|
To the SLUG, My dial up modem doesn't connect to the internet. During the boot up process of Fedora 1 (on an IBM ThinkPad T21) I get the following message 'bring up interface dodo0: failed to activate dodo0 with error 2 failed'. The issue may be that Linux cannot find the modem on the serial port that I specified. I therefore used the 'wvdialconf mymodem' command and I got the following message repeated 15 times 'ircomm<*1>: ATQO V1 E1 -- ATQ) V1 E1 --failed at 9600 and 19200 baud'. At the end of the message wvdialconf mymodem said 'Sorry, no modem was detected! Is it in use by another program? Did you configure it properly with setserial?' The modem is a Bansia Wave SP and I have read on SLUG that this is supported by Linux. I have therefore come to the conclusion that the modem is not installed properly. Can anyone tell me how to install the modem properly? Thanks in anticipation Roger |
________________________________________________
Message sent using Dodo Internet Webmail Server
-- SLUG - Sydney Linux User's Group Mailing List - http://slug.org.au/ Subscription info and FAQs: http://slug.org.au/faq/mailinglists.html
