My nic does support 100mbps. :) > > > > No, the RX bytes: line indicates how much data has come into the > > interface. It doesn't indicate the speed. AFAIK, you can't find out the > > speed from the Linux box. You need to look at your switch and see what it > > tells you the port status is. > > I'll go against the grain and state that there are linux utilities > to let you do this. Go here: http://www.scyld.com/diag/index.html
Well, I *did* say AFAIK. :-) DaZZa -- SLUG - Sydney Linux User Group Mailing List - http://slug.org.au/ More Info: http://lists.slug.org.au/listinfo/slug
