On Wednesday 09 October 2002 4:37 am, Voytek Eymont wrote:
> just spotted this on the console:
>
> [xxx@xxx root]# hda: dma_intr: status=0x51 { DriveReady
> SeekComplete Error }
> hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
> hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
> hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
> hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
> ide0: reset: success
>
>
> how to test my hd, is that a big worry, the above message ?Not sure about the Linux way, but if you can get a seatools floppy, you can boot off it and either - if it is a seagate drive - use the seagate specific tools or otherwise use the generic setting. it will do a test of the mechanism and give you a report. Stay well and happy Heracles -- SLUG - Sydney Linux User's Group - http://slug.org.au/ More Info: http://lists.slug.org.au/listinfo/slug
