[SLUG] Re: USB - Harddrive

Wed, 25 May 2005 03:02:02 -0700 

 Ok now we now that you have two UHCI usb controlers and
 therefor uhci_hcd.o kernel modul should be used (check with lsmod if
 loaded)

 Have you also checked syslog and dmesg,
 please send this information as well

 Regards

 Wolfgang



On Wed, 25 May 2005 19:20:09 +1000, dimitri <[EMAIL PROTECTED]> wrote:
done what you've asked, that's the output from it. No idea what it means, as I say, novice here. Hope to find help, thanks...
00:07.2 USB Controller: VIA Technologies, Inc. USB (rev 1a) (prog-if 00 [UHCI]) 
        Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
        Flags: bus master, medium devsel, latency 32, IRQ 11
        I/O ports at c400 [size=32]
        Capabilities: [80] Power Management version 2
00:07.3 USB Controller: VIA Technologies, Inc. USB (rev 1a) (prog-if 00 [UHCI]) 
        Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
        Flags: bus master, medium devsel, latency 32, IRQ 11
        I/O ports at c800 [size=32]
        Capabilities: [80] Power Management version 2
00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40) 
        Subsystem: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
        Flags: medium devsel, IRQ 3
        Capabilities: [68] Power Management version 2
00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 50) 
        Subsystem: VIA Technologies, Inc. VT82C686 AC97 Audio Controller
        Flags: medium devsel, IRQ 12
        I/O ports at cc00 [size=256]
        I/O ports at d000 [size=4]
        I/O ports at d400 [size=4]
        Capabilities: [c0] Power Management version 2
00:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 
        Subsystem: Realtek Semiconductor Co., Ltd. RT8139
        Flags: bus master, medium devsel, latency 32, IRQ 10
        I/O ports at dc00 [size=256]
        Memory at d7000000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [50] Power Management version 2
00:0f.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 
        Subsystem: Realtek Semiconductor Co., Ltd. RT8139
        Flags: bus master, medium devsel, latency 32, IRQ 11
        I/O ports at e000 [size=256]
        Memory at d7001000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [50] Power Management version 2
01:00.0 VGA compatible controller: Trident Microsystems CyberBlade/i1 (prog-if 00 [VGA]) 
        Subsystem: Unknown device 0001:0000
        Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 10
        Memory at d5800000 (32-bit, non-prefetchable) [size=8M]
        Memory at d6000000 (32-bit, non-prefetchable) [size=128K]
        Memory at d5000000 (32-bit, non-prefetchable) [size=8M]
        Expansion ROM at <unassigned> [disabled] [size=64K]
        Capabilities: [80] AGP version 1.0
        Capabilities: [90] Power Management version 1


wolfgang wrote:


Hi Dimitri,

check /var/log/syslog or /var/log/messages and replug you HardDrive

tail -f /var/log/syslog

also run dmesg for kernel messages.

lspci -v
should show you which controler is used, maybe you have the wrong kernel driver loaded. 
Which distribution and Kernel (uname -r) do you use?

Repost output and we can check more in detail.

Regards

Wolfgang
On Wed, 25 May 2005 18:37:19 +1000, dimitri <[EMAIL PROTECTED]> wrote:
I have RedHat Fedora installed and have troubles mounting my external USB HardDrive. Tried what ever I could find on the net and in forums but somehow I did not manage it. Still a novice. 

Any help out there, Thanks a lot...

Dimitri











--
SLUG - Sydney Linux User's Group Mailing List - http://slug.org.au/
Subscription info and FAQs: http://slug.org.au/faq/mailinglists.html

Reply via email to