Hey gang, I seem to have loaded all the drivers correctly for my Twinhan (VisionPlus Vision DTV Terrestrial) card, but I'm getting 0 signal. Here's my dmesg output:
bttv: driver version 0.9.12 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). bttv0: Bt878 (rev 17) at 0000:02:05.0, irq: 17, latency: 64, mmio: 0xf8000000 bttv0: detected: Twinhan VisionPlus DVB-T [card=113], PCI subsystem ID is 1822:0001 bttv0: using: Twinhan DST + clones [card=113,insmod option] bttv0: gpio: en=00000000, out=00000000 in=00fb33fe [init] bttv0: using tuner=4 bttv0: add subdevice "dvb0" bt878: AUDIO driver version 0.0.0 loaded bt878: Bt878 AUDIO function found (0). bt878(0): Bt878 (rev 17) at 02:05.1, irq: 17, latency: 64, memory: 0xf8001000 attach: checking "SMBus AMD756 adapter at 80e0" attach: checking "ISA main adapter" attach: checking "bt878 #0 [hw]" find by pci: checking "bt878 #0 [hw]" attach: "bt878 #0 [hw]", to card 0 DVB: registering new adapter (DST). bt878 find by dvb adap: checking "DST" dst_check_ci: recognize DTTDIG DST type : terrestial TV DST type flags : DVB: registering frontend 0:0 (DST TERR)... Attempting to tune: $ tzap "Nine Guide" using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' tuning to 191625000 Hz status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | Any DVB users know what I'm doing wrong? - Jeff -- GVADEC 2004: Kristiansand, Norway http://2004.guadec.org/ "I'm taking no part in your merry 5-way clusterfuck - sort that mess out between yourselves." - Alexander Viro -- SLUG - Sydney Linux User's Group Mailing List - http://slug.org.au/ Subscription info and FAQs: http://slug.org.au/faq/mailinglists.html
