Hi any hardware heads, I've an intermittent issue with a tinkpad where
some mornings it comes up fine, finds it's eth0/eth1/eth2 and others its
just stuffed.
I fix it by booting into windows then back to linux. Don't ask me why
this works but it does!
I guess I'm asking, who to send this to? It seems a combo of lots of
things, mainly hardware detection gone wrong. It's 2.6.5 kernel, mdk.
I've attached the two dmesg boot start bits. There is an obvious diff
between them:
-->diff stuffedAironet.dmesg.log thisAironetStartWorked.dmesg.log
35c35
< Detected 1398.891 MHz processor.
---
> Detected 1399.235 MHz processor.
63,64c63,64
< ..... CPU clock speed is 1398.0605 MHz.
< ..... host bus clock speed is 99.0900 MHz.
---
> ..... CPU clock speed is 1398.0599 MHz.
> ..... host bus clock speed is 99.0899 MHz.
230a231,232
> ip1394: $Rev: 1175 $ Ben Collins <[EMAIL PROTECTED]>
> ip1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
234c236
< eth0: 0000:02:08.0, 00:0D:60:80:14:29, IRQ 11.
---
> eth1: 0000:02:08.0, 00:0D:60:80:14:29, IRQ 11.
247c249
< airo: MAC enabled eth1 0:2:8a:e2:3b:8
---
> airo: MAC enabled eth2 0:2:8a:e2:3b:8
279c281
< intel8x0_measure_ac97_clock: measured 49622 usecs
---
> intel8x0_measure_ac97_clock: measured 49623 usecs
293a296
> icmpv6: msg of unknown type
306a310
> eth2: no IPv6 routers present
The dmesg when it fails is this:
cat stuffedAironet.dmesg.log
Linux version 2.6.5 ([EMAIL PROTECTED]) (gcc version 3.3.2 (Mandrake Linux
10.0 3.3.2
-6mdk)) #1 Fri Apr 23 22:36:53 EST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000002ff60000 (usable)
BIOS-e820: 000000002ff60000 - 000000002ff78000 (ACPI data)
BIOS-e820: 000000002ff78000 - 000000002ff7a000 (ACPI NVS)
BIOS-e820: 000000002ff80000 - 0000000030000000 (reserved)
BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
767MB LOWMEM available.
On node 0 totalpages: 196448
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 192352 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI present.
IBM machine detected. Enabling interrupts during APM calls.
IBM machine detected. Disabling SMBus accesses.
ACPI: RSDP (v002 IBM ) @
0x000f6b40
ACPI: XSDT (v001 IBM TP-1Q 0x00002040 LTP 0x00000000) @
0x2ff6b67d
ACPI: FADT (v003 IBM TP-1Q 0x00002040 IBM 0x00000001) @
0x2ff6b700
ACPI: SSDT (v001 IBM TP-1Q 0x00002040 MSFT 0x0100000e) @
0x2ff6b8b4
ACPI: ECDT (v001 IBM TP-1Q 0x00002040 IBM 0x00000001) @
0x2ff77e0c
ACPI: TCPA (v001 IBM TP-1Q 0x00002040 PTL 0x00000001) @
0x2ff77e5e
ACPI: BOOT (v001 IBM TP-1Q 0x00002040 LTP 0x00000001) @
0x2ff77fd8
ACPI: DSDT (v001 IBM TP-1Q 0x00002040 MSFT 0x0100000e) @
0x00000000
ACPI: PM-Timer IO Port: 0x1008
Built 1 zonelists
Kernel command line: auto BOOT_IMAGE=EurekaIT_(2.6.5) ro root=306
devfs=mount ac
pi=ht resume=/dev/hda7 splash=silent PROFILE=eurekait
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 1398.891 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Memory: 773908k/785792k available (1771k kernel code, 11124k reserved,
790k data
, 268k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode...
Ok.
Calibrating delay loop... 2777.08 BogoMIPS
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
checking if image is initramfs...it isn't (no cpio magic); looks like an
initrd
Freeing initrd memory: 130k freed
CPU: After generic identify, caps: a7e9fbbf 00000000 00000000
00000000
CPU: After vendor identify, caps: a7e9fbbf 00000000 00000000
00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: After all inits, caps: a7e9fbbf 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel(R) Pentium(R) M processor 1400MHz stepping 05
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1398.0605 MHz.
..... host bus clock speed is 99.0900 MHz.
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f6b70
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xb60e, dseg 0x400
pnp: 00:0b: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0b: ioport range 0x1000-0x105f has been reserved
pnp: 00:0b: ioport range 0x1060-0x107f has been reserved
pnp: 00:0b: ioport range 0x1180-0x11bf has been reserved
PnPBIOS: 22 nodes reported by PnP BIOS; 22 recorded by driver
ACPI: ACPI tables contain no PCI IRQ routing entries
PCI: Invalid ACPI-PCI IRQ routing table
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Transparent bridge - 0000:00:1e.0
PCI: Discovered primary peer bus 09 [IRQ]
PCI: Using IRQ router PIIX/ICH [8086/24cc] at 0000:00:1f.0
PCI: IRQ 0 for device 0000:00:1f.1 doesn't match PIRQ mask - try
pci=usepirqmask
PCI: Found IRQ 11 for device 0000:00:1f.1
PCI: Sharing IRQ 11 with 0000:00:1d.2
PCI: Sharing IRQ 11 with 0000:02:00.2
PCI: Sharing IRQ 11 with 0000:02:02.0
vesafb: framebuffer at 0xe0000000, mapped to 0xf0800000, size 16320k
vesafb: mode is 800x600x16, linelength=1600, pages=16
vesafb: protected mode interface info at c000:5587
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
Simple Boot Flag at 0x35 set to 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
ikconfig 0.7 with /proc/config*
VFS: Disk quotas dquot_6.5.1
devfs: 2004-01-31 Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x1
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Console: switching to colour frame buffer device 100x37
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
PCI: Found IRQ 11 for device 0000:00:1f.6
PCI: Sharing IRQ 11 with 0000:00:1f.3
PCI: Sharing IRQ 11 with 0000:00:1f.5
PCI: Sharing IRQ 11 with 0000:02:00.1
pnp: Device 00:12 activated.
ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
PCI: Found IRQ 11 for device 0000:00:1f.1
PCI: Sharing IRQ 11 with 0000:00:1d.2
PCI: Sharing IRQ 11 with 0000:02:00.2
PCI: Sharing IRQ 11 with 0000:02:02.0
ICH4: chipset revision 1
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:pio, hdd:pio
hda: IC25N040ATMR04-0, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: Host Protected Area detected.
current capacity is 71445490 sectors (36580 MB)
native capacity is 78140160 sectors (40007 MB)
hda: 71445490 sectors (36580 MB) w/1740KiB Cache, CHS=65535/16/63,
UDMA(100)
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 >
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: PS/2 Generic Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
EISA: Probing bus 0 at eisa0
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 1
Resume Machine: resuming from /dev/hda7
Resuming from device hda7
Resume Machine: This is normal swap space
PM: Reading pmdisk image.
PM: Resume from disk failed.
BIOS EDD facility v0.13 2004-Mar-09, 1 devices found
Please report your BIOS at http://linux.dell.com/edd/results.html
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Mounted devfs on /dev
Freeing unused kernel memory: 268k freed
Real Time Clock Driver v1.12
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
USB Universal Host Controller Interface driver v2.2
PCI: Found IRQ 11 for device 0000:00:1d.0
PCI: Sharing IRQ 11 with 0000:01:00.0
PCI: Sharing IRQ 11 with 0000:02:00.0
uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB USB (Hub #1)
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 11, io base 00001800
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: Found IRQ 11 for device 0000:00:1d.1
uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB USB (Hub #2)
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 11, io base 00001820
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PCI: Found IRQ 11 for device 0000:00:1d.2
PCI: Sharing IRQ 11 with 0000:00:1f.1
PCI: Sharing IRQ 11 with 0000:02:00.2
PCI: Sharing IRQ 11 with 0000:02:02.0
uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB USB (Hub #3)
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 11, io base 00001840
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PCI: Found IRQ 11 for device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB USB2
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 11, pci mem f17f5000
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
EXT3 FS on hda6, internal journal
Adding 1082552k swap on /dev/hda7. Priority:-1 extents:1
SCSI subsystem initialized
imm: Version 2.05 (for Linux 2.4.0)
parport: PnPBIOS parport detected.
parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
ppa: Version 2.07 (for Linux 2.4.x)
Initializing USB Mass Storage driver...
drivers/usb/core/usb.c: registered new driver usb-storage
USB Mass Storage support registered.
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 855PM Chipset.
agpgart: Maximum main memory to use for agp memory: 690M
agpgart: AGP aperture is 256M @ 0xd0000000
NTFS driver 2.1.6 [Flags: R/O MODULE].
NTFS volume version 3.1.
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1172 $ Ben Collins <[EMAIL PROTECTED]>
PCI: Found IRQ 11 for device 0000:02:00.2
PCI: Sharing IRQ 11 with 0000:00:1d.2
PCI: Sharing IRQ 11 with 0000:00:1f.1
PCI: Sharing IRQ 11 with 0000:02:02.0
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11]
MMIO=[c0205000-c02057ff] Max
Packet=[2048]
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00061b031003544a]
eepro100.c:v1.09j-t 9/29/99 Donald Becker
http://www.scyld.com/network/eepro100.
html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin
<[EMAIL PROTECTED]
w.sw.com.sg> and others
PCI: Found IRQ 11 for device 0000:02:08.0
eth0: 0000:02:08.0, 00:0D:60:80:14:29, IRQ 11.
Board assembly 000000-000, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x04f4518b).
airo: Probing for PCI adapters
PCI: Found IRQ 11 for device 0000:02:02.0
PCI: Sharing IRQ 11 with 0000:00:1d.2
PCI: Sharing IRQ 11 with 0000:00:1f.1
PCI: Sharing IRQ 11 with 0000:02:00.2
airo: Found an MPI350 card
airo: MAC enabled eth1 0:2:8a:e2:3b:8
airo: Finished probing for PCI adapters
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
PCI: Found IRQ 11 for device 0000:02:00.0
PCI: Sharing IRQ 11 with 0000:00:1d.0
PCI: Sharing IRQ 11 with 0000:01:00.0
Yenta: CardBus bridge found at 0000:02:00.0 [1014:0532]
Yenta: ISA IRQ mask 0x0638, PCI irq 11
Socket status: 30000006
PCI: Found IRQ 11 for device 0000:02:00.1
PCI: Sharing IRQ 11 with 0000:00:1f.3
PCI: Sharing IRQ 11 with 0000:00:1f.5
PCI: Sharing IRQ 11 with 0000:00:1f.6
Yenta: CardBus bridge found at 0000:02:00.1 [1014:0532]
Yenta: ISA IRQ mask 0x0638, PCI irq 11
Socket status: 30000006
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x170-0x177 0x370-0x377
cs: IO port probe 0x0a00-0x0aff: clean.
inserting floppy driver for 2.6.5
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
drivers/usb/core/usb.c: registered new driver hiddev
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
NET: Registered protocol family 17
PCI: Found IRQ 11 for device 0000:00:1f.5
PCI: Sharing IRQ 11 with 0000:00:1f.3
PCI: Sharing IRQ 11 with 0000:00:1f.6
PCI: Sharing IRQ 11 with 0000:02:00.1
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 49622 usecs
intel8x0: clocking to 48000
Bluetooth: Core ver 2.4
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.1
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM ver 1.2
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
NET: Registered protocol family 10
Disabled Privacy Extensions on device c034acc0(lo)
IPv6 over IPv4 tunneling driver
Disabled Privacy Extensions on device c034acc0(lo)
mtrr: 0xe0000000,0x1000000 overlaps existing 0xe0000000,0x800000
[drm] Initialized radeon 1.9.0 20020828 on minor 0
mtrr: 0xe0000000,0x1000000 overlaps existing 0xe0000000,0x800000
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
PCI: Found IRQ 11 for device 0000:01:00.0
PCI: Sharing IRQ 11 with 0000:00:1d.0
PCI: Sharing IRQ 11 with 0000:02:00.0
atkbd.c: Unknown key released (translated set 2, code 0x7a on
isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
atkbd.c: Unknown key released (translated set 2, code 0x7a on
isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
eth1: no IPv6 routers present
--
SLUG - Sydney Linux User's Group Mailing List - http://slug.org.au/
Subscription info and FAQs: http://slug.org.au/faq/mailinglists.html
