On Thu, 4 Dec 2003, Kevin Saenz wrote:
> I have a copy of my logs for vgetty has anyone who has made their linux
> box into an answering machine come across this problem?
> I am running vgetty from command line to test out my modem.
>
> 12/04 11:00:24 yS1 check for lockfiles
> 12/04 11:00:24 yS1 locking the line
> 12/04 11:00:24 yS1 lowering DTR to reset Modem
> 12/04 11:00:25 yS1 send: \dATQ0V1H0[0d]
> 12/04 11:00:26 yS1 waiting for ``OK'' ** found **
> 12/04 11:00:26 yS1 send: ATS0=0Q0&D3&C1[0d]
> 12/04 11:00:26 yS1 waiting for ``OK'' ** found **
> 12/04 11:00:26 yS1 mdm_send: 'ATI'
> 12/04 11:00:26 yS1 Generic Rockwell modem (56000)
> 12/04 11:00:26 yS1 mdm_send: 'ATI3'
> 12/04 11:00:26 yS1 mdm_send: 'ATI4'
> 12/04 11:00:26 yS1 additional info: '56000 BPS External Modem
> D56RSN-W1'
> 12/04 11:00:26 yS1 modem quirks: 0004
> 12/04 11:00:26 yS1 mdm_send: 'AT+FCLASS=2' -> OK
> 12/04 11:00:26 yS1 mdm_send: 'AT+FCLASS=0' -> OK
> 12/04 11:00:26 yS1 mdm_send: 'AT+FAA=1;+FCR=1' -> OK
> 12/04 11:00:26 yS1 mdm_send: 'AT+FBOR=0' -> OK
> 12/04 11:00:26 yS1 mdm_send: 'AT+FLID="49 115 xxxxxxxx"' -> OK
> 12/04 11:00:26 yS1 mdm_send: 'AT+FDCC=1,5,0,2,0,0,0,0' -> OK
> 12/04 11:00:26 yS1 detecting voice modem type
> 12/04 11:00:28 yS1 Rockwell detected
> 12/04 11:00:29 yS1 initializing ROCKWELL voice modem
> 12/04 11:00:29 yS1 vgetty: Modem returned ERROR
> 12/04 11:00:29 yS1 can't set transmit gain
> 12/04 11:00:29 yS1 vgetty: Modem returned ERROR
> 12/04 11:00:29 yS1 can't set record gain
The above 2 errors are 'normal'
> 12/04 11:00:31 yS1 waiting...
> 12/04 11:00:33 yS1 wfr: waiting for ``RING''
> 12/04 11:00:33 yS1 wfr: waiting for ``RING''
> 12/04 11:00:36 yS1 wfr: waiting for ``RING''
> 12/04 11:00:39 yS1 cannot set controlling tty (ioctl): Operation not
> permitted
> 12/04 11:00:39 yS1 >>> this might be caused because you have run
> mgetty/vgetty
> 12/04 11:00:39 yS1 >>> from the command line. Don't do that, use
> /etc/inittab!
> 12/04 11:00:39 yS1 reading ring_type ring configuration from config
> file /etc/m
> getty+sendfax/voice.conf
> 12/04 11:00:41 yS1 playing voice file
> /var/spool/voice/messages/standard.rmd
> 12/04 11:00:41 yS1 vgetty: No raw modem data header found
> 12/04 11:00:41 yS1 vgetty: Could not play greeting message
> 12/04 11:00:43 yS1 recording voice file
> /var/spool/voice/incoming/v-18689-10704
> 96041.rmd
> 12/04 11:00:43 yS1 Rockwell: Illegal sample rate (134634540)
> 12/04 11:00:43 yS1 vgetty: Illegal compression method 0xbfffeb60, speed
> 1346345
> 40
> 12/04 11:00:43 yS1 vgetty: Could not record a message
The above looks like a permissions problem on the /dev/ttyS1 device.
> > I have a swannsmart modem with data/fax/voice capabilities
> > I would like to use it as answering machine.
> > Has anyone tried to get the swannsmart modems to work as an
> > answering machine under linux?
> > Otherwise what modem works as an answering machine under Linux?
I happen to have used a Dynalink V1456VQE modem quite OK, I suspect all
the recent EXTERNAL SERIAL modems with voice have the same basic
capabilities.
--
---<GRiP>---
Electronic Hobbyist, Former Arcadia BBS nut, Occasional nudist,
Linux Guru, SLUG/AUUG/Linux Australia member, Sydney Flashmobber,
BMX rider, Walker, Raver & rave music lover, Big kid that refuses
to grow up. I'd make a good family pet, take me home today!
Do people actually read these things?
--
SLUG - Sydney Linux User's Group - http://slug.org.au/
More Info: http://lists.slug.org.au/listinfo/slug
